Project Description:
Supported design modifications for an existing C4 container capping station used in a hazardous manufacturing environment. Due to the defense-related nature of the project, specific technical details are limited, but my work focused on researching explosion-proof motor options, evaluating mechanical process changes, and improving subsystem components rather than designing the full machine.
I developed concept designs for an acetone sprayer and upper capping lid mechanism, including material selection for repeated acetone exposure, fluid dispensing behavior, wear, and repairability. I also created engineering drawing prints for the designed parts and sent them to the machine shop for manufacturing review and production.
Engineering Project Flow
Problem / Objective:
Support modifications to an existing C4 container capping station by improving selected subsystems while working within hazardous-environment and defense-related project constraints.
Constraints:
Design work had to account for explosion-proof component requirements, acetone chemical compatibility, existing machine geometry, and manufacturability.
Design Choices:
Researched explosion-proof motor options for the existing system and developed concept designs for an acetone sprayer and upper capping lid mechanism. Material selection for the sprayer considered repeated acetone exposure, fluid dispensing behavior, wear, and long-term serviceability.
Manufacturing / Cost Considerations:
Focused on practical, manufacturable component concepts that could be made by a machine shop. Created engineering drawing prints for the designed parts and sent them out for manufacturing review and production consideration.
Testing / Validation Considerations:
Concepts were evaluated based on expected mechanical function, chemical resistance, alignment with the existing machine, and potential wear over repeated operation. The acetone sprayer was also considered as a repairable or replaceable wear component.
Documentation:
Produced CAD models, engineering drawings, and supporting design documentation for the proposed subsystem modifications.
Engineering Drawings:
Through developing and revising complex mechanical and assembly drawings, I gained practical experience applying GD&T, datum structures, dimensional tolerancing, fits, section views, and manufacturing callouts to clearly communicate design intent. This work strengthened my understanding of how engineering drawings connect design, manufacturing, assembly, and inspection, while also improving my ability to interpret existing drawings, manage revisions, and create documentation that supports accurate and repeatable production.
The drawings shown below are a limited selection from the full set I worked on for this project and are intentionally presented without detailed descriptions. This was done to protect the proprietary nature and design integrity of the project while still demonstrating my experience with complex engineering documentation and mechanical drawings.