Coin Sorter

(Ferris, Cooper) Coin Sorter Challenge - Design Proposal

Process of me building my coinsorter

The beginning part of the coin sorter. This is the supports and hopper built on the first day of construction.

This is the second part of the build the ramp for the coin sorter.

I started building the slots for each individual coin

This is my circuit for the vibrating motor that I sodered togther

I have created a cut out for the switch on one of the support beams. I have glued the motot right underneath where the coins fall onto the ramp. I placed the batter pack all the way on the back side of the hopper to get it out of the way.

Engineering Notebook

Testing Videos and Photos

IMG_1661.MOV

All 4 quaters go into the quater slot but one Nickle went in the quater slot

3 nickles go into the correct slot but one Dime went into the nickle slot

All 4 penny's go into the penny slot but 1 Dime went into the penny slot

1 dime went into its correct dime slot

All 4 quaters went into the correct slot

3 Nickles went into the correct slot but 1 penny went into the nickle slot

3 penny's went into the correct slot but 1 dime went into the penny slot

3 dimes went into their correct slot

IMG_1664.MOV

Page updated

Google Sites

Report abuse