C -ASSEMBLY

■ ENGINE

• Using attached 4 socket screws, secure the

connection firmly with equal force.

■ HANDLE

Slip the right-side handlebar into the throttle grip. Locate the throttle grip so that the stopper bolt can pass through the stopper hole.

Securely tighten the stopper bolt and nut.

(1) Loosen the two bolts of the lower cap and remove the lower cap.

(2) Position the handle bracket against the handle label located on the outer tube.

(3) Attach the lower cap with the two bolts and tighten the bolts. Make sure the front handle is in position per the illustration.

(4) Secure the cable to the outer pipe

with the two bands as the illustration shows. The two bands are in the tool bag.

■ BLADE GUARD

• Attach the guard

to the clamp on

the outer pipe just

touching the

gearcase. Fix it

with bolts.