Embedded Files
CO2 CNC Lasers work by bouncing light emissions back and forth between mirrors on an XYZ axis until the beam passes through a special lens at the tip of the router head. Types of cutting material can range from thin plywood, acrylic and cardboard.
CO2 CNC Lasers work by bouncing light emissions back and forth between mirrors on an XYZ axis until the beam passes through a special lens at the tip of the router head. Types of cutting material can range from thin plywood, acrylic and cardboard.
CO2 Laser Engraver
CO2 Laser Engraver
House Scan
House Scan
Before the Cut:
House in VCarve
House in RDWorks
The Cut
The laser first "scans" the image backwards, and then cuts the outside of it. The paper on the other side is then peeled, revealing the finished image.
After the Cut
Finished Acrylic Cut with initials
Bird Scan
Bird Scan
Before the cut
Bird in VCarve
Bird in RDWorks
The cut
Cut- cut everything except for my name which was scanned
After the cut
Finished!
Maker Box
Maker Box
Before the cut
Box model on MakerCase site
Box in RDWorks
The Cut
Laguna Laser cutting box pieces
After the cut
Assembled Box
Page updated
Google Sites
Report abuse