AMARCN VALVES

OUR SERVICE

We undertake, Servicing / Overhauling of all types of Valves during preventive maintenance, Shutdowns and Annual Maintenance Contract at your Site /Our works. We are doing servicing of all types of Industrial Valves.

Being the company with well-equipped set up and outstanding team of expert work force, the unit provides both onsite and offsite servicing activities whether the requirement is for one valve or for a complete plant. Our multi-skilled engineers who provide complete valve management Service for valves of Any Size / Age / Type / Make / Rating / MOC / Temp.

We offer the following types of Valve reconditioning services:

1) Annual rate contracts for all types of Valves Reconditioning.

2) In-Situ Valves Repairing & testing during (ATA)

3) Shut down and emergency valves maintenance.

4) Second hand plant refurbishment of valves.

You being one of the prestigious users of the various type of valve in your plant, we earnestly request our good self to enlist our name in your approved vendor list of valve, and give us an opportunity to provide best service

To be the best provider for quality service and product in the valve and valve repair industries and to deliver the product and services in the most efficient responsive and safest possible manner while meeting the customer’s respective expectation.

In House

There are time when it’s not Practical or Economical to carry out servicing of control valve on site. It requires specialist repair’s components to carry out the inspection / Overhauling / Servicing of control valve off site.

If new parts cannot be received through OEM parties, our shop can Re produce the parts for you

AMARCON VALVES IS ONE STOP VALVE SERVICING COMPANY

In Sight

Amarcon Valve Technicians are Extensively Trained Certified & Well experience. That can Perform Routine Maintenance and Emergency Servicing of valve in your Plant

Amarcon Valve Can Provide you on Site Service specialist and Portable work Shop for one single Valve servicing to a Total Shut Down, Our portable Work Shop Can also be located in your plant to perform a full range of valve repair service.

A.M.C

Annual Maintenance contract is yearly contract. We Take early contract for all type of valve Reconditioning, We are committed to customer specification through continuance improvement in our systems service and Equipment.

I/P Tranducer

SERVICES

Control Valve Repair

We undertake Servicing / Overhauling of all type of control valves. Amarcon valve is specializes in problem solving. No need to remove a control valve for repair if the valve are welded in or If you are down for an emergency shut down and the clock is running Amarcon valve can repair your control valve in line and get your plant back up and running.

General Servicing/Reconditioning/Repairing/Overhauling of Control valve

- Inspection and reporting of complete control valve
- Dis-Assembly of valve in order to get to the rote cause of problem area
- Cleaning of all parts of valve, Actuator, Body, Hand wheel, Gear assembly etc.
- Inspection of internals valve component for usual wear, Corriosion, Erosion cavitation obrasion
- Reconditioning of internals Metallising of Plug/ Seat / Seat Cage / Wedge / Body Thread / Seat by original / Equivalent Materials, if required hard facing done by Stelliting / Nitriding.
- Skin Machining of plug & Seat, lapping of plug with seat ring to achieve minimum leakage.
- Replacement of consumable Product like Gland packing / Gasket / Seal Ring etc..
- Re-Assembly of complete valve Alignment Setting / Travel Checking / Actuator bench testing panel etc…
- Testing of seat leakage / Joint leakage / gland leakage as per class II III IV V & VI leakage rate.
- Calibration of Pneumatic /Electro pneumatic Valve Positioner, I/P Transducer etc…
- Preparation and submission of test certificate.

Ball & Butterfly Valve Servicing

Amarcon Valve can repair any type any brand any size of ball valve or butterfly valve Amarcon valves regularly get in valves for repair in the 90o Range

Ball Valve & Butterfly Valve Servicing

Inspection of complete Ball valve / Butterfly valve
Dis-Assembly of valve in order to get to the rote cause of problem area
Cleaning of all parts of valve, Body, Vane, Gear assembly, Shaft, Hand wheel etc.
Replacement of consumable Product like Gland packing / Gasket / Seat Ring etc..
Re-Assembly of complete valve.
Testing of seat leakage / Joint leakage / gland leakage etc

Globe Valve & Check Valve servicing

Amarcon valve has the capability to make a repaired Globe Valves Gate Valves or Check Valves work better than it did when it was in use

Globe valve gate valve Check valve Repair

Inspection of complete Globe valve
Dis-Assembly of valve in order to get to the rote cause of problem area
Cleaning of all parts of valve, Body, Hand wheel, Stem, Gland bush & Pusher etc.
Reconditioning of internals Metallising of Plug/ Seat / Wedge / Body Thread Equivalent Materials.
Skin Machining of plug & Seat, lapping of plug with seat ring to achieve minimum leakage.
Replacement of consumable Product like Gland packing / Gasket / Seal Ring etc..
Re-Assembly of complete valve.
Testing of seat leakage / Joint leakage / gland leakage.

Actuator Servicing

Amarcon valve technician can repair any actuator.

Pneumatic diaphragm Actuator (Direct acting / Reveres Acting)
Linear piston Actuator
Quarter-Turn Actuator (Rotary Actuator)

Actuator Servicing

Inspection of complete Actuator
Dis-Assembly of Actuator in order to get to the rote cause of problem area
Cleaning of all parts of Actuator, Diaphragm plate, casing, yoke, Hand wheel, Gear assembly etc.
Reconditioning of internals Bushing of actuator.
Replacement of consumable Product like ‘O’ ring / Gasket / ‘U’ Seal Ring etc..
Re-Assembly of complete Actuator, Actuator bench testing panel etc…
Testing of Actuator leakage.
Calibration of Valve Positioner

ValvE Modification

It is often necessary to convert valve from existing type to another type. We can suggest reasons for frequent failures and suggest modifications to prevent future failures. We can also Suggest replacement valve if the current valve is beyond repair. Amarcon Valve can perform a verity of special modification to get you Just the valve you need. Amarcon has confidently undertake work modification and conversion like

Valve Modification

Change of Cv value of valve’s.
Change in flow Characteristics of Valve’s.
Change of valve action from air to open / close or vice a versa .
Change of MOC of trim set from one metal to another.
Conversion of pressure balanced trim to unbalanced trim or vice a versa.
Conversion of manual valve or electrically operated to pneumatic operated Valve .
Conversion of on-off valve to control duty valve.
Change of actuators to meet the warranted ∆P conditions.
Change in Leakage Class III / IV / V / VI /.

Page updated

Google Sites

Report abuse