Experimental Mechanics

Acoustic Emission NDT for monitoring hygro-mechanical reactions of coated pine wood: a methodological approach

(C. Bertolin, L. de Ferri, J. Razavi, P. Aalto, F. Berto)

Strategies to increase the compressive strength of ultra-lightweight foamed concrete

(D. Falliano, L. Restuccia, G.A. Ferro, E. Gugliandolo)

Experimental approach for the study of wood strength at fracture in mode II by using a modified prototype test specimen and confrontation of the results with those of the 4ENF test. Application: Eucalyptus Grandis

(A. Saoud, A. Elamri, K. Kimakh)

Assessment of lightweight concrete properties under cryogenic temperatures

(F. Stochino, M. Valdes, F. Mistretta, M. Sassu)

Assessment of mode I stress intensity factor of SENT specimens based on Digital Image Correlation method (DIC): Case of ABS material

(R. Rhanim, M. Lahlou, F: Majid, Z. Najat, H. Rhanim, I. Mrani)

The role of the testing rate on Small Punch tests for the estimation of fracture toughness in hydrogen embrittlement

(B. Arroyo, J.A. Álvarez, F. Gutiérrez-Solana, R. Lacalle, S. Cicero)

Application of the incremental step loading technique to Small Punch Tests on S420 steel in acid environments

(B. Arroyo, L. Andrea, P. Gonzales, J.A. Alvarez, S. Cicero, R. Lacalle, A. Fernandez)

Improvement of Staircases Vibration Serviceability to Human Ergonomics: A Case Study

(P. Andrade, J. Santos, L. Maia)

Monitoring the mechanical response of early aged cement-mortar specimen using the Pressure Stimulated Current technique

(D. Triantis, I. Stavrakas, A. Kyriazopoulos, E.D. Pasiou, S.K. Kourkoulis)

An alternative analytic approach to the stress field in a flattened Brasilian disc

(Ch. F. Markides, S.K. Kourkoulis)

Formulation of Ordinary Concrete using the Dreux-Gorisse Method

(H. Chbani, B. Saadouki, M. Boudlal, M. Barakat)

On Buckling and Fracture of Thin Elastic Plastic Foils

(P. Stale, M. Shahmardani, s. Kao-Walter)

Dispersing carbon nanomaterials facilitating aqueous air nanobubble solutions for use in cement based materials

(Z.S. Metaxa, E.P. Favvas, A.C. Mitropoulos)

Partial replacement of cement by waste marble slurry

(E. Christodoulou, Z.S. Metaxa, O. Theochardidis, A. Ekmektis, A.C: Mitropoulos)

Electromechanical contact element for modelling failure due to long range interactions in electric circuit interfaces

(C. Maruccio, A. Kefal)

Parameter identification strategy for online detection of faults in smart structures

(C. Maruccio, P. Montegiglio, A. Kefal)

Experiment and modelling of the fatigue fracture of high-strenght FeMnSi-based Shape Memory Alloy

(M. Evard, F. Belyaev, A. Volkov)