This page contains resources related to Kawasaki 16bit ECUs...
Development work on the ZX12R Flash tool would not have been possible without the initial discovery work and support of Iron Pony. Many thanks!!!If you're looking to test whether your ZX12R 16bit ECU can be reflashed via OBD, check out the "K1-K3 GSX_R 600-750 K-Line test v1.2b.doc" in the "OBD (bootloader)" section. If you're interested in using the Flash Tool, you should first build the adaptor and try reading your ECU. Then if everything goes well, you can decide if you want to get a flash/erase license. All the OBD software on this site was designed for a KKL VAG-COM USB OBD cable equipped with a CH340 chipset. Cables that use the FTDI chipset are not recommended and may not work.
The Yoshbox and Teka SFI both use an analog interface to adjust the FI fuel trim and save these values to the ECU's non-volatile ram (NV ram). Flash tool version 4.2 will now allow you to read the 512 bytes of NV Ram data directly from the ECU...
Here's a list of the ECUs we've dumped with the Flash tool so far:
21175-1065-0470 21175-1073-0590 21175-1080-0890 21175-1091-131021175-1069-0510 21175-1077-0860 21175-1087-129021175-1069-0511