SolidWorks

Introduction to solid works

This was the first item I made in solid works. The process needed me to make a circle, make multiple hole in the circle, extrude, and evenly duplicate. finally I put the last touches and put my name into it.

lesson 1-3 solid works

this is lesson 1 of solid works, This item required me to do some of the things That I did for the introduction. This is just the 1 out of 2 parts for an assembly. This part was pretty easy to make and relatively was the same process of making the last one besides having to make it a shell.

This is the second part used for the assembly and was pretty easy to make. The only challenge being making the ledge on the sides which was a new process to do.

finally lesson 3, this is putting the 2 parts together in an assembly and mating them to stay together or just have some parts together to make it look like it open and close and more.

Cube puzzle

Part 1

Part 2

Part 3

Part 4

Part 5

Part 6

Part 7

Final product

All of the seven parts you see above was put together in a assembly to make this cube.

Perfect Cube

I remade each part but, this time it is perfect with no gaps.

SolidWorks- Fillets

This is how the part slowly got developed as I went through the solid works tutorial "Fillets".

SolidWorks- Revolves and Sweeps

This part is from the Soildworks tutorial "Revolves and Sweeps".

Bowl and Spoon

SolidWorks-Pattern Features

Rolling pin

Lofts

Here is my progress of the solid works tutorial "Loft".

Real baseball bat

First I took a real bat then I measured important parts (where there is big change in diameter). After that was done I moved that into solid works as planes and put circles that matched the diameter at that point on the bat onto the planes. Then I used the "Loft" in solid works to combine the circles.

Here is the bat I used for the measurements.

Mouse Gestures

This is the mouse gestures tutorial in solidworks. The point of this tutorial is to customize and open the mouse gestures(first two images/gifs). The next thing it wanted me to do is make this rectangle with a hole while mostly using the mouse gestures.

Mouse gestures box

I made this box using as much mouse gestures as I could, it took sometime to get used to it and remember where each thing is on the mouse gesture wheel. Once I figured all of that out it made me faster at building the shape needed. Currently I changed all of the mouse gestures to make this shape(fillets, extrude, circle, rectangle, and smart dim) but, in the future I would rather put things on there that I use more often. For example I would probably move out the rectangle due to me not using it as much. Instead I would rather put something like sketch that I use a whole lot more.

3D Sketching

3D Sketching Initials

Page updated

Google Sites

Report abuse