d. NAZA and remzibiOSD

Well , looks like user "pawelsky" did some reverse engineering and unscrambled communication protocol from NAZA GPS .

He described all on RCG http://www.rcgroups.com/forums/showthread.php?t=1995704 , good work "pawelsky"

Looks like I must finish firmware for OSD receiving data from NAZA directly .

.............

Below is temporary added firmware for OSD to work with NAZA's GPS, I have not NAZA device so firmware was wrote in "theory" based on Pawelsky work.

Here is the firmware ver 1_59, speed should be fixed and improved, home arrow should be fixed, some code cosmetics.

If anyone can check it with NAZA GPS and report results at remzibi11@poczta.onet.pl .

Already got REPORT , so recommend to use those firmware, in next version will made proper date and time.

Connection : TX from NAZA's GPS to RX in OSD board, GND must be also connected.

If at first line you encounter any strange characters then use default BIN file from this side a. OSD board and firmware

THIS FILE can be used as base for custom layout modifications.

Practical way, how to made connection without cutting original NAZA cable is described HERE