Project Description:
This project involved developing a concept model for a rotary vision inspection system designed to inspect Little Trees fragrance cans using KEYENCE vision cameras, a servo-driven tempered glass rotary disk, compressed-air rejection, and infeed/outfeed conveyor integration. The system used one conveyor to bring cans into the inspection area and a second conveyor to carry acceptable parts out of the cell. Defective parts were rejected from the rotating disk using compressed-air blowoff points and directed into four separate defect chutes leading to collection conveyors or bins. The model included steel/iron and aluminum framework, camera mounting locations, conveyor placement, compressed-air rejection zones, and the major mechanical features needed for customer quoting. This concept was created for quoting and layout review purposes rather than as a final production design, so it focused on the key functional elements the customer needed to evaluate.
Engineering Project Flow
Problem / Objective:
Develop a high-speed automated inspection concept capable of moving fragrance cans through multiple camera inspection points while identifying defects and rejecting failed parts from the production flow.
Constraints:
The design had to account for high-speed rotary motion, camera visibility, flash timing, part spacing, conveyor integration, compressed-air rejection, machine access, guarding, and manufacturability. A major inspection constraint was the need to view the bottom of each can, which required the use of a transparent glass disk so a camera could inspect through the disk from below. Since the disk was expected to operate around 180 RPM, the system also had to maintain efficient part flow without creating bottlenecks, unstable can movement, or missed inspection windows.
Design Choices:
A rotary tempered-glass disk was selected as the main inspection platform so cameras could inspect cans from multiple angles, including from below through the transparent surface. Camera locations were staggered around the disk to reduce flash interference and improve inspection timing. The concept also included infeed and outfeed conveyors, a selected servo motor, compressed-air rejection, and multiple defect chutes for sorting failed parts away from the main production flow.
Cost / Budget Considerations:
The project was evaluated at a concept and quoting level, so the design focused on practical component selection and manufacturability rather than a finalized production budget. Commercially available components such as KEYENCE cameras, servo motor hardware, conveyors, aluminum framing, and standard machine hardware were considered where possible. Custom components were mainly used where they were needed for camera mounting, disk support, part handling, or rejection paths.
Testing / Validation Considerations:
The concept was reviewed around throughput, timing, and inspection reliability. Key considerations included camera line-of-sight, bottom-can visibility through the glass disk, flash timing, disk rotation speed, can stability, part spacing, conveyor handoff, and compressed-air rejection timing. At approximately 180 RPM, the system needed to maintain a high inspection rate while still giving each camera and rejection station enough time to function accurately.
Documentation:
Produced CAD models and layout concepts showing the rotary disk, camera positions, conveyor paths, rejection chutes, structural framing, servo motor placement, and glass disk mounting details. These models helped support quoting, internal design review, and future development of the inspection cell.
Engineering Focus:
High-speed automated inspection cell concept development
Rotary motion and throughput considerations at approximately 180 RPM
Camera placement, flash timing, and inspection visibility
Bottom-can inspection through a transparent tempered-glass disk
Conveyor integration, part spacing, and compressed-air rejection
Manufacturability, machine access, and quoting-level design documentation
Design Contributions:
Developed CAD layout concepts for the rotary inspection cell
Helped define camera placement around the glass disk for multi-angle inspection
Incorporated bottom inspection requirements by using a transparent disk design
Supported conveyor flow, rejection chute placement, and part handling layout
Modeled structural framing, disk mounting details, and inspection hardware placement
Produced design documentation to support quoting, review, and future developmen
Skills Demonstrated:
This project demonstrated skills in SolidWorks assembly design, machine vision layout, rotary mechanism design, conveyor integration, servo motor selection, compressed-air rejection, glass disk mounting, and industrial automation concept development for customer quoting.