Shark HD4 CNC for Wood

Computer Numerical Control (CNC) machining is a manufacturing process in which pre-programmed computer software dictates the movement of factory tools and machinery. The process can be used to control a range of complex machinery, from grinders and lathes to mills and CNC routers. With CNC machining, three-dimensional cutting tasks can be accomplished in a single set of prompts.

Polybox Project

V Carve 9 Design

This is the 2d technical design I created for my polybox project.

VID_20211026_140351867~2.mp4

This is a V Carve 9 simulation of the cut.

The Cut

polybox.3gp

This a video of me in the workshop vacuuming the sawdust away from the cut.

Final Product

Birthday Box

This is my product assignment. I freehanded an oval box with a lid as a jewelry box for my sister's birthday. I also have a keychain charm next to the box. This cut took 1 hour and 24 minutes. I included 2 bit changes for the wording, one to change to the V bit, one to change back to the mill bit. After the cut, I cut out the project, sanded it down, and cleaned it up.

VCarve 9 Design

This is the 2d technical drawing I constructed for my birthday box personal project.

Angela box.mp4

This video is the simulation of my box on the

V Carve 9 software.

The Cut

These videos are the actual cut done by the CNC Shark Machine. The cut is split up into three different parts because there is a tool change in between all of the videos.

Final Product

Page updated

Google Sites

Report abuse