2023-07-08
NTRA: ETAXXX/XXXX
尺寸 NA
規定 CE & FCC logo must, ID optional
位置 本體
手冊 NA
外包 Impoter name
2023-06-30
出阿拉伯國家因國情關係
建議不要一起標示, 以免不能出貨
AI Link
尺寸 無
規定 logo清楚可見, 不可變型, 等比例放大縮小
非強制認證, 可不放logo
位置 本體, 外包, 手冊 (明文規定)
手冊 Statement
外包 NA
當核發的證書出現右邊字樣就不需標示
(依照發證官的心情)
原文
Lable in Hebrew & English with holder name, holder phone number, product model number, manufacturer name, type approval number and validity, compliance number and validity.
agent 回覆: If is no room on the product stick the label on the product manual (By mail)
必須標貼在本體上,但若有其他特殊原因不能貼時,則放在manual or 外包上進口商的資料要請客人提供,如果產品本身太小以致無法貼產品 label,可以把 label 放在使用手冊
2023-06-30
TRC/SS/20XX/999
(XX發證年份,9為序號替代)證書為流水, 取得證書才有號碼
尺寸 無規定, 建議Follow FCC規定
規定 Optional標示
位置 本體
下載 NA
2023-07-03
AI link
尺寸
規定 字的比例4:3, 邊框 10 X 18 mm
OMAN-TRA字高2mm, 其他字高1.5mm; TRA 跟 ID 比例約 4:3
外框可以不用印Outer frame is not necessary to be printed, unless the background color where the label is placed is same as the background color of the label.但底色會吃掉字的時候就要標
印不下標籤的時候申請當時就要講了 If the labeling is not practical on both equipment and its packing, it must be placed on the user guide or operating manual. However, the dealer has to prove to TRA such case at the time of type approval application.要另外申請核准信
位置 本體, 外包, 手冊 (明文規定)
下載 AI, EPS
尺寸
規定 邊框 10 X 18 mm
代碼 X = T: for Terminal, G: for mobile handset, R: for radio
代碼 NNNN = type approval number
代碼 YY = year of approva
代碼 Dealer = D refers to Dealer, nnnn: refers to dealer specific number given by TRA
下載 原文
2023-07-03
CQC
Regulation Capture
尺寸 如圖
規定 大小無限制,但須最小字清晰可見原則, 上面標題跟底下字約 3:2 比例
號碼是證書流水號, 等證書拿到才會知道, 無法先拿到
需標示在本體上,若本體很小可能會標示不清楚,則建議本體標一次後,在manual / 外包 / 彩盒上再標示一次清楚的
位置 本體, 外包, 手冊
下載 NA
手冊 阿拉伯文
出處 January 2011 Type Approval Guidelines 22. Accendix C - ictQATAR label
2023-07-24
尺寸 NA
規定 Country of Origin in “Made in Country Name” format on the product and its package.
位置 本體, 外包
下載 NA
手冊 阿拉伯文
2023-07-03
AI Link
尺寸 No character shall be less than 2mm in height.
The letters “TRA” shall be at least 3mm in height.
上面標題跟底下字約 3:2 比例, 靠左對齊
規定 證書號碼ER999是流水號, 號碼為證書號碼, 無法先拿到, 草稿可以先用999取代
當以上的標示放到使用手冊或是最小包裝上時, 所有的尺寸皆要2倍以上放大
位置 本體, 外包, 手冊
下載 NA
手冊 阿拉伯文
外包
QR code 編碼可以從網路的QR code 產生器製作, 產生完成後請 "傳遞實驗室做查驗核對動作, 2023-01-01
2023-07-10
Gulf Cooperation Council
XXXX-YYYY notify body
AI Link
國家 Bahrain, Kuwait, Oman, Qatar, Saudi Arabia, United Arab Emirates
尺寸 比例 4cm * 2.2cm 最小整體, G mark 5mm高
規定 見圖
位置 本體(可僅logo)
外包 logo+ QR Code
手冊 logo+ QR Code