TC7 - Engineering Failure Analysis

Failure causes of a bridge tie-down cables after 30 years of service

(M. Iordachescu, A. Valiente, M. De Abreu, A. Aznar)

Modeling of Elastic Properties for Unidirectional Composite Materials using Ansys Material Designer

(S. B. Rayhan, M. D. Mazedur Rahman)

Effect of Micromechanical Properties on the Buckling Behavior of a Woven Composite Plate

(S. B. Rayhan, M. D. Mazedur Rahman)

Strain measurements along a zero-strain-trajectory as possible structural health monitoring method for debonding initiation and propagation in aircraft sandwich structures

(T. Bergmayr, M. Winklberger, C. Kralovec, M. Schagerl)

Mixed mechanical-metrological approach to quantify the fractographic damage in mechanical components subjected to cyclic loading

(W. Macek, R. Owsinski, R. Branco, J. Trembacz)

Damage detection in rotating objects using position-triggered thermography

(P.J. Sousa, F. Barros, N.V. Ramos, P.J. Tavares, P.M.G.P. Moreira)

Experimental characterization and numerical simulation of nanoindentation behavior of nanocrystalline materials

(P. Bazios, K.I. Tserpes, S. Pantelakis, N. Michailidis)

High rate damage of composite material for modelling of energy absorbing structures

(A. Fedorenko, B. Fedulov, E. Lomakin)

Verification of stiffness and surface treatment of axial bearing levers by static tests

(K. Monkova, M. Urban, P. Monka)

The embankment-subsoil subjected to multidirectional seismic loading simultaneously- prediction of strain-stress mechanism

(A. Namdar)

Prediction of the settlement of a pile and assessment seismic soil-pile interaction - An analytical investigation

(A. Namdar)

The role of microstructure on damage tolerance in nano-bainitic steels

(A. Kumar, A. Singh)

Effect of matrix microstructure and second-phase particles on the damage behaviour of hot stamped martensitic steels for automotive applications

(A Milani, C. Philippot, V. Esin, F. Azzouz, E. Lucas, P. Drillet, A.-F Gourgues )

Tensile damage evolution of structural steels with different structure

(M.R. Tyutin, L.R. Botvina)

Flexible graphite as beam dumping material in the TDE blocks of LHC

(E. Solfiti, M. Calviani, A. Perillo-Marcone, J.M. Heredia, C. Torregrosa, A. Alvaro, F. Berto)

Modelling Cracks in SiC-SiC Cladding Using Peridynamics

(A.G. Bamgboye, T.A. Haynes, M. R. Wenman)

Loosening Behavior of Ripped Nuts Based on the Fastener Tightening Strategy and Plate Hardness

(B. Tanrikulu, S. Yurtdas, B. Toparli, C. Klicaslan, U. Ince)

A New Analytical Model to Estimate Maximum Internal Socket Depth of Non-reduced Strength Bolts

(F. Kocaturk, M. Burak Toparli, B. Tanrikulu, U. Ince, C. Kilicaslan)

Structural integrity of deepwater composite pipes under combined thermal and mechanical loading

(J. C. Hastie, I. A. Guz, M. Kashtalyan)

Aircraft fuselage cracking and simulation

(A. Al-Mukhtar)

Experimental study of dynamic deformation processes in gas pipelines

(I. Shardakov, O. Glot, A. Shestakov, R. Tsvetkov)

Structural integrity study of steel railway gearbox housing

(J. Serra, T. Morgado)

A method for comparing the fatigue performance of forged AZ80 Magnesium components

(A. Gryguc, S.B. Behravesh, H. Jahed, M. Wells, B. Williams, X. Su)