Light Setup

This Manual will give a step-by-step overview of how to use the Light Setup System - general overview. FIXTURE LIST FROM THE LIGHT CONSOLE

1.Technical Rider

2.Setup of the Light System

3.Lightshark SetUp

4.Executor Buttons

5.Fixture-List & Light Plot (Rig)

6.Shutting down

1.Technical Rider

Theatre Lights (old dimmer)

4 PAR (500W) prepared as Floorlights
2 Profiler

4 PCs
2 Fresnel
1 huge Profiler PANI

LED RGB Toplights

All colours and Strobo
Smoke Maschine vertically, DMX
10 Pinspots

Additional LEDs

4 LED-Bar RGB Stairville Striplights DJ light with Sound to Light
4 LED-Pars for mobil use
10 Pinspots

2.Setup of the Light System

Lightshark LS-1 with iPad

DOWNSTAIRS at the Bar
You can find the electricity box behind the fridge

TURN ON FUSE
Please make sure that the Light Switch (the button -4Q5, also labeled as "Licht") is turned UP - this means it is on

UPSTAIRS IN THE GALLERY:
This is the Lightshark-Console, which controls all Light Systems

UPSTAIRS IN THE GALLERY:
-Turn on the Lightshark-Console at the back on the On-Off Button.

- Make sure the slider all the way on the left (Master) of the Console is turned up to full

IPAD:
Turn on the Ipad (which should be placed on the Lightshark Console or underneath the Console)

Password: daslot

WIFI AND CONNECTION FOR IPAD:
Connect to the Wifi (if not connected already)
Wifi-Name: LS.1_NET

3.Lightshark SetUp

Lightshark App:
Open the Lightshark-App, which can be found in navigation bar at the bottom of the Ipad.
It is the button with the red shark

Preset Setup:
on the button left of the App, please switch to Page 2 (labeled as "PG-2") with the arrows (as shown in the image)

PAGE 2:
Once on Page 2, please click on the Zero and bring the slider up to your desired amount.

There are 7 Channels, each with different colour presets

Light Plot:
The Light Plot is also laminated on the Console

4.Executor Buttons

Executors:
they are present automations for some ext lights.??

At Das LOT we use them primarily for our strobes, haze/fog, pixel rails.

You can navigate to the Executors at the top of the screen and hold your finger down to activate them

Executors Program Preview

5.Fixture-List & Light Plot (Rig)

Please find below the Google Drive Folder with the following Documents:

For the LIGHT PLOT:
- "Overview_Lightplot_DasLOT" (please choose the most updated date)_ this is a visualization of the Light Plot /Grid in our Space

For the LIGHT FIXTURE:
- go to the folder "HC Mar/25"
- choose the document "Fixture List 2025.pdf".

6.Shutting down

Turn the Ipad off and put the Ipad case back

Turn the Lightshark Console off (power switch at the back)

Place the black cloth over the console

Please go downstairs and back to the Electricity Box (behind the fridge by the bar)

- make sure the Light Switch (Button -4Q5) is turned DOWN - meaning it is off.

Page updated

Google Sites

Report abuse