SolidWorks Year 2

Certification Prep Courses

SolidWorks Year 1

Objectives:

Build the part based on the engineering drawing provided, in an attempt to get a Mass Properties as close to the Volume as possible. within the reccomened time.

1.6 Hinge Part Target Volume: 24032 cubic millimeters Volume: 24032.34 mm3

2.4 Disk Part Target Volume: 42236 cubic millimeters Volume: 42236.00 mm3

3.4 Rod Part Target Volume: 9921 cubic millimeters Volume: 9921.01 mm3

4.16 Part Target Volume: 164805 cubic millimeters Volume: 164805.00 mm3

5.2 Plate Target Volume: 48824 cubic millimeters Volume: 48823.76 mm3

5.13 Sleeve Target Volume: 358642 cubic millimeters Volume: 358642.00 mm3

6.14 Ball Target Volume: 39945 cubic millimeters Volume: 39944.02 mm3

7.4 Berring Target Volume: 421 cubic millimeters Volume: 420.97 mm3

8.4 Carabiner Target Volume: 0.51 Cubic Inches Volume: 0.51 in3

Assembly Practice Problems