Project Description:
This project focused on designing and developing a Mars rover-style robotic arm capable of controlled multi-axis movement. I used a PCA servo driver board to control multiple servos, allowing the arm to perform coordinated motions with improved wiring organization and expandability. Through iterative coding, servo calibration, and mechanical testing, I refined the arm’s movement accuracy, range of motion, and overall reliability. This project strengthened my experience with embedded systems, actuator control, robotics hardware, and hands-on electromechanical integration.
Problem / Objective:
Design and develop a Mars rover-style robotic arm capable of controlled multi-axis movement for positioning, reaching, and manipulating objects through coordinated servo actuation.
Constraints:
The arm had to operate using multiple servos while maintaining stable motion, organized wiring, and sufficient control over each joint. Servo travel limits, actuator torque, mechanical interference, power demand, and communication between the controller and PCA servo driver all had to be considered.
Design Choices:
A PCA servo driver board was selected to control multiple actuators through a centralized interface while reducing the number of required microcontroller connections. The arm was divided into independently controlled joints, and each servo was assigned calibrated motion limits based on the mechanical range of the linkage.
Cost / Budget Considerations:
The design used commercially available hobby servos, standard electronic hardware, and accessible structural components to keep the prototype affordable and easy to modify. The modular control layout also allowed individual servos or mechanical components to be replaced without redesigning the entire system.
Testing / Validation Considerations:
Testing focused on servo response, joint range of motion, movement accuracy, mechanical interference, wiring reliability, and coordinated operation across multiple axes. Iterative calibration and code adjustments were used to improve repeatability and reduce sudden or unstable movements.
Documentation:
Produced robotic arm CAD and assembly concepts, servo wiring layouts, actuator assignments, calibration values, control code, and testing notes documenting movement ranges, observed issues, and design improvements.
Robotic Arm Assembly with Exploded Component View
This drawing shows the full robotic arm assembly and an exploded view of its main components, including the base, three arm links, rotational joints, gripper support, gripper joint, and clamping end effector. The arm uses multiple rotational joints to create controlled angular movement between each link, allowing the mechanism to rotate at the base, bend through the middle joints, and adjust the wrist angle near the gripper. Having three separate links increases the arm’s range of motion and gives it more flexibility when positioning the clamp, since each link contributes an additional degree of movement. The rotational wrist near the end of the arm improves the gripper’s ability to approach objects from different angles, while the clamping mechanism allows the system to grasp and hold parts during operation. Overall, the three-link design with a rotational wrist creates a more versatile robotic arm by improving reach, positioning control, and end-effector orientation.
Engineering Focus:
Multi-axis robotic arm design and coordinated servo control
Embedded systems integration using a PCA servo driver board
Servo calibration, motion sequencing, and range-of-motion refinement
Mechanical linkage design and actuator placement
Wiring organization, power distribution, and system expandability
Electromechanical testing and reliability improvement
Design Contributions:
Designed and assembled a Mars rover-style robotic arm with multiple controlled joints
Integrated a PCA servo driver board to operate multiple servos from a centralized control system
Developed and refined code for coordinated multi-axis movement and repeatable motion sequences
Calibrated servo limits to improve movement accuracy and prevent mechanical overtravel
Adjusted joint geometry, linkage positioning, and actuator placement through iterative testing
Improved wiring organization and system expandability for future sensors, joints, or end-effectors
Skills Demonstrated:
This project demonstrated skills in robotic mechanism design, embedded programming, PCA servo control, actuator calibration, motion sequencing, wiring and power integration, mechanical prototyping, troubleshooting, and electromechanical system testing.