Post date: Mar 23, 2015 4:57:23 AM
Di bawah ini adalah sistem yang diperlukan (hardware dan software) untuk menjalankan Autodesk Inventor 2015 (versi Windows).
Catatan
Sesuaikan versi Autodesk Inventor dengan sistem operasi yang digunakan. File instalasi Inventor tersedia dalam versi untuk sistem operasi 32-bit dan 64-bit. Versi 64-bit tidak bisa dipasang di sistem 32-bit, begitu juga sebaliknya.
1. Sistem yang diperlukan untuk Autodesk Inventor 2015 (Windows)
Operating System
Recommended:
64-bit Microsoft® Windows® 7 (SP1), Windows 8 or Windows 8.1 ¹ ²
Minimum:
32-bit Microsoft Windows 7 (SP1) ¹ ²
CPU Type
Recommended:
Intel® Xeon® E3 or Core i7 or equivalent, 3.0 GHz or greater ³
Minimum:
Intel® Pentium® 4 or AMD Athlon™ 64, 3 GHz or faster or Intel® or AMD dual core 2 GHz or faster ³
Memory
Recommended:
12 GB RAM ⁴
Minimum:
8 GB RAM for less than 500 part assemblies⁴
Disk Space
Recommended:
250 GB free disk space or more
Minimum:
100 GB free disk space
Graphics
Recommended:
Microsoft® Direct3D 11® or capable graphics card or higher ⁵
Minimum:
Microsoft® Direct3D 10® capable graphics card or higher ⁵
Other
DVD-ROM ⁶
1,280 x 1,024 or higher screen resolution
Internet connection for Autodesk® 360 functionality, web downloads, and Subscription Aware access
Adobe® Flash® Player 10 ⁷
Microsoft® Mouse-compliant pointing device
Microsoft® Internet Explorer® 8 or higher
Microsoft® Excel (fully installed desktop application) 2007, 2010, 2013 for iFeatures, iParts, iAssemblies, thread customization, and spreadsheet-driven designs. Office Online is not supported for use with Autodesk Inventor.
Microsoft .NET Framework 4.5 SP1 ⁸
2. Sistem yang diperlukan untuk model yang lebih kompleks, model berupa rakitan mold yang kompleks, dan rakitan yang melibatkan banyak komponen (lebih dari 1000 komponen)
Operating System
Recommended:
64-bit Microsoft® Windows® 7 (SP1), Windows 8 or Windows 8.1 ¹ ²
CPU Type
Recommended:
Intel® Xeon® E3 or Core i7 or equivalent, 3.30 GHz or greater ³
Memory
Recommended:
16 GB RAM or greater ⁴
Graphics
Recommended:
Microsoft® Direct3D 11® or capable graphics card or higher ⁵
Other
DVD-ROM ⁶
1,280 x 1,024 or higher screen resolution
Internet connection for Autodesk® 360 functionality, web downloads, and Subscription Aware access
Adobe® Flash® Player 10 ⁷
Microsoft® Mouse-compliant pointing device
Microsoft® Internet Explorer® 8 or higher
Microsoft® Excel (fully installed desktop application) 2007, 2010, 2013 for iFeatures, iParts, iAssemblies, thread customization, and spreadsheet-driven designs. Office Online is not supported for use with Autodesk Inventor.
Microsoft .NET Framework 4.5 SP1 ⁸
Notes
Autodesk® Inventor® 2015 software application is provided both as 32-bit applications and as 64-bit applications for installation and use on the corresponding operating system only. Autodesk® Vault Explorer 2015 is a 32-bit application for installation and use on either a 32-bit or 64-bit operating system.
Autodesk Inventor and Autodesk Vault must both be the same language on a given computer. English versions of these applications will run on any language operating system. Other language versions of these applications will run on operating systems of that same language.
Autodesk Inventor LT 2015 is optimized to take advantage of the SSE2 extended instruction sets supported on Pentium 4, AMD Athlon 64, and AMD Opteron processors. Inventor LT 2015 will not install on computers that do not support SSE2. Several utilities are available on the Internet that report CPUID including supported instructions sets.
Autodesk recommends settings which allow Microsoft Windows to manage virtual memory as needed. There should always be at least twice as much free hard disk space as system memory (RAM).
Please refer to the Autodesk published graphics card information.
Autodesk Inventor LT 2015 is available only on DVD (or electronic download in some situations). DVD-ROM drive is not required if installing using software download methods.
The multimedia learning components of the Inventor Help system, such as the UI Video Tour, Command Reference, and Show Me animations, require Adobe Flash Player 10. If it is not already installed, you can download it from the Adobe website.
Provided by the Autodesk product installer.
Windows XP® Professional 32-bit is not recommended for Autodesk® Inventor LT™ or Autodesk® Inventor