Embedded Files
Fixture Cap
Fixture Cap
Orthographic projection of a fixture cap, 420mm*150mm*100mm.
This is the most difficult project I did, requiring research and in depth study of AutoCad commands I'd never heard of. During this project I learned abouting Projection Trimming and the ROTATE3D command, which both proved to be invaluable assets to the project's completion.
Dimensioned Engineering Drawing of Fixture Cap
Dimensioned Engineering Drawing of Fixture Cap
Isometric Wireframe of Fixture Cap*
Isometric Wireframe of Fixture Cap*
*Center lines do not display properly, instead they are shown as solid in the Isometric Wireframe.
Shaft Support
Shaft Support
Saddle Bracket
Saddle Bracket
Connecting Rod
Connecting Rod
Anchor Base
Anchor Base
The Tube Hanger uses many different circles and is oddly shaped, this was one of the more challenging items I did. The most challenging part was properly positioning the larger circles.
Tube Hanger
Tube Hanger
Tube Spacer
Tube Spacer
Although simple in appearance, the Tube Spacer was a real tricky project, numerous small measurements packed into such a small spaced required me to double check and guarantee my accuracy.
The Shaft Guide was a much needed break, simple and easy. This was one of my faster projects, done when I was more familiar with AutoCAD and simple in it's architecture.
Shaft Guide
Shaft Guide
Page updated
Google Sites
Report abuse