PUBLICATIONS IN JOURNALS:

1. Vikesh Kumar, N.K. Kumbhar, M.D. Joshi, Y. Ma, I. Singh, and S.S. Hosmani*, “Microstructural and Electrochemical Behaviour of Severely Surface Deformed 316L Steel Manufactured by Conventional and Selective Laser Melting Routes”, Materials Science and Technology, Accepted (2024). DOI: 10.1177/02670836241245811 

2. Vikesh Kumar, C.I. Pruncu, Y. Wang, F.G. Echeverrigaray, F. Alvarez, B.L. Perotti, C.A. Figueroa, and S.S. Hosmani*, “The Response of 316L Steel Manufactured by Selective Laser Melting Route to High-Temperature Oxidation Behaviour: The Role of Microstructure Modification”, Materials Characterization, Vol. 207, January 2024, Manuscript No. 113531, Pages 1 to 22 (2024). DOI: 10.1016/j.matchar.2023.113531 

3. Nilesh K. Kumbhar, Vikesh Kumar, and S.S. Hosmani*, “Influence of Surface Mechanical Attrition Treatment Parameters on Microstructure and Residual Stress of Mg5Zn0.2Ca Alloy”, Journal of Materials Engineering and Performance, Accepted (2023). DOI: 10.1007/s11665-023-08714-7

4. Nilesh K. Kumbhar, Vikesh Kumar, D. Singh, and S.S. Hosmani*, “Gradient Microstructure and Properties of Surface Mechanical Attrition Treated AZ91D Alloy: An Effect of Colliding Balls Velocity”, Advanced Engineering Materials, 27 July 2023, Manuscript No. 2300549, Pages 1 to 23 (2023). DOI: 10.1002/adem.202300549  

5. Vikesh Kumar, C.I. Pruncu, Y. Wang, C.A. Figueroa, I. Singh, and S.S. Hosmani*, “The Role of Microstructure Modifications on Electrochemical and Plasma-nitriding Behaviour of 316L Steel Produced by Laser Powder Bed Fusion”, Philosophical Magazine, Vol. 103, No. 20, Pages 1855–1896 (2023). DOI: 10.1080/14786435.2023.2241019 

6. Nilesh K. Kumbhar, Manoj D. Joshi, Vikesh Kumar, and S.S. Hosmani*, “An Impact of the Recent Developments in Coating Materials and Techniques on the Corrosion Response of AZ91D Alloy: A Review”, Advanced Engineering Materials, 21 January 2023, Manuscript No. 202201680, Pages 1 to 27 (2023). DOI: 10.1002/adem.202201680 

7. M.D. Joshi, N.K. Kumbhar, O.V. Rambadey, P.R. Sagdeo, R. S. Devan, and S.S. Hosmani*, “Exfoliated Nano-hBN Additives for Enhancing Tribological Performance of ATSP Coatings Deposited on AISI 316L Steel: Role of SMAT Pre-Treatment”, Surface and Coatings Technology, Vol. 447, 15 October 2022, Manuscript No. 128829, Pages 128829-1 to 128829-16 (2022). DOI: 10.1016/j.surfcoat.2022.128829 

8. Vikesh Kumar, A. Sharma, S.S. Hosmani, and I. Singh*, “Effect of Ball Size and Impact Velocity on the Microstructure and Hardness of Surface Mechanical Attrition Treated 304L Steel: Experiment and Finite Element Simulations”, The International Journal of Advanced Manufacturing Technology, Vol. 120, 03 March 2022, Pages 3251–3267 (2022). DOI: 10.1007/s00170-022-08978-8 

9. D. Singh, F. Cemin, M.J.M. Jimenez, V. Antunes, F. Alvarez, D. Orlov, C.A. Figueroa, and S.S. Hosmani*, “High-Temperature Oxidation Behaviour of Nanostructure Surface Layered Austenitic Stainless Steel”, Applied Surface Science, Vol. 581, 15 April 2022, Pages 152437-1 to 152437-20 (2022). DOI: 10.1016/j.apsusc.2022.152437

10. M.D. Joshi*, R.A. Patil, Y. Ma, R.S. Devan, and S.S. Hosmani, “Reciprocating Wear Behaviour of Non-Coated and Polymer/Composite Coated AISI 316L Steel: Role of Surface Mechanical Attrition Treatment”, Tribology Transactions, Vol. 64, No. 5, Pages 916-935 (2021). DOI: 10.1080/10402004.2021.1950884

11. D. Singh*, D.A. Basha, L. Wadsö, D. Orlov, Y. Matsushita, A. Singh, and S.S. Hosmani, “Evolution of Gradient Structured Layer on AZ91D Magnesium Alloy and Its Corrosion Behaviour”, Journal of Alloys and Compounds, Vol. 882, 15 November 2021, Pages 160659-1 to 160659-14 (2021). DOI: 10.1016/j.jallcom.2021.160659 

12. Vikesh Kumar, M.D. Joshi, C. Pruncu, I. Singh, and S.S. Hosmani*, “Microstructure and Tribological Response of Selective Laser Melted AISI 316L Stainless Steel: The Role of Severe Surface Deformation”, Journal of Materials Engineering and Performance, Vol. 30, No. 7, Pages 5170-5183  (2021). DOI: 10.1007/s11665-021-05730-3

13. M.D. Joshi, Vikesh Kumar, and S.S. Hosmani*, “Analysis of Surface Mechanical Attrition Treated AISI 316L Steel: Variation in Nanomechanical Response within the Treated Layer,” Materials Today: Proceedings, Vol. 47, Issue P16, Pages 5542-5551 (2021). DOI: 10.1016/j.matpr.2021.03.397 (Scopus Indexed Journal) 

14. A.K. Litoria, M. D. Joshi, V. Antunes, D. Singh, C. A. Figueroa, F. Alvarez, and  S.S. Hosmani*, “The Response of Boronized 34CrAlMo5-10 (EN41B) Steel to Nanoindentaion, Oxidation, and Wear”, Philosophical Magazine, Vol. 101, No. 7, Pages 777-818 (2021). DOI: 10.1080/14786435.2020.1866221 

15. M.D. Joshi*, Vikesh Kumar, Indrasen Singh, and S.S. Hosmani, “Tribological Response of Mechanical Attrition Treated Surface of AISI 316L Steel: The Role of Velocity of Colliding Balls,” Journal of Tribology, Vol. 143, March 2021, Pages 031701-1 to 031701-15 (2021). DOI: 10.1115/1.4047950

16. D. Singh*, D.A. Basha, A. Singh, R.S. Devan, and S.S. Hosmani, “Microstructural and Passivation Response of Severely Deformed AISI 304 Steel Surface: The Role of Surface Mechanical Attrition Treatment,” Journal of Materials Engineering and Performance,  Vol. 29, No. 10, October 2020, Pages 6898 to 6911 (2020). DOI: 10.1007/s11665-020-05161-6

17. S.S. Mani Prabu*, C.S. Perugu, A. Jangde, H.C. Madhu, M. Manikandan, M. D. Joshi, S. S. Hosmani, P. Ajay Kumar, S.V. Kailas, and I. A. Palani, “Investigations on the influence of surface mechanical attrition treatment on the corrosion behaviour of friction stir welded NiTi shape memory alloy,” Surface and Coatings Technology, Vol. 402, November 2020, Manuscript N0. 126495, Pages 126495-1 to 126495-11 (2020). DOI: 10.1016/j.surfcoat.2020.126495

18. A.K. Litoria, C.A. Figueroa, L.T. Bim, C.I. Pruncu, A.A. Joshi, and S.S. Hosmani*, “Pack-boriding of Low Alloy Steel: Microstructure Evolution and Migration Behavior of Alloying Elements”, Philosophical Magazine, Vol. 100, No. 3, Pages 353-378 (2020). DOI: 10.1080/14786435.2019.1680890

19. M.D. Joshi, Vikesh Kumar, Aditya K. Litoria, Digvijay Singh, and S.S. Hosmani*, “Effect of Surface Mechanical Attrition Treatment on Tribological Behavior of AISI 2205 Steel,” Materials Today: Proceedings, Vol. 33, Part 8, Pages 4919-4926 (2020). DOI: 10.1016/j.matpr.2020.02.487 (Scopus Indexed Journal)

20. D. Singh, A.M. Gatey, R.S. Devan, V. Antunes, F. Alvarez, C.A. Figueroa, A.A. Joshi, and S.S. Hosmani*, “Surface Treatment Response of AISI 2205 and AISI 304L Steels: SMAT and Plasma-Nitriding”, Surface Engineering, Vol. 35, No. 3, Pages 205-2015 (2019). DOI: 10.1080/02670844.2018.1516372

21. A.K. Litoria, A.A. Joshi, M.D. Joshi, G. Dixit, D. Singh, and S.S. Hosmani*, “Wear Behaviour of Boronized and Duplex-Treated AISI 4140 Steel Against DLC-Coated Boronized AISI 4140 Disc”, Surface Engineering, Vol. 35, No. 4, Pages 370-377 (2019). DOI: 10.1080/02670844.2018.1512198

22. A. Sharma, S.S. Mani Prabu, I.A. Palani*, S.S. Hosmani, R. Patil, “Formability studies on Ni-Ti shape memory alloy using laser forming technology,” IOP Conf. Series: Materials Science and Engineering, Vol. 390, Article No. 012053, Pages 1-6 (2018). DOI: 10.1088/1757-899X/390/1/012053 (Scopus Indexed Journal)

23. K.M. Mane and S.S. Hosmani*, “Friction Stir Surface Processing of Al 6061 Alloy: Role of Surface Alloying with Copper and Heat-Treatment”, Transactions of the Indian Institute of Metals, Vol. 71, No. 6, Pages 1411-1425 (2018). DOI: 10.1007/s12666-018-1277-0 

24. A.A. Joshi, R.P. Singh, and S.S. Hosmani*, “Microstructure Evolution in Boronized Inconel 718 Superalloy”, Journal of Metallurgy and Materials Science, Vol. 59, No. 1, Pages 11-21 (2017). Indian Journal - Print ISSN: 0972-4257, Online ISSN: 0974-1267, Published by CSIR-National Metallurgical Laboratory (NML), Jamshedpur, India

25. A.M. Gatey*, S.S. Hosmani, C.A. Figueroa, S.B. Arya, R.P. Singh, “Role of Surface Mechanical Attrition Treatment and Chemical Etching on Plasma Nitriding Behavior of AISI 304L Steel”, Surface and Coatings Technology, Vol. 304, Pages 413-424 (2016). DOI: 10.1016/j.surfcoat.2016.07.020 

26. A.M. Gatey*, S.S. Hosmani, S.B. Arya, C.A. Figueroa, R.P. Singh, “Plasma-Nitriding of AISI 2205 steel: Effects of Surface-Mechanical-Attrition-Treatment and Chemical-Etching”, Surface Engineering, Vol. 32, Issue 1, Pages 61-68 (2016). DOI: 10.1080/02670844.2015.1112937  

27. A.M. Gatey, S.S. Hosmani* and R.P. Singh, “Surface Mechanical Attrition Treated AISI-304L Steel: Role of Process-Parameters”, Surface Engineering, Vol. 32, Issue 1, Pages 69-78 (2016). DOI: 10.1179/1743294415Y.0000000056  

28. A.A. Joshi, S.S. Hosmani*, J. Dumbre, “Tribological Performance of Boronized, Nitrided and Normalized AISI 4140 Steel Against Hydrogenated Diamond-like Carbon (DLC) Coated AISI D2 Steel”, Tribology Transactions, Vol. 58, Pages 500-510 (2015). DOI: 10.1080/10402004.2014.988377

29. A.A. Joshi, S.S. Hosmani*, “Pack-boronizing of AISI 4140 Steel: Boronizing Mechanism and the Role of Container Design”, Materials and Manufacturing Processes, Vol. 29, Issue 9, Pages 1062-1072 (2014). DOI: 10.1080/10426914.2014.921705

30. S. Meka*, E. Bischoff, S.S. Hosmani and E.J. Mittemeijer, “Interrelationships of Defects, Nitride Modification and Excess Nitrogen in Nitrided Fe-4.75 at. % Al Alloy”, International Journal of Materials Research (former Zeitschrift für Metallkunde), Vol. 105, Pages 1-10 (2014). DOI: 10.3139/146.111127

31. S.S. Hosmani*, V. Ajesh, “Effect of Duplex Surface Treatment on the Microstructure and Properties of Mild Steel,” Proceedings of the Indian National Science Academy, Vol. 79, No. 3, Pages 327-331 (2013). Indian Journal - ISSN 0370-0046

32. A.M. Gatey*, S.S. Hosmani, R.K.P. Singh and S. Suwas, “Surface Engineering of Stainless Steels: Role of Surface Mechanical Attrition Treatment (SMAT),” Advanced Materials Research, Vol. 794, Pages 238-247 (2013). DOI: 10.4028/www.scientific.net/AMR.794.238

33. S.S. Hosmani*, “Concepts in Surface Alloying of Metals,” Metallurgical & Materials Engineering (former Journal Metalurgija), Vol. 19, No. 1, Pages 65-84 (2013). UDC: 669.14.018.8:667.613 (Published by AMES - Association of Metallurgical Engineers of Serbia)

34. V. Kumar and S.S. Hosmani*, “The Effect of Temperature and Cooling-Rate on Pack-Carburized Iron,” Journal of Metallurgy and Materials Science, Vol. 53, No. 4, Pages 393-404 (2011). Indian Journal - Print ISSN: 0972-4257, Online ISSN: 0974-1267, Published by CSIR-National Metallurgical Laboratory (NML), Jamshedpur, India

35. A.R. Clauss, E. Bischoff, S.S. Hosmani, R.E. Schacherl* and E.J. Mittemeijer, “Crystal Structure and Morphology of Mixed Cr1–xAlxN Nitride Precipitates: Gaseous Nitriding of a Fe-1.5 Wt Pct Cr-1.5 Wt Pct Al Alloy”, Metallurgical and Materials Transactions A, Vol. 40, No. 8, Pages 1923-1934 (2009). DOI: 10.1007/s11661-009-9865-6

36. S.S. Hosmani, R.E. Schacherl* and E.J. Mittemeijer, “Morphology and constitution of the compound layer formed on nitrided Fe-4wt.%V alloy”, Journal of Materials Science, Vol. 44, Pages 520-527 (2009). DOI: 10.1007/s10853-008-3090-3

37. S.S. Hosmani, R.E. Schacherl*, L. Lityńska-Dobrzyńska, and E.J. Mittemeijer, “The nitrogen–absorption isotherm for Fe-21.5at.%Cr alloy: uptake of excess nitrogen in dependence on the precipitation morphology”, Philosophical Magazine, Vol. 88, No. 16, Pages 2411-2426 (2008). DOI: 10.1080/14786430802345660

38. S. Meka, S.S. Hosmani, A.R. Clauss and E.J. Mittemeijer*, “The emergence and disappearance of a high density of microcracks in nitrided Fe-4.65 at.% Al alloy”, International Journal of Materials Research (former Zeitschrift für Metallkunde), Vol. 99, Issue 7, Pages 808-814 (2008). DOI: 10.3139/146.101703

39. N.E. Vives Díaz, S.S. Hosmani, R.E. Schacherl* and E.J. Mittemeijer, “Nitride precipitation and coarsening in Fe-2.23 at.% V alloys; XRD and (HR)TEM study of coherent and incoherent diffraction effects caused by misfitting nitride precipitates in a ferrite matrix”, Acta Materialia, Vol. 56, Issue 16, Pages 4137-4149 (2008). DOI: 10.1016/j.actamat.2008.04.041

40. S.S. Hosmani, R.E. Schacherl* and E.J. Mittemeijer, “Compound-layer formation on iron-based alloys upon nitriding; phase constitution and pore formation,” HTM Härtereitechnische Mitteilungen: Zeitschrift fuer Werkstoffe - Waermebehandlung - Fertigung, Vol. 63, Issue 3, Pages 139-146 (2008). DOI: 10.3139/105.100456

41. S.S. Hosmani*, R.E. Schacherl, and E.J. Mittemeijer, “Nitrogen absorption by Fe-1.04 at. % Cr alloy: uptake of excess nitrogen”, Journal of Materials Science, Vol. 43, No. 8, Pages 2618-2624 (2008).  DOI: 10.1007/s10853-008-2473-9

42. S.S. Hosmani*, R.E. Schacherl, and E.J. Mittemeijer, “Kinetics of Nitriding Fe-2 Wt Pct V Alloy: Mobile and Immobile Excess Nitrogen”, Metallurgical and Materials Transactions A, Vol. 38, No. 1, Pages 7-16 (2007). DOI: 10.1007/s11661-006-9046-9

43. S.S. Hosmani*, R.E. Schacherl, and E.J. Mittemeijer, “Microstructure of the “white layer” formed on nitrided Fe-7 wt.% Cr alloys”, International Journal of Materials Research (former Zeitschrift für Metallkunde), Vol. 97, Issue 11, Pages 1545-1549 (2006). DOI: 10.3139/146.101419.

44. S.S. Hosmani*, R.E. Schacherl, and E.J. Mittemeijer, “Nitrogen uptake by an Fe-V alloy: Quantitative analysis of excess nitrogen,” Acta Materialia, Vol. 54, Issue 10, Pages 2783-2792 (2006). DOI: 10.1016/j.actamat.2006.02.017

45. S.S. Hosmani*, R.E. Schacherl, and E.J. Mittemeijer, “Nitriding behavior of Fe-4wt%V and Fe-2wt%V alloys”, Acta Materialia, Vol. 53, Issue 7, Pages 2069-2079 (2005). DOI: 10.1016/j.actamat.2005.01.019

46. S.S. Hosmani*, R.E. Schacherl, and E.J. Mittemeijer, “The kinetics of the nitriding of Fe-7Cr alloys; the role of the nitriding potential”, Materials Science and Technology, Vol. 21, No. 1, Pages 113-124 (2005). DOI: 10.1179/174328405X16289

PUBLICATIONS IN CONFERENCE PROCEEDINGS:

1. A.M. Gatey, S.S. Hosmani* and R.K.P. Singh, “Corrosion Behavior of Stainless Steels: Role of Surface Mechanical Attrition Treatment”, Proceedings of International Corrosion Prevention Symposium (CORSYM-2014), Indian Institute of Technology (IIT), Bombay, India, February 20-21, 2014; Chair: Prof. V.S. Raja: Pages 278-286 (2014).

2. S.S. Hosmani*, R.V. Potdar and T.B. Chaudhari, “Production and Study of Cast-Iron Dispersed Steel Matrix Materials”, Proceedings of Second International Conference on Advances in Materials Processing and Characterisation (AMPC 2013), Chennai, India, February 6-8, 2013; Editors: S. Balasivanandha Prabhu, S. Senthil Kumaran, L. Karunamoorthy; K.A. Padmanabhan; Publisher: Allied Publishers Pvt. Ltd., New Delhi, Vol. I of II, Pages 256-260 (2013).

BOOKS / MONOGRAPHS:

1. S.S. Hosmani, P. Kuppusami, R.K. Goyal: “An Introduction to Surface Alloying of Metals”, Series: SpringerBrief in Manufacturing Processes and Surface Engineering, Publisher: Springer, Published on: May 31, 2014. (ISBN: 978-81-322-1888-3, ISSN: 2191-530X, DOI: 10.1007/978-81-322-1889-0) (Click: http://www.springer.com/978-81-322-1888-3 )

BOOK CHAPTERS:

1. G. Gupta, S.S. Hosmani, S. Sarkar: “Pack Carburizing”, Chapter No. 45, Pages 643-651, Encyclopedia of Iron, Steel and Their Alloys; Editors: Rafael Colás and George Totten, Publisher: CRC Press  (Taylor & Francis Group), Published online on: March 30, 2016. (For Book Chapter – DOI: 10.1081/E-EISA-120049527) (For Entire Book – ISBN: 9781466511040 - CAT# K14814)

OTHER PUBLICATIONS / REPORTS:

1. S.S. Hosmani. Nitriding of Iron-based Alloys; the Role of Excess Nitrogen. Ph.D. thesis, Max-Planck-Institute for Metals Research, Stuttgart and Universität Stuttgart, Germany, Report Number 187, 2006. (Thesis available online at following link: http://dx.doi.org/10.18419/opus-6618 ).

2. S.S. Hosmani. Gaseous Nitriding of Iron-Chromium Alloys. M.Tech. thesis, Indian Institute of Technology, Bombay, India, 2003.

3. S.S. Hosmani. Development of Ultra High Strength Steel. M.Tech. I stage project report, Indian Institute of Technology, Bombay, India, 2002.

4. S.S. Hosmani. Quality Evaluation of Centrifugally Spun Cast-Iron Pipes. B.E. thesis, V. National Institute of Technology (formerly, VRCE), Nagpur, India, 2001.