Internatioal Material Data System

2024-06-19
[VendorName]Primax: Upload GP & Send IMDS A123456789012 for XXXX proj.
Hi X-man ,

PMX PN: A123456789012
Part Name: OOoooooo oooo oooooo

請供應商備齊各均質材料第3方測試報告(RoHS、HF)、成份表、3TG責任礦產(CMRT report)，同步完成以下作業。
並請原廠製造商盡速完成IMDS上傳。謝謝。
Vendor shall prepare following 3 documents for each homogeneous material to upload.
GP Portal   https://gp.primax.com.tw/gpms_primax/
(1) 3rd party test reports(RoHS, HF)
(2) Ingredient lists(SDS)
(3) 3TG responsible minerals(CMRT report)
and asking manufacturer creating a IMDS MDS (Material Data Sheet) for us at the same time.
IMDS  https://www.mdsystem.com/imdsnt/faces/login
       IMDS ID# 176120 Primax Electronics Ltd.
IMDS user's Guide https://public.mdsystem.com/zh/web/imds-public-pages/tutorials

1) GP portal: 請盡速上傳測試報告、建立均質材料、完成物質調查表上傳。 GP Portal  https://gp.primax.com.tw/gpms_primax/
2) IMDS: 請原廠製造商盡速登入IMDS建立MDS資料。 致伸/東聚Primax Electronics Ltd. IMDS ID# 176120
https://www.mdsystem.com/imdsnt/faces/login
– IMDS(國際材料數據系統)是服務於汽車行業的材料數據系統，相關操作用戶手冊請至官網下載。
– https://public.mdsystem.com/zh/web/imds-public-pages/tutorials

下面問題: 將GP/IMDS混在一起寫了 要再做分辨

Ceramics 陶瓷宣告
99.0% Ceramic without declarable substances
Misc., not to declare 

A100004500100
Please submit MDS by IMDS system to Primax IMDS#ID: 176120
https://www.mdsystem.com/imdsnt/faces/login
TVS二極管貼片A593000040101退件原因:
4) FR-4 Board/FR-4 Board: 報告ETR23800857含有氟F=1990ppm, 請註明含氟化合物CASno並請確認是否為PFAS物質。
3) IMDS應由SFI Electronics同美企業建立上傳提交至Primax ID#: 176120
2) 成分表Halogn Free of TVS diode Composition Sheet未註明對應料號SFI0402TA120-0R05P-11
1) 成分表缺少Die、Moulding Compound等材質請重新確認並據實接露材質成分
螺絲A151200061030 

請修正IMDS退件原因: 

1) Modify component name "SIX LOBE DPMS 2X0.4PX6 ZnNi(Black) Cr3+ NYLOK-1" to "SCREW M2.0 X 0.4 D3.8".

2) Add published standard material SWRCH18A MDS#ID/Version: 63432742/3 by IMDS-Committee/ILI Metals to replace you created.
A651000001020  POWER PCB 1 +\-  FR4 L801D 6L 94V0 K

A651000001030  SENSOR BOA 1 +\-  FR4 L801D 6L 94V0 K
請修正IMDS退件原因: 

1) Substance copper should be included in material CCL, check please. CCL材料應包括Copper金屬銅箔。

2) Add published standard material "screen-/pad-/letterpress-/flexo printing ink" MDS#ID/Version: 9448512/4 by IMDS-Committee/ILI Metals.
      請新增IMDS組委會標準材料MDS#ID/Version: 9448512/4油墨。
      To replace Solder Mask if you confirmed that no need to declare any hazardous substance.  若確認材料無須宣告其他有害物質，請以IMDS組委會材料替代原Solder Mask。

PCB A657000000100退件原因:

1) ADHESIVE-D3450/D3450: 請依據SDS新增備註Epoxy resin於other/Adhesive物質右側說明欄位。

2) SOLDER MASK(Black)-R-500 FPMK/R-500 FPMK: 報告ETR23703697M01含氟239ppm，請確認氟化物名稱及CASno.是否為PFAS物質。

     請依據SDS內容成分組成確實新增CASno.182697-61-7及125051-32-3物質。

IMDS MDS#ID: 1319499328/2 退件原因 Reson of IMDS denial:

1) Modify Part/Item No. to A657000000100 and part Name/Description to "TRICAM POGO FPC" from "FPC".

      Remove all Trade name which should be blank if you don't know what name is, and could not the same with material name.

2) Remove liquids substance Butyl-acrylate 丙烯酸丁酯 CASno.141-32-2 if it does not residue in final PI product.

3) Check classification 7.2 Ceramics/glass in FR-4 is correct or not.  PCB不會有陶瓷玻璃

4) Remove liquids substance Toluene甲苯 CASno.108-88-3 in material D3450 if it no longer residue in final FPC.

      If you don't know which residual substance would be exist in final FPC, add standard published material "Screen-/pad-/letterpress-/flexo printing ink" MDS#ID/Version: 9448512/4 by IMDS-Committee to replace INK BLACK & WHITE.

PCBA651000001200定穎:
Sold mask 由廠商確認不會殘留有害物質後"建議"使用IMDS ID#9448512 / 4, 因為也不知道印刷混合使用的物質有多雜

輔耗材A980200000270 退件原因: 

1) MSDS顯示含有甲醇Methanol CAS no.67-56-1，為一級禁用物質、製程使用不可含有、RBA行業重點工藝化學品清單禁用物質。
CAS no.67-56-1成分名應為甲醇Methanol，MSDS名稱卻顯示為Formaldehyde甲醛，廠商應據實揭露正確組成、及化學物質比例。

2) 報告SZXEC2310152701其PBDEs以及PBBs的MDL值應為5，請修正。

3) 請提供HF鹵素測試報告。

輔耗材A980200000220

<PMX>測試報告CANEC23003972704氟F含量3380ppm，請提供氟化合物名稱及其CAS no.並確認是否為PFAS化合物

電阻A502051203406退件原因:
1) Modify weight to 0.7mg

2) Please modify description name to "Resistor 0402". 

3) Add standard material as follows by IMDS-Committee/ILI Metals to replace Ep-Ni & Ep-Sn waht you created.

Ep-Ni 73281475 / 2 IMDS-Committee / ILI Metals

Ep-Sn 73281477 / 2 IMDS-Committee / ILI Metals

InductorA621000014700銀河:2024-07-10
Amorphous 業界約定俗成泛指這類的被動元件粉末都泛稱陶瓷粉。精確來說，鐵粉並非陶瓷。
                            業界成分表都還是會把鐵粉稱呼為陶瓷粉末

610000135011 

2024-07-11
增你強歐姆龍

2024-06-18
A690300009700   貿強Rosenberger FAKRA E CODE AMS13A-40MZ5-E K
Rosenberger 只會提交IMDS，不會上傳或提供任何GP資料。 IMDS有提交，就直接Pass即可。 完成後下載IMDS報告回存GP系統當佐證
GP這邊則是由RD跑特殊後回傳系統, 轉特殊
TI也是差不多狀態, 由客服填寫系統, 儘量不要退

 What are the meanings of the criteria for Process Chemicals?
Process chemicals usually used within the production process but don't appear in the finished part. Substances listed in the substance group "Process Chemicals" include liquids (e.g. solvents), reactants (polymerization agent), and gases.

Verification of the use is required when these substances are added to a material in IMDS. Suppliers must indicate the chemical presence type when adding these substances if the portion is >0.1%. If the substance is not present in the final part, the supplier is requested to refrain from adding it in IMDS.

What are definitions of each "chemical presence type"?

"Intended" indicates that the liquid or gas is still present in the finished part at a significant level (generally greater than 0.1%). Most assembled parts are solids, and have no liquid or gas content, but there are a small number of parts that have liquids or gases for a specified use. Volatile substances evaporate揮發性物質蒸發 during production and are not contained in the finished part. These substances should not be entered into IMDS unless they are declarable, prohibited or SVHC according to GADSL. In this case they must always be declared, even below 0.1%.

"Residue"殘留物 is used if a small amount (generally less than 0.1%) of the chemical is left in the final part. This residue may be from a solvent where the majority of the solvent has evaporated, or may be a residue from a reaction.

"Impurity" can occur during the manufacturing of the material or part. These substances are not intentionally added to the material or part. The concentration in the material is minimal (generally less than 0.1%).