Embedded Files
Globe 2 Way Control Valve
‘AMARCON’ single seated control valves consist of pressure balanced /UN balanced trims. These valves are suitable for wide range of application ranging from utilities to hazardous chemicals.
‘AMARCON’ single seated control valves consist of pressure balanced /UN balanced trims. These valves are suitable for wide range of application ranging from utilities to hazardous chemicals.
- High Rangeability
- Large Flow capacity
- Minimum seat leakage
- Wide Range of Body / Trim Materials
TECHNICAL SPECIFICATION
Body : Globe type, closed bottom, drain plug optional.
Size : 15mm to 150mm ( ½” to 6”)
End connection : Flanged, Screwed (male/female),S/W B/W.
Rating : ANSI 150 to 600# & equivalents in BS/DIN/IS.
Bonnet : Standard, extended, extended finned.
Trim forms : Plug
Top guided contoured/cascade/needle plug.
Pressure balanced cage guided contoured plug.
Multi hole cage guided plug.
Flow char’c : On-off, linear, equal %.
Seat leakage : Class III, IV, V & VI of ANSI B 16.104.
Actuator : Diaphragm & Cylinder.
Actuator type : Direct acting , Reverse acting & Double acting
Accessories : Valve Positioner, air filter, regulator, solenoid Valve, air- lock Relay, Volume booster, Limit switch etc...
MATERIALS OF CONSTRUCTION
Body& Bonnet : Cast Iron, Carbon Steel, Stainless Steel, Alloy steel, Hastelloy B/C, Monel, Inconel, etc…
Trim : SS304/306, Alloy 20, Monel, HastelloyB/C, 17-4 PH, Stellite Faced, Full Stellite.
Soft Seating : Teflon, Viton, Glass Filled Teflon, Carbon Seal Ring.
Gland Packing : Teflon, Teflon Asbestos, Grafoil, Grafoil-Asbestos
Actuator Diaphragm : Nitrile / Neoprene with Nylon Reinforcement.
The Amarcon Valve Positioner (AVP) is an instrument working on force balance Principle to Position the control Valve Stem in accordance to a Pneumatic Signal received from a controlling System, without the interface of the operating, and even actuator swing or unequal forces applied on the valve by nature. For neutralizing this a positioner will balance all the forces to operate a control valve. Valve cv sizing calculator for liquids and gases flow systems.
The Amarcon Valve Positioner (AVP) is an instrument working on force balance Principle to Position the control Valve Stem in accordance to a Pneumatic Signal received from a controlling System, without the interface of the operating, and even actuator swing or unequal forces applied on the valve by nature. For neutralizing this a positioner will balance all the forces to operate a control valve. Valve cv sizing calculator for liquids and gases flow systems.
I P Transducer
I P Transducer
Pneumatic Ball Valve
Pneumatic Butterfly Valve
V Nut Ball Valve
Page updated
Google Sites
Report abuse