1.1
1.2
2.1
Flaw tools can do 4 reading to confirm quality:
1-Count Edge pixels,
2-Count pixels within range of intensity,
3-Sum all intensity values,
4-Sum all edge energy values
One Point Locator tool: can reposition a tool ROI in the field of view FOV
Rect Warp tool: to create a new image buffer and minimize confusionby programmer on top of zoom in and flip image
3.1
3.2
4.1
5.1
5.2
5.3
6.1
6.2
6.3
6.4
- Telnet to the camera on the 49211 port. This is the difficult step as you would need to first get the camera onto
the same subnet as the PC. Eventually you want to get the camera to 192.168.188.2, 255.255.0.0, which is the
default IP and subnet. Maybe do that first.
- At the 49211 port, issue the “jobdelete –all” command. I’ve found when first opening the 49211 port that you
need to hit enter at least once to set the communication buffer into a good state.
- Reboot the camera. You could cycle power or issue the “reboot” command.
At this point, the camera should be just about at the “default” state.