Nilesh Kumbhar, Shubham Parihar, S.S. Hosmani, Akiko Yamamoto, “Biocompatibility Behaviour of Surface Mechanical Attrition Treated Mg5Zn0.2Ca Magnesium Alloy,” Oral Presentation (Presenting author: Nilesh Kumbhar) at the 16th Biometal Symposium, held in Krakow, Poland: August 25-30, 2024.
Shubham Parihar, Vikesh Kumar, Rupesh S. Devan, S.S. Hosmani, “Development of Fe-based composite materials motivated by Delhi iron pillar’s structure,” Poster Presentation (Presenting author: Shubham Parihar) at 6th Bharatiya Vigyan Sammelan (BVS) and Expo, jointly organized by Vijnana Bharati, Government of Gujarat at Ahmedabad, India: December 21-24, 2023.
Keynote Lecture on “Surface Processing of Metallic Materials: The Recent Trends to Control Material Loss”, 2nd International Conference on Innovations in Mechanical and Civil Engineering (i-MACE 2023), Organized by Pimpri Chinchwad College of Engineering, Pune, India. (August 19, 2023).
Invited lecture on “Surface Engineering of Alloys” at the half-day workshop organized by the Dept. of Metallurgical and Materials Engineering & Indian Institute of Metals (Jaipur Chapter), Malaviya National Institute of Technology Jaipur: June 26, 2023.
Invited Talk on “Surface Engineering of Steels: Microstructure and Properties”, International Conference on Frontiers in Materials Engineering (ICFME-2022), Organized by Dept. MEMS, Indian Institute of Technology Indore, India. (December 14, 2022).
Nilesh K. Kumbhar, Rohan Jain, Vikesh Kumar, Manoj D. Joshi, S.S. Hosmani, “Thermal Stability of Surface Mechanical Attrition Treated AISI 316L Stainless Steel,” Oral Presentation (Presenting author: Manoj D. Joshi) at 4th Structural Integrity Conference and Exhibition (SICE 2022), Organized by Indian Structural Integrity Society, held at IIT Hyderabad, India: December 14-16, 2022.
Vikesh Kumar, Sahil Kumar, Manoj D. Joshi, Nilesh Kumbhar, S.S. Hosmani. “Microstructural and Corrosion Behaviour of Conventional and Selective Laser Melted AISI 316L Stainless Steel: Role of Severe Surface Deformation,” Oral Presentation (Presenting author: Vikesh Kumar (Invited Talk)) at 4th Structural Integrity Conference and Exhibition (SICE 2022), Organized by Indian Structural Integrity Society, held at IIT Hyderabad, India: December 14-16, 2022.
Keynote Lecture on “Effect of Severe Surface Deformation on Plasma-Nitriding and Oxidation Behaviour of Austenitic Stainless Steel”, Session on Advances in Heat Treatment, International Conference & Exhibition on Materials, Engineering, Technology and Advances in Heat Treatment, Organized by ASM International, India Chapter, Mumbai. (November 3, 2022).
Vikesh Kumar, Harsh Rajiv, Nilesh Kumbhar, Manoj D. Joshi, and S.S. Hosmani. “Experimental and Computational Investigation of AZ91D Mg Alloy Processed by Severe Surface Deformation,” Oral Presentation (Presenting author: Vikesh Kumar) at International Conference & Exhibition on Materials, Engineering, Technology and Advances in Heat Treatment, Organized by ASM International, India Chapter, Mumbai, India: November 02-04, 2022.
Sahil Kumar, Pushpalata Priyadarshi, Vikesh Kumar, Nilesh Kumbhar, and S.S. Hosmani. “Boronizing of Ti6Al4V Alloy: Microstructure and Tribology,” Oral Presentation (Presenting author: Sahil Kumar) at International Conference & Exhibition on Materials, Engineering, Technology and Advances in Heat Treatment, Organized by ASM International, India Chapter, Mumbai, India: November 02-04, 2022.
Keynote Lecture on “Surface Engineering of Stainless Steel: Severe Surface Deformation & Surface Alloying”, Plenary Session – V, 5th International Conference on “Advances in Steel, Power and Construction Technology” (ICASPCT), Organized by OP Jindal University, Raigarh (CG), India. (June 17, 2022).
Resource Person for Online Lecture on “Boronizing of Steels” organized by ASM International India Chapter, India. (April 03, 2021). [Lecture link: https://www.youtube.com/watch?v=oHWEnevTgy0 ]
Resource Person for Online 5 Days Short Term Course (STC) on Advances in Materials Manufacturing Processes and Properties, Malaviya National Institute of Technology, Jaipur, India. (July 10, 2020).
Resource Person for National Seminar on Frontiers in Materials, National Institute of Technology - Karnataka, Surathkal, Mangalore. (30th October 2019).
Manoj D. Joshi, Vikesh Kumar, Aditya K. Litoria, Digvijay Singh, and S.S. Hosmani. "Effect of Surface Mechanical Attrition Treatment on Tribological Behavior of AISI 2205 Steel,” Oral Presentation (Presenting author: Manoj D. Joshi) at International Conference on Processing and Characterization of Materials (ICPCM-2019) at NIT Rourkela, India: December 12-14, 2019.
Resource Person for Short-term Program in "Advances in Nanoscience and Nanotechnology", A.S. Mandals, Arts & Commerce College Trust’s Shaikshnik Sankul, Talod, Nandurbar, 22nd - 27th December 2017.
A. Joshi, V. Pawar, S.S. Hosmani, R. Singh. “Investigation of Shrink-fitted Carburized Gear Deformation in Service”, Poster Presentation (Presenting author: A. Joshi) at 55th National Metallurgists’ Day (NMD) – 71st Annual Technical Meeting (ATM), Indian Institute of Metals (IIM), Organized at BITS-Pilani, Goa, India: 11-14 November 2017.
Resource Person for Two Days Workshop on “Materials Processing and Degradation”, Title of talk: “Forging & Surface Processing of Automotive Components”, Organized by Department of Metallurgical & Materials Engineering, National Institute of Technology – Karnataka (NIT-K), Surathkal, Mangalore, India: 17–18 October 2016.
Invited Talk on “Surface Alloying Heat-Treatment of Iron-based Alloys”, Presentation at 12th HTS 2016 – International Conference on ‘Advanced Heat Processing’, Organized by ASM International (India Chapter) at Mumbai: 12–14 October 2016.
S.S. Hosmani. One of the Resource Persons for Two Days Workshop on “Principles and Practices of Failure Analysis”, Title of talk: “Types of Failure & Stress”, Organized by Kalyani Centre For Technology & Innovation (KCTI), Bharat Forge Ltd., Pune, India: 24–25 June, 2016.
S.S. Hosmani. One of the Resource Persons for One Day Workshop on “FEST 2015 – Forum for Engineering Students on Technologies of Tomorrow: Part 1 - Materials for Off-Highway Vehicles”, Organized by SAE Off-highway Board, John Deere India Pvt. Ltd. and College of Engineering, Pune (CoEP), India: 18 September 2015.
S.S. Hosmani, P. Wakadkar, P. Katti and S. Shaikh. “Effect of Surface Mechanical Attrition Treatment on 6061-T6 Aluminum alloy”, Poster Presentation (Presenting author: S. Shaikh) at 52nd National Metallurgists’ Day (NMD) – 68th Annual Technical Meeting (ATM), Indian Institute of Metals (IIM), Organized at COE-Pune, India: 12-15 November 2014. (Awarded 1st prize)
A. Garje, A. Gatey and S.S. Hosmani. “Surface Engineering of 4330V and AISI 1020 steels: Role of Surface Mechanical Attrition Treatment (SMAT) and Nitriding Response”, Poster Presentation (Presenting author: A. Garje) at 52nd National Metallurgists’ Day (NMD) – 68th Annual Technical Meeting (ATM), Indian Institute of Metals (IIM), Organized at COE-Pune, India: 12-15 November 2014.
N.S. Meshram, S. Gahlyan, A. Gatey and S.S. Hosmani. “Surface Modification of AISI 304 steel; The role of Surface Mechanical Attrition Treatment Process Parameters”, Oral Presentation (Presenting author: N.S. Meshram) at 52nd National Metallurgists’ Day (NMD) – 68th Annual Technical Meeting (ATM), Indian Institute of Metals (IIM), Organized at COE-Pune, India: 12-15 November 2014.
K. Mane, N. Shah, S. Mulik, A. Deshpande and S.S. Hosmani. “Friction Stir Surface Alloying of Al 1200 Alloy”, Oral Presentation (Presenting author: N. Shah) at 52nd National Metallurgists’ Day (NMD) – 68th Annual Technical Meeting (ATM), Indian Institute of Metals (IIM), Organized at COE-Pune, India: 12-15 November 2014.
S.S. Hosmani. “Surface Mechanical Attrition Treatment (SMAT) of steels”, Presentation at UGC NRC-M Symposium and Discussion meeting on ‘Severe Plastic Deformation and Bulk Nano-structured Materials’, Organized by Indian Institute of Science (IISc), Bangalore: 12–14 May 2014. (Invited Talk)
S.S. Hosmani. One of the Resource Persons for Three Days Workshop on “Heat Treatments and Microstructures of Steels (HTMS)”, Organized by Kalyani Centre For Technology & Innovation (KCTI), Bharat Forge Ltd., Pune, India: 3–5 May 2014 and 12-14 May, 2015.
A.M. Gatey, S.S. Hosmani, R.K.P. Singh and S. Suwas. “Surface Engineering of Stainless Steels: Role of Surface Mechanical Attrition Treatment (SMAT)”, Oral Presentation (Presenting author: A.M. Gatey) at Stainless Steel Centenary Symposium (SSCS 2013), Victor Menezes Convention Centre, Indian Institute of Technology (IIT), Bombay, India: 12-14 August 2013.
S.S. Hosmani. Resource person for expert-lecture on “Surface Engineering of Iron-based Alloys”, AICTE sponsored Faculty Development Programme (FDP) on Recent Trends in Manufacturing Technology, Organized by Department of Mechanical Engineering, Walchand College of Engineering, Sangli, Maharashtra, India: 18 June 2013.
S.M. Badjate, A.S. Pakhare, S.S. Hosmani. “The Application of Equal Channel Angular Pressing (ECAP) in Powder Metallurgy and Recycling of Automotive Metal Waste”, Oral Presentation (Presenting author: S.M. Badjate) at PM-13 International Conference and Exhibition on Powder Metallurgy for Automotive and Engineering Industries-Precision and Additive Manufacturing And 39th Annual Technical Meeting, Organized by Powder Metallurgy Association of India (PMAI) at Pune, India: 7-9 February 2013.
S.S. Hosmani, R.V. Potdar and T.B. Chaudhari. “Production and Study of Cast-Iron Dispersed Steel Matrix Materials”, Oral Presentation (Presenting author: S.S. Hosmani) at Second International Conference on Advances in Materials Processing and Characterisation (AMPC 2013), Chennai, India: 6-8 February 2013.
K. Gokhale, S.S. Hosmani. “Surface Alloying of 4330V Steel: the Influence of Type of Processing on Microstructure and Properties”, Poster Presentation (Presenting author: K. Gokhale) at The 3rd Asian Symposium on Materials & Processing (ASMP)-2012, organized by Indian Institute of Technology, Madras and Division of Materials & Processing, Japan Society of Mechanical Engineers at IIT-Madras, Chennai, India: 30-31 August 2012. (Best Poster Award)
Resource person for an expert lecture on “Metals: Steels & Cast-Iron”, Organized by Department of Production Engineering, D.Y. Patil College of Engineering, Akurdi, Pune, India: 12 April 2012.
S.S. Hosmani. “Effect Of Duplex Surface Treatments On The Microstructure & Properties Of Plain Carbon Steel”, Presented at the National Conference on Recent Advances in Materials and Technology (NCRAMAT-2012), organized by Satyabama University (with the support from CSIR) at Chennai, India: 6-7 January 2012. (Special Talk)
Resource person for lecture series on “Materials Science & Engineering”, Organized by YORK Transport Equipment Pvt. Ltd, Pune, India: 19 June 2011.
S.S. Hosmani, Vinay Kumar, Udaya Bhat K. “Thermochemical Heat Treatment of Pure Iron: Microstructure & Kinetics”, Oral Presentation (Presenting author: S.S. Hosmani) at 48th National Metallurgists’ Day (NMD) – 64th Annual Technical Meeting (ATM), Indian Institute of Metals (IIM), Organized at Indian Institute of Science (IISc), Bangalore, India: 16 November 2010.
S.S. Hosmani. “Microstructure and Kinetics of Surface Alloyed Iron-based Alloys”, Presentation at the meeting on the Future Directions of the Science of Microstructure, organized by Indian Institute of Science (IISc), Bangalore (sponsored by Indian Academy of Science) at Orange County, Coorg, Karnataka, India: 21–24 February 2010. (Invited Talk)
S.S. Hosmani, R.E. Schacherl and E.J. Mittemeijer. “Surface Hardening of Iron-based Alloys using Thermochemical Heat-Treatment”, Oral Presentation (Presenting author: S.S. Hosmani) at 47th National Metallurgists’ Day (NMD) – 63rd Annual Technical Meeting (ATM), Indian Institute of Metals (IIM), Organized at Kolkata, India: 17 November 2009. (Awarded 3rd prize)
S.S. Hosmani. “Surface Hardening of Steels: Thermochemical Heat Treatment”, Resource person for MHRD sponsored Summer school on “Surface Engineering”, N.I.T.K., Surathkal, India, 13 – 18 July 2009.
S.S. Hosmani. “Surface Hardening of Steels: Non-chemical Heat Treatment”, Resource person for MHRD sponsored Summer school on “Surface Engineering”, N.I.T.K., Surathkal, India, 13 – 18 July 2009.
S.S. Hosmani. “Surface Hardening Process of Iron-based Alloys”, Presentation at IIM – Surathkal Chapter, Department of Metallurgical & Materials Engineering, National Institute of Technology – Karnataka, Surathkal, India: 11 February 2009.
S.S. Hosmani. “Surface Engineering of Iron-based Alloys: Nitriding and Carburising”, Presentation at IIM – Kalpakkam Chapter & Metallurgy Colloquium, Indira Gandhi Center for Atomic Research (IGCAR), Kalpakkam, India: 19 December 2008.
S.S. Hosmani, N. Vives Díaz, R.E. Schacherl and E.J. Mittemeijer. “The nitriding of Fe-based alloys: formation of alloying element nitrides in compound layer and diffusion zone; role of the nitriding potential”, Oral Presentation (Presenting author: S.S. Hosmani) at 2nd Bodycote / AGA In-depth Surface Engineering Seminar on Carburising, carbonitriding, nitriding, nitrocarburising and safety, Stenungsund, Sweden: 23 May 2007. (Invited Talk)
N. Vives Díaz, S.S. Hosmani, L. Zagonel, R.E. Schacherl and E.J. Mittemeijer. “Residual Stresses of Nitrided Fe-Cr and Fe-V Alloys”, Oral Presentation (Presenting author: N. Vives Díaz) at International Max Planck Research School for Advanced Materials, Stuttgart, Germany: Evaluation talk, 03 November 2005.
R.E. Schacherl, S.S. Hosmani, N. Vives Díaz and E.J. Mittemeijer. “Nitrieren von Fe-V Legierungen (Nitriding of Fe-V Alloys)”, Oral Presentation (Presenting author: R.E. Schacherl) at AWT (Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechni) - Fachausschuss Nitrieren (Nitriding Board of AWT), Breman, Germany: 2 March 2005.