H.KQ1L System

H. Appendix H. Instructions for Linking & Unlinking Repeaters on the KQ1L System

Thanks to Dave WE1U, for compiling these notes.

REMEMBER the codes work only on the repeater to link/unlink and NOT through the link.

The repeater IDs are 67, 88, 85, 82, 97, 35, etc.

1=listen to link only 2=connect to the link 3=to end the link

For example, to put Buckfied 146.880 (- / 100Hz) into the link system, the tones are 882.

1. You must be on the 88.

2. Press the PTT

3. Say "This is <callsign> sending tones <keypad 882> <callsign>"

4. Release the PTT

5. You should hear the repeater state "Transmit"

To unlink 88:

1. You must be on the 88.

2. Check to see if anyone need to use the 88 linked if you can.

3. Press the PTT

4. Say "This is <callsign> sending tones <keypad 883> <callsign>"

5. Release the PTT

6. You should hear the repeater state "OFF"