BALL VALVE

Ball Valve

Ball Valve Download

Amarcon Ball Valve with pneumatic Piston actuator rack and pinion type are specially designed for on-off application. It is widely used in control of air, water, oil, gas and steam in Pharma, Textile, Chemical, power generation, paper pulp, petrochemical industries etc.

Simple construction provides ease in maintenance Without disturbing insulations and piping connections.
“O” Ring used in Piston provides good pressure seals with minimum friction.
Compact design hence reduced weight and low cost.
SNS (LH/RH) spring in spring type.

The introduction of Pre Loaded spring cartridges, That removes the danger in the case of disassemble of spring return actuator and that allows easy change of spring number present inside.

Long life over 100 thousand cycles

TECHNICAL SPECIFICATION

BODY TYPE : 2 Piece design.
VALVE SIZE : 15mm to 100mm ( ½” to 4”)
END CONNECTION : Flanged, Screwed , Socket Weld, Tri Clover End.
RATING : ANSI 150 to 300# .
BODY MATERIALS : SS 304, SS 316, CS, CI ETC .
BALL : SS 304 / SS 316

BALL SEAL RING : Grafoil / PTFE V Rings.
TRIM MATERIALS : Stainless Steel 304 / 316
CHARACTERISTICS : On / Off.
SEAT LEAKAGE : Class VI
ACTUATOR TYPE : Double Piston (Rack & Pinion).
ACTUATOR ACTION: Single Acting / Double Acting.
PINION SHAFT : EN8 / SS 304 / 316
AIR SUPPLY : 3.5 – 6 Kg/cm²
AIR CONNECTION : 1/ 4” NPT.
Accessories : Valve Positioner, air filter, regulator, solenoid Valve, air- lock Relay, Volume booster, Limit switch etc...

Pneumatic Positioner Download

The Amarcon Valve Positioner (AVP) is an instrument working on force balance Principle to Position the control Valve Stem in accordance to a Pneumatic Signal received from a controlling System, without the interface of the operating, and even actuator swing or unequal forces applied on the valve by nature. For neutralizing this a positioner will balance all the forces to operate a control valve. Valve cv sizing calculator for liquids and gases flow systems.