How to Safely Power up your Aircraft for a System Check

1. Make sure you complete the Receiver and Transmitter Setup

2. Make sure propeller is not installed 

3. Turn on the Transmitter

4. Plug in the battery to the ESC

5. All done! You're ready to begin your system checks.

Troubleshooting Elevons

1. Assign correct stick axis to corresponding direction control 

   • GOAL: Right stick up & down = pitch = servos move together

   • GOAL: Right Stick left & right = roll = servos move opposite

   • HOW: Reverse one of the channels (1 or 2) 

2. Assign correct roll direction 

   • GOAL: (looking from behind) Right Elevon down and Left Elevon Up = Roll Left

   • HOW: Flip flop channel 1 and 2 in the "Reverse" screen 

3. Assign correct pitch direction

   • GOAL: Right stick Stick down = Elevons up = Pitch up 

   • HOW: Flip flop the servo wires in the Receiver

4. HOLD CANCEL TO SAVE CHANGES

Reversing Motor Direction

Swap any of 2 of the 3 wires going from the ESC to the Motor.