無線Wireless
2023-06-30
2023-06-30
End Product level
AI link
垂直
product
2023-05-26
樣本
2014-07
UL同意不放置2G55
字不可以拆開排列
E134780 2G55必須一起排列
I.T.E. ACCESSORY要放同一排,
I.T.E.後方有接縮寫點
若有多個工廠要申請廠別代碼, 並標示在logo附近
錯誤樣本
AI link
sample
尺寸 無要求最小需下方 ® 清楚可見, USA發證,
右邊C=Canada, 左邊US=USA, 兩邊都核可, 中間為發證機構
規定 1. 要加上UL File No. & I.T.E. ACCESSORY (縮寫要有點)
2. 設計完成圖面要傳給UL Inspaction center蓋核可章,後續工廠檢查才有憑據
位置 本體, 外包, 手冊 (可不標示,但等同放棄權益)
UL非官方logo, 等同財團法人機構
手冊 要有魁北克法文同時放上 (if product do not connect to PC/NB directly can be ingore)
For use only with UL Listed I.T.E. computer.
Pour utilisation uniquement avec un ordinateur I.T.E. répertorié (法文)
Battery product statement (replaceable )
CAUTION: Risk of Explosion if Battery is replaced by an Incorrect Type.
Dispose of Used Batteries According to the Instructions.
其他 因UL標示現場檢驗員比較容易有爭議, 建議設計好logo之後寄信去UL Inspection center蓋章後返回保存
其他
圖樣週圍的字義解釋: 其中
E134780 代表 : UL 給致伸產品所使用的專屬檔案編號,如為不同的產品類別(如延長線則為E200250),則UL會編排新的檔案編號給我們認證申請使用;當然個別的
客戶則有自己的專屬檔案代號,若客人需我們代為向UL申請時,則須提供授權信我們才可以代為申請。
2G55 代表目錄 : UL 編給我們公司的產品UL內部文件控制代碼。
I.T.E. ACCESSORY 代表: "資訊產品類" 的標注說明,不可省略,報告上已有控制必須要標示。
USA衛服部發證
2022-09-11
尺寸 5mm 高 (SDoC模式可以不標示), 但所有客戶都要求要標
規定 1. logo清楚可見, 不可變型, 等比例放大縮小
2.有線產品也可以註冊FCC ID, FCC會收件; 但有文說FCC ID & FCC DoC can't be confused.
位置 本體, 外包, 手冊 (明文規定)
其他 無
USA發證, 右邊C=Canada, 左邊US=USA, 兩邊都核可, 中間為發證機構
logo底下之號碼:為合約代碼Master Contract Number (非檔案號碼,檔案號碼是舊制,目前已經改了)
由於電腦系統辨識(Y2K)問題,CSA在西元1999年改用新的電腦系統(SAP),也因此所有客戶均有一組新號碼Master Contract No. XXXXXX(6個數字),但為了方便舊客戶,仍讓舊系統的"LR XXXXX (4到6個數字)繼續沿用。所以截至目前為止,這兩組號碼都還可以做為原申請者的識別碼。
建議:如果有新開模組或新製標籤時,請儘量使用新號碼Master Contract No. XXXXXX,以避免舊號碼 (LR XXXXXX)不能使用時,模組或標籤得重新製作。
California Energy Commission
2023-06-30
尺寸 5mm
規定 只有成品有USB充電線路的才要做這個認證,電池本體不做
位置 本體標示Optional, 但外包一定要標
The requirements are that the marking be legible and permanently affixed. No specific size,
font, or color are required so long as the marking is legible.
手冊 無
2023-07-06
no logo
2023-08-09
UN 3841 PI967 Lithium ion batteries contained in equipment
尺寸 Minimum size of 100mm x 100mm (4” x 4”)
Red border around label with a minimum width of 5mm
Relevant UN identification number
Telephone number for additional information
Battery symbol
If your package is small and cannot handle a full-size lithium battery handling label, the size dimensions can be reduced to 100 mm x 70 mm (4″ x 2.75″). Otherwise, the specifications have to remain the same.
位置 外包
AI link
addtional for >100WAh
addtional for >100Wh
尺寸 100mm (4 inches) on each side
7 black vertical stripes (upper half of label)
A white background
A battery symbol
A number 9 underlined (bottom corner of label)
位置 外包
尺寸 此標示無最小之限制,最小為標示內之最小字樣清楚可見即可,
雷射標示等級 (CLASS 1 LASER/LED PRODUCT) 的部分可以按照IEC 60825-1 的方式標誌,兩者的等級分
配是相同的,雷射的警語可以跟60825-1的合併。
CLASS 1M以上等級的產品,含laser pointer 則是全部內容強制都要寫上去。
內容 LASER RADIATION DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
Maximum Output: < 1mW (實際測量值)
Wavelength (根據LED的SPEC.去填寫)
AVOID EXPOSURE – LASER RADIATION IS EMITTED FROM THIS APERTURE
位置 外包
手冊 無
規定 Annual report 美國食品藥物管理法: 廠商自行按照FDA規定每年9月報備年報(郵戳為準是FDA窗口收到報告的時間為準),核報所有的販售美國的機種與數量
大部分的FDA要求可以與60825-1合併標示,但只有
Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 這句不可以,需要外加上去。
手冊 (需要全文完整放置)
Complies with FDA performance standards for laser products except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
或 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
出處 Laser Products - Conformance with IEC 60825-1 and IEC 60601-2-22; (Laser Notice No. 50)
Document issued on: June 24, 2007
This document supersedes Laser Products – Conformance with IEC 60825-1, Am. 2 and IEC 60601-2-22; Final Guidance for Industry and FDA (Laser Notice No. 50), July 26, 2001.
What should manufacturers do in using this guidance?
Use the following modified statement of compliance on the certification label: “Complies with FDA performance standards for laser products except for deviations pursuant to Laser Notice No. 50, dated (Insert date of this guidance.)” or “Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007”; and Submit product reports or supplemental reports to describe changes to products in accordance with this guidance
出處 IEC 60825-1 要求標示內容如下 6.1:
For laser radiation levels above the AEL of Class 1, a description of any radiation pattern(s) emitted from the protective housing during the performance of operation and maintenance procedures. Where applicable, this shall include a statement in appropriate units of:
** wavelength,
** beam divergence,
** pulse duration and repetition rate (or description of irregular pulse pattern),
** maximum power or energy output.
無線Wireless
2023-05-11
出處
尺寸 2mm 高, 使用指定字型
規定 logo清楚可見, 不可變型, 等比例放大縮小
位置 本體, 除非無法標示, 才能放其他地方
使用手冊 無
外包 無
其他 無
1. 垂直放置
2. 垂直放置
3. 垂直放置
4. 水平放置
5. 水平放置
2023-07-03
Module Approval
Module Approval ANATEL: XXXX-XX-XXXX
尺寸 4mm logo, 1mm letter
規定 logo清楚可見, 不可變型, 等比例放大縮小
位置 本體, 外包, 手冊
手冊 規定文
Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados. Para maiores informações, consulte o site da ANATEL – www.anatel.gov.br
2023-06-05
CAN ICES-003(*) / NMB-003(*)
尺寸 8- point font size
規定 清楚可見, 與底色對比, 只有有顯示面板的可以允許標示在面板裡如平板手機, (A)工業等級 (B)一般級
Dongle可以標示在手冊上
位置 手冊與本體都要標示 (出文RSS-GEN)
手冊 要有英法文標示使用方式(魁北克法文),有警示的文字都要有法文翻譯
其他 產品太小不標示在本體上,去信詢問TCB詢問, 標在使用手冊與外包上替代同意信
2023-06-05
IC: XXXXXX-YYYYYYYYYYY
尺寸 8- point font size
規定 不可變型, 清楚可見, 與底色對比, do not use symbol
前六碼IC分派的公司代碼, 後11碼產品型號
位置 手冊與本體都要標示 (出文RSS-GEN)
手冊 1. 英法文標示使用方式
2. 使用的頻率與EIRP power 要標示 (原文)
3. 警語標示內容 RSS-GEN
其他 產品太小不標示在本體上, 去信詢問TCB詢問, 標在使用手冊與外包上替代同意信
其他 模組認證 Contains IC 4251A-MMORFFLUOA (模組 & 終端產品都要標示)
2023-08-10
尺寸
規定 SEC 批准證書編號(不適用於簡化測試), 不可變型, 清楚可見, 號碼是流水號, 無法預約
位置 本體
其他 生產日期(月/年)。序列號。製造國。美國證券交易委員會二維碼。
手冊 西班牙文。警語
2023-06-30
SUBTEL: N°99999/DO N° 99999/F99
SUBTEL: 9999 (有些要用訂單號碼當標示, 看客人)
Actual Sample : SUBTEL: N°11676/DO N° 58450/F60
右圖擷取證書範例
尺寸 4pt Follow FCC
規定 不可變型, 清楚可見, 號碼是流水號, 無法預約, 有些實驗室會回無線產品無標示要求
位置 本體
其他 若無法標示在產品上則去信詢問官方, 並同時說明替代的標示位置
手冊 西班牙文
2023-07-03
IFT:ZZZZZZ99-9999
尺寸 4pt Follow FCC
規定 不可變型, 清楚可見, 號碼是流水號, 無法預約
位置 本體
其他 若無法標示在產品上則去信詢問官方, 並同時說明替代的標示位置
手冊 西班牙文, 送件就要提供
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada
Producto: TECLADO INALÁMBRICO
Marca: hp
Modelo: HSA-P003K
IFT ID: RCPHPHS18-0324
HECHO en China
尺寸 右上角MR清楚可見, 大小比例須維持等比縮放
規定 右半邊為發證單位
位置 本體,
手冊 西班牙文, 消費者保護法規定如下
NOM logo
產品名稱 Producto
品牌商 Modelo
進口者 Importador
地址 dirección
電話 número de teléfono
製造地 País natal:China
網址 Sitio web (如果有的話)
額定 要用符號標示的方式,如 5V 100mA
外包 無
出處
2023-07-03
尺寸 logo的比例 7:6 字高7:2
規定 Name of the manufacturer, Brand and model number, CONATEL Logo + Certificate/Registration Numbe, 申請的時候 就要提供有標示的標籤: CONATEL will require a photo or draft of this label as part of the application package for new approval applications.
位置 本體,
手冊 無
外包 無
出處 Issued Resolucion Directorio No. 1193/2017 amending Resolutions No. 588/2009 and No. 1631/2014
NR:XXXX-XX-X-XXXX
規定字與logo高比例7:2,
但實際試過以後不可行,
維持XX部分有7寬就好,
照規定的2mm高度, 雕刻會有問題
AI link
左邊為發證單位