F -OPERATION

■ STARTING THE ENGINE

Open the fuel shutoff valve.

Wait 1 minute to let the flow

of fuel into the carburettor.

Move the choke lever(4) to the closed

position.

Set the engine switch(a) to the " I " position.

Set the throttle lever to the start position (1-

2-3).

Place the unit on a flat, firm place. Keep the

cutting head clear of everything around it.

While holding the unit firmly, pull out the

starter rope quickly.

After the engine has started, open the

choke guradually and allow the engine to

warm up. Pull the throttle lever to unlock it.

■ STOPPING THE ENGINE

1. Release the throttle lever.

2. Move the engine switch to the "O" position.

■ ADJUSTMENTS

• Throttle cable: The normal play is 1 or 2 mm

when measured at the carburetor side end.

Readjust with the cable adjuster(1) as required.

• Engine idling speed: It is normal that the

engine keeps running without the blade

rotation, when the throttle lever is released.

When the engine speed is too high or too

slow, readjust the idle set screw (2).