123 HP Printer Setup 4520

123.hp.com/envy4520 | HP Envy 4520 driver setup

123 HP Envy 4520 Printer Setup and Installation

123.hp.com envy 4520 Printer Fundamental features are: duplicate, filter, remote printing, AirPrint, two-sided duplex printing, touchscreen, Instant Ink prepared so you’ll never come up short on ink, and the sky is the limit from there.

Versatile printing: print from anyplace utilizing your cell phone or tablet with the free HP ePrint application, effectively print from your iPhone with AirPrint, print even without a system utilizing Wireless Direct printing. The software to access this can be obtained from 123.hp.com/envy4520.

HP envy 4520 printer control board is 2.65 creep CGD display; because of the 500 MHz printer processor combined with 128 MB DDR3 RAM.

Borderless photographs are printed right to the edge of the paper. You get wonderful photograph prints with no cutting!

2-sided printing: Allows you to print on the two sides of the page, cutting your paper use by up to half

Set aside to half on ink with HP Instant Ink: requested by your printer and conveyed to your entryway before you run out (discretionary membership required). Utilize Original HP 63 ink cartridges to print up to 2x the pages as topped off cartridges

123.hp.com/envy4520 printer USB setup

This is most primary method of connecting the printer to the PC or Laptop which allows for direct printing with no access from any other device.

Make your Printer and the Computer as close as possible.

The HP software installer will perform the steps for envy 4520 printer wireless network connection.

We can do Wireless Connection in two ways,

1. HP Auto Wireless Connect

2. The Printer Network Connection

For HP Auto Wireless Connect , select Yes, access my router-> Next.

Now, follow the on screen instructions to accomplish the HP Envy 4520 printer wireless network setup.

For Printer Network Screen, as per the on screen instructions, select one of the following:

If the HP Envy 4520 printer’s IP address is not displays, then select Not Connected -> Wireless Off -> Next

If you know your IP address of the HP Envy 4520 printer, then select Connected, enter the IP Address and then click Next. After that, follow the instructions provided in the screen to complete the HP Envy 4520 printer wireless setup Windows.

Place your printer and computer nearer to each other.

HP software installer performs the steps for printer wireless Connection.

Two possible ways are there for envy 4520 printer wireless setup

1. HP Auto Wireless Connect(Initial setup only)

2. Wireless setup using a USB connection.

For HP Auto Wireless Connect, you have to choose HP Envy 4520 and click Continue.

Then, follow the steps on screen to finish the wireless setup for the HP Envy 4520 printer.

If you want to do Printer wireless setup using a USB connection, you should connect your HP Envy 4520 printer with USB cable. Choose the printer and click continue.

Follow the on screen steps to complete the wireless setup for the HP Envy 4520 printer.

123 HP Envy 4520 Setup for Windows 7, 8, and 10 OS

You can either use Windows Printer Install Wizard to obtain the predefined drivers provided in the operating system or download the software directly from 123.hp.com/envy4520.

  • Download the Hp Envy 4520 Printer Driver software.

  • Run the Installation Wizard by turning on the printer.

  • Connect the USB cord from the HP Envy 4520 printer to the PC.

  • The printer will be connected to the PC, the Wizard will show driver accessible for your HP Envy 4520 printer.

  • Click on the suitable driver from the 123.hp.com/envy4520


123 HP Envy 4520 Setup For Mac OS

  • You can obtain the drivers for your HP envy 4520 printer from the link 123.hp.com/envy4520.

  • The first step is to connect the printer to the MAC through USB cord or to the network to which the MAC is connected.

  • Once the printer is connected run the downloaded software from 123.hp.com/envy4520 and proceed with the steps shown.

  • You can go to the system preference option on your MAC and go to printer settings. Procced with adding the printer to the MAC finishing the HP envy 4520 setup.