Publications

Google Scholar     Scopus    Web of Science    Research Gate     ScholarGPS     AD Scientific Index    Sci Profiles   Scilit

PEER-REVIEWED JOURNAL ARTICLES  

2025

• David K. Orisekeh, Giancarlo Corti, M. P. Jahan, Enhancing thermo-mechanical properties of additively manufactured PLA using eggshell microparticle fillers, Journal of Manufacturing Processes, 133, 782-797, 2025. https://doi.org/10.1016/j.jmapro.2024.11.095 

• Nabin Bastola, Jianfeng Ma, M. P. Jahan, Enhancing Mechanical and Energy Absorption Properties of Additively Manufactured Polyamide Lattice Structures through Hybrid-Structuring and Strut-Reinforcement – A Numerical and Experimental Study, The International Journal of Advanced Manufacturing Technology, 136, 2397-2426, 2025.  https://doi.org/10.1007/s00170-024-14907-8   

• Adjei-Yeboah, J.; Jahan, M.P. Study of Corner and Shape Accuracies in Wire Electro-Discharge Machining of Fin and Gear Profiles and Taper Cutting. Micromachines 2025, 16, 547. https://doi.org/10.3390/mi16050547 

2024

• N Bastola, J Ma, MP Jahan, Design and numerical investigation of the 3D reinforced re-entrant auxetic and hexagonal lattice structures for energy absorption properties, Manufacturing Letters 41, 1100-1108, 2024, https://doi.org/10.1016/j.mfglet.2024.09.135

• SM Alimuzzaman, J Ma, MP Jahan, Numerical investigation on machining of additively manufactured CFRP composite with different build orientations and layer widths Manufacturing Letters 41, 679-690, 2024, https://doi.org/10.1016/j.mfglet.2024.09.086 

• MP Jahan, A Niraula, MA Nafi, A Perveen, Multi-Scale Traditional and Non-Traditional Machining of Bulk Metallic Glasses (BMGs)—Review of Challenges, Recent Advances, and Future Directions Micromachines 15 (6), 686, 2024, https://doi.org/10.3390/mi15060686

• Amin Razeghiyadaki; Carlo Molardi; Didier Talamona; M. P. Jahan; Asma Perveen, A numerical investigation on material removal mechanism of electro discharge machining of non-conductive ceramics, International Journal on Interactive Design and Manufacturing, 18, 6493–6501, 2024. https://doi.org/10.1007/s12008-023-01237-4  

2023

• Sk Md Alimuzzaman, M. P. Jahan, C. S. Rakurty, Nithin Rangasamy, Jianfeng Ma, Cutting Fluids in Metal AM: A Review of Sustainability and Efficiency, Journal of Manufacturing Processes, 106, 51-87, 2023. https://doi.org/10.1016/j.jmapro.2023.09.075 

• Charles K. Ma, Lesly Aguilar, Mahmud Karim‡, Muhammad Abdun Nafi, Jianfeng Ma, M. P. Jahan, Experimental Investigation of Nanosecond Laser Machining of 3D Printed Carbon Fiber Reinforced Polymer (CFRP) Composite, Manufacturing Letters, 35, 399 – 409, 2023. https://doi.org/10.1016/j.mfglet.2023.08.077 

• Muhammad Abdun Nafi, Mahmud Anjir Karim, Shashi Lalvani, Paul F. James, Andrew Sommers, M. P. Jahan§, Investigating Wettability and Corrosion Resistance of the Titanium Alloy Surface Engineered by the WEDM Process, Manufacturing Letters, 35, 450 – 459, 2023. https://doi.org/10.1016/j.mfglet.2023.08.100 

• N Bastola, MP Jahan, N Rangasamy, CS Rakurty, A Review of the Residual Stress Generation in Metal Additive Manufacturing: Analysis of Cause, Measurement, Effects, and Prevention, Micromachines 14 (7), 1480, 2023, https://doi.org/10.3390/mi14071480  

• Muhammad Abdun Nafi, M.P. Jahan, Functional Surface Generation by EDM - A review, Micromachines 14 (1), 115, 2023. https://doi.org/10.3390/mi14010115

• M A. Rahman, T. Saleh, M. P. Jahan, C. McGarry, A. Chaudhari, R. Huang, M. Tauhiduzzaman, A. Ahmed, A. A. Mahmud, M. S. Bhuiyan, M. F. Khan, M. S. Alam, M. S. Shakur, Review of Intelligence for Additive and Subtractive Manufacturing: Current Status and Future Prospects, Micromachines 14 (3), 508, 2023. https://doi.org/10.3390/mi14030508 

2022

• Goralka, C.; Bridges, J.; Jahan, M.; Sidebottom, M.; Cameron, T.; Lu, Y.; Ye, Z. Friction and Wear Reduction of Tungsten Carbide and Titanium Alloy Contacts via Graphene Nanolubricant. Lubricants 2022, 10, 272. https://doi.org/10.3390/lubricants10100272  

• Mahmudul Hassan, Jianfeng Ma, M. P. Jahan, Numerical modeling and simulation of machining of 3D printed CFRP composite, Manufacturing Letters, 33, 415-427, 2022. https://doi.org/10.1016/j.mfglet.2022.07.055 

• Md Rashef Mahbub, Landon Kovach, Amy Wolfe, Shashi Lalvani, Paul F. James, Muhammad P. Jahan, Enhancing cell adhesion and corrosion performance of titanium alloy by surface and sub-surface engineering using WEDM, Surface and Coatings Technology, 429, 127929, 2022. https://doi.org/10.1016/j.surfcoat.2021.127929 

2021

• Asif Rashid, Asma Perveen, M, P. Jahan, Understanding Novel Assisted Electrode from a Theoretical and Experimental Perspectives for EDM of Aluminum Nitride Ceramics, The International Journal of Advanced Manufacturing Technology, 116(9), 2959-2973, 2021. https://doi.org/10.1007/s00170-021-07660-9 

• Roan M. Kirwin, James C. Moller, M. P. Jahan, Modification and adaptation of wire lag model based on surface feed for improving accuracy in wire EDM of Ti-6Al-4V alloy, The International Journal of Advanced Manufacturing Technology, 117, 2909–2920, 2021. https://doi.org/10.1007/s00170-021-07870-1 

• Roan M. Kirwin, M. P. Jahan, Understanding effects of non-electrical parameters on the profile accuracies, surface roughness, and sub-surface microstructure during wire-EDM of titanium alloy, Machining Science and Technology, 25(6), 1031-1052, 2021. https://doi.org/10.1080/10910344.2021.1971714 

• N. Cococcetta, M. P. Jahan, J. Schoop, J. Ma, D. Pearl, M. Hassan, Post-processing of 3D printed thermoplastic CFRP composites using cryogenic machining, Journal of Manufacturing Processes, 68 (2021) 332–346. https://doi.org/10.1016/j.jmapro.2021.05.054

• Bilal, A.; Perveen, A.; Talamona, D.; Jahan, M.P. Understanding Material Removal Mechanism and Effects of Machining Parameters during EDM of Zirconia-Toughened Alumina Ceramic. Micromachines 2021, 12, 67. https://doi.org/10.3390/mi12010067 

• Asma Perveen, M.P. Jahan, Experimental and statistical investigation into micro-EDM of Hastelloy-X using PVD diamond coated and AlTiN coated tungsten carbide electrodes, International Journal of Manufacturing Research, Vol. 16, No. 1, pp. 52-81, 2021. DOI: 10.1504/IJMR.2021.10028782   

2020

• S. Kannan, S. Pervaiz, M.P. Jahan, D.S. Venkatraghaven, Cryogenic Drilling of AZ31 Magnesium Syntactic Foams, Materials, 2020, 13, 4094. doi: 10.3390/ma13184094

• N.M. Cococcetta, D. Pearl, M.P. Jahan, J. Ma, Investigating surface finish, burr formation, and tool wear during machining of 3D printed carbon fiber reinforced polymer composite, Journal of Manufacturing Processes, Volume 56, Part B, Pages 1304-1316, 2020. https://doi.org/10.1016/j.jmapro.2020.04.025 

• David Adeniji, Julius Schoop, Shehan Gunawardena, Craig Hanson, Muhammad Jahan, Characterization and modeling of surface roughness and burr formation in slot milling of polycarbonate, Journal of Manufacturing and Materials Processing, 2020, 4(2), 59. https://doi.org/10.3390/jmmp4020059 

• Nick H. Duong, Jianfeng Ma, Muhammad P. Jahan, Shuting Lei, Murali Sundaram, Numerical Investigation of Effect of Operating Parameters on the Phase Transformation during Vibration Assisted Nano Impact Machining of Silicon by Loose Abrasives, ASME Journal of Micro- and Nano- Manufacturing, 8(1): 014501 (6 pages), 2020.  https://doi.org/10.1115/1.4045762 

• M.P. Jahan, Jianfeng Ma, Craig Hanson, Xingbang Chen, G.K. Arbuckle, Experimental and Numerical Investigation of Cutting Forces in Micro-milling of Polycarbonate Glass, Machining Science and Technology, Volume 24, Issue 3, pp. 366 - 397, 2020. https://doi.org/10.1080/10910344.2019.1698608 

• Ashutosh Khatri, Muhammad P. Jahan, Investigating the microstructure and morphology of chips in dry, flood coolant and MQL machining of Ti-6Al-4V alloy, International Journal of Sustainable Manufacturing, Vol. 4, Nos. 2/3/4, 234 - 250, 2020. https://doi.org/10.1504/IJSM.2020.107136 

• M.P. Jahan, Jianfeng Ma, Craig Hanson, G.K. Arbuckle, Tool wear and resulting surface finish during micro slot-milling of polycarbonates using uncoated and coated carbide tools, Journal of Engineering Manufacture, 234(1-2), 52-65, 2020. https://doi.org/10.1177/09544054198624

2019

• Ashutosh Khatri, Muhammd P. Jahan, Jianfeng Ma, Assessment of tool wear and microstructural alteration of the cutting tools in conventional and sustainable slot milling of Ti-6Al-4V alloy, International Journal of Advanced Manufacturing Technology, 105(7–8), 2799–2814, 2019. https://doi.org/10.1007/s00170-019-04520-5 

• M.P. Jahan, F. Alavi, A Study on the Surface Composition and Migration of Materials and their Effect on Surface Microhardness During Micro-EDM of Ti-6Al-4V, Journal of Materials Engineering and Performance, 28(6), 3517-3530, 2019. https://doi.org/10.1007/s11665-019-04120-0 

• Megan Shockly, Nick Duong, Jianfeng Ma, Shuting Lei, Muhammad P. Jahan, and Murali Sundaram, Numerical Investigation of the Effects of Operating Parameters in the Vibration Assisted Nano Impact Machining of Single Crystalline Silicon by Loose Abrasive using Molecular Dynamics Simulation, Journal of Manufacturing Processes, Volume 43, Part B, Pages 12-19, 2019. https://doi.org/10.1016/j.jmapro.2019.03.044 

• Asif Rashid, Azat Bilal, Chong Liu, M. P. Jahan, Didier Talamona, Asma Perveen, Effect of Conductive Coatings on Micro-Electro-Discharge Machinability of Aluminum Nitride Ceramic Using On-machine-fabricated Micro-electrodes, Materials, 12, 3316, 2019. doi: 10.3390/ma12203316 

• N. Duong, V. K. Kore, J. Ma, S. Lei, M. P. Jahan, M. Sundaram, Damage Evolution in Vibration Assisted Nano Impact Machining by Loose Abrasives at Elevated Temperatures: A Numerical Study, Journal of Manufacturing Processes, 47, 357-366, 2019. https://doi.org/10.1016/j.jmapro.2019.09.034 

• Nurbol Sabyrov, M. P. Jahan, Azat Bilal, and Asma Perveen, Ultrasonic Vibration Assisted Electro-Discharge Machining (EDM) - An Overview, Materials 12, 522, 2019. DOI: 10.3390/ma12030522 

• Muhammad P. Jahan, Asma Perveen, Ann M. Rumsey, A Review on the Conventional, Non-conventional, and Hybrid Micromachining of Glass, Machining Science and Technology, Vol. 3, No. 2, pp. 264 - 338, 2019. https://doi.org/10.1080/10910344.2019.1575411 

• Azat Bilal, M.P. Jahan, Didier Talamona, and Asma Perveen, Electro-discharge machining of Ceramics: A Review, Micromachines 2019, 10(1),10. doi: 10.3390/mi10010010 

2018

• Soundaram J. Ananthakrishnan, Swapnil Share, Jacob Strain, Manda Venkataramana, Muhammad Jahan and Hemali Rathnayake, Precise control in photovoltaic response of Poly(3-hexylthiophene): Fullerene solar cells via accelerated-solvent vapor annealing, Sci. Adv. Today 4 (2018) 25279.

• M.P. Jahan, Farshid Alavi, Roan Kirwin, Rashef Mahbub, Micro-EDM induced surface modification of titanium alloy for biocompatibility, International Journal of Machining and Machinability of Materials, Vol. 20, No. 3, pp. 274 - 298, 2018. DOI:10.1504/IJMMM.2018.093548 

• Asma Perveen, M.P. Jahan, Application of Box Behnken design to model crater size generated during micro-EDM of Ni-X alloy, International Journal of Mechanical Engineering and Robotics Research Vol. 7, No. 3, pp. 229 - 234, 2018. DOI:10.18178/ijmerr.7.3.229-234 

• M.P. Jahan, G.K. Arbuckle, A.M. Rumsey, A Comparative Study on the Effectiveness of TiN, TiCN, and AlTiN Coated Carbide Tools for Dry Micro Milling of Aluminum, Copper and Brass at Low Spindle Speed, International Journal of Machining and Machinability of Materials,  Vol. 20, No. 2, pp. 141 - 164, 2018. DOI:10.1504/IJMMM.2018.090544 

2017

• Farshid Alavi, M.P. Jahan, Optimization of Process Parameters in Micro-EDM of Ti-6Al-4V Based on Full Factorial Design, International Journal of Advanced Manufacturing Technology, 92(1), 167-187, 2017. https://doi.org/10.1007/s00170-017-0103-x 

2016

• Mark Doggett, M.P. Jahan, Perceptions of Advanced Manufacturing Competency Model (AMCM) for Curriculum Development, The Technology Interface International Journal (TIIJ), Volume 17, Number 1, pp. 90 - 98, 2016. https://tiij.org/issues/issues/fall2016/X__TIIJ%20fall%202016%20v17%20n1%20(PDW-2).pdf#page=92 

2015

• Mychal-Drew Moses, M.P. Jahan, Micro-EDM Machinability of Difficult-to-cut Ti-6Al-4V against Soft Brass, International Journal of Advanced Manufacturing Technology, 2015, Volume 81, Issue 5, 1345-1361. https://doi.org/10.1007/s00170-015-7306-9 

• M.P. Jahan, Gregory K. Arbuckle, Dawood Abdulhameed, A Comparative Study on the Effectiveness of Coated and Uncoated Tungsten Carbide Tools for Dry Machining of Ti-6Al-4V, The International Journal of Engineering Research and Innovation, 2015, 7(2), 53-60. http://ijeri.org/IJERI-Archives/issues/fall2015/abstracts/Y__IJERI%20fall%202015%20v7%20n2%20(Paper%206).pdf 

• Dawood Abdulhameed, Gregory K. Arbuckle,  M.P. Jahan, A comparative study on the machinability of titanium alloy (Ti-6Al-4V) using conventional flood coolant and dry machining, International Journal of Machining and Machinability of Materials, 2015, Volume 17, Issue 6, pp. 507-528. DOI:10.1504/IJMMM.2015.073721 

• Venkata Ramana Manda, Stephen Guffey, John Ferguson, Muhammad P. Jahan, Hemali Rathnayake; Enhancing device performance of P3HT/PDIB donor-acceptor system using spray-coating fabrication, ScienceJet, 2015, 4: 153 Cognizure.

• M.P. Jahan, Gregory K. Arbuckle, Dawood Abdulhameed, A Comparative Study on the Micromachining Performance of Copper, Brass and Aluminium, The International Journal of Engineering Research and Innovation, 2015, 7(1), 23-31. http://ijeri.org/IJERI-Archives/issues/spring2015/abstracts/Y__IJERI%20spring%202015%20v7%20n1%20(Paper%203).pdf 

• M.P. Jahan, Pegah Kakavand, E.L.M. Kwang, M. Rahman, Y.S. Wong; An experimental investigation into the micro-electro-discharge machining behaviour of aluminium alloy (AA 2024), The International Journal of Advanced Manufacturing Technology, 2015, 78, 1127–1139.  https://doi.org/10.1007/s00170-014-6712-8 

2014

• Lan Xu, Venkata Ramana Manda, Louis McNamara, Muhammad P. Jahan, Hemali Rathnayake and Nathan I Hammer, Covalent Synthesis of Perylenediimide-Bridged Silsesquioxane Nanostructures and Their Electronic Propeties, RSC Advances, 2014, 4 (57), 30172 - 30179. https://doi.org/10.1039/C4RA03260H 

2012

• M.P. Jahan, A.P Malshe and K.P. Rajurkar, Experimental Investigation and Characterization of Nano-scale Dry Electro-machining, Journal of Manufacturing Processes, Volume 14, Issue 4, October 2012, Pages 443–451. https://doi.org/10.1016/j.jmapro.2012.08.004 

• Wenyang Zhang, Dmytro Demydov, M.P. Jahan, Kuldeep Mistry, Ali Erdemir, Ajay P. Malshe, Fundamental Understanding of the Tribological and Thermal Behavior of Ag-MoS2 Nanoparticle-based Multi-component Lubricating System, Wear, Volume 288, 30 May 2012, Pages 9–16. https://doi.org/10.1016/j.wear.2012.03.003 

• M.P. Jahan, T.W. Liang, Y.S. Wong and M. Rahman, In-situ machining of complex shaped and arrays of micro-electrodes using reverse micro-EDM, International Journal of Mechatronics and Manufacturing Systems, 2012, Vol.5, No.5/6, pp.495 - 515. DOI:10.1504/IJMMS.2012.049975 

• M.P. Jahan, Y.S. Wong and M. Rahman, Evaluation of the effectiveness of low frequency workpiece vibration in deep-hole micro-EDM drilling of tungsten carbide, Journal of Manufacturing Processes, Volume 14, Issue 3, August 2012, Pages 343–359. https://doi.org/10.1016/j.jmapro.2012.07.001 

• M.P. Jahan, M. Rahman, Y.S. Wong, Experimental Investigations into the Influence of Major Operating Parameters During Micro-Electro-Discharge Drilling of Cemented Carbide, Machining Science and Technology Volume 16, Issue 1,  pp. 131-156, 2012. https://doi.org/10.1080/10910344.2012.648575 

• Asma Perveen, M.P. Jahan, M. Rahman, Y.S. Wong; A study on microgrinding of brittle and difficult-to-cut glasses using on-machine fabricated poly crystalline diamond (PCD) tool, Journal of Materials Processing Technology, Volume 212, Issue 3, Pages 580–593, 2012. https://doi.org/10.1016/j.jmatprotec.2011.05.021 

• M.P. Jahan, M. Rahman, Y.S. Wong, Study of the diffusion of carbon, its sources and effect on finishing micro-EDM performance of cemented carbide, Journal of Materials Engineering and Performance,  Volume 21, Issue 8, pp. 1655–1668, 2012. https://doi.org/10.1007/s11665-011-0083-1 

2011

• M.P. Jahan, M. Rahman, Y.S. Wong, A review on the conventional and micro electrodischarge machining of tungsten carbide,  International Journal of Machine Tools and Manufacture, Volume 51, Issue 12, Pages 837-858, 2011. https://doi.org/10.1016/j.ijmachtools.2011.08.016 

• M.P. Jahan, T.W. Lieh, Y.S. Wong and M. Rahman, An experimental investigation into the electro-discharge machining behavior of p-type silicon, International Journal of Advanced Manufacturing Technology, Volume 57, Numbers 5-8, pp. 617-637, 2011. https://doi.org/10.1007/s00170-011-3302-x 

• M.P. Jahan, M. Rahman, Y.S. Wong,  Study on the nano-powder mixed sinking and milling micro-EDM of WC-Co, International Journal of Advanced Manufacturing Technology, Volume 53, Numbers 1-4, 167-180, 2011. https://doi.org/10.1007/s00170-010-2826-9 

2010

• M.P. Jahan, T. Saleh, M. Rahman, Y.S. Wong, Development, modeling and experimental investigation of low frequency workpiece vibration assisted micro-EDM of tungsten carbide, Transaction of ASME: Journal of Manufacturing Science and Engineering, 132, 041001 (2010) (9 pages). https://doi.org/10.1115/1.4002457 

• M.P. Jahan, M. Rahman, Y.S. Wong, Modeling and experimental investigation on the effect of nanopowder mixed dielectrics in fine-finish micro-EDM of tungsten carbide, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Volume 224, Number 11 / 2010. https://doi.org/10.1243/09544054JEM1878 

• M.P. Jahan, M. Rahman, Y.S. Wong, L. Fuhua, On-machine fabrication of high-aspect-ratio microelectrodes and application in vibration-assisted micro-EDM drilling of tungsten carbide, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. Volume 224, Number 5, 2010. https://doi.org/10.1243/09544054JEM1718 

• M.P. Jahan, Y.S. Wong, M. Rahman, A comparative experimental investigation of deep-hole micro-EDM drilling capability for cemented carbide (WC-Co) against austenitic stainless steel (SUS 304), International Journal of Advanced Manufacturing Technology Volume 46, Numbers 9-12, February, 2010.  https://doi.org/10.1007/s00170-009-2167-8 

• M.P. Jahan, Y.S. Wong, M. Rahman, A Comparative Study on the Performance of Sinking and Milling micro-EDM for Nanofinishing of Tungsten Carbide, International Journal of Nanomanufacturing Vol. 6, No.1/2/3/4  pp. 190 – 206, 2010.  https://doi.org/10.1504/IJNM.2010.034783 

2009

• M.P. Jahan, M.M.  Anwar, Y.S. Wong, M. Rahman, Nanofinishing of hard materials using micro-EDM, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 223, No. 9, pp. 1127-1142, 2009. [Received A.M. Strickland best journal paper award for 2009] https://doi.org/10.1243/09544054JEM1470 

• M.P. Jahan, Y.S. Wong, M. Rahman, A study on the fine-finish die-sinking micro-EDM of Tungsten Carbide using different electrode materials, Journal of Materials Processing Technology, Vol. 209, Issue 8, pp. 3956-3967, 2009. https://doi.org/10.1016/j.jmatprotec.2008.09.015 

• M.P. Jahan, Y.S. Wong, and M. Rahman, A study on the quality micro-hole machining of Tungsten Carbide by micro-EDM process using Transistor and RC-type pulse Generator, Journal of Materials Processing Technology, Vol. 209, Issue 4, pp. 1706-1716, 2009.  https://doi.org/10.1016/j.jmatprotec.2008.04.029 

• M.P. Jahan, Y.S. Wong, M. Rahman, A.B.M.A. Asad, An experimental investigation on the surface characteristics of Tungsten Carbide for the fine-finish Die-sinking and Scanning micro-EDM, International Journal of Abrasive Technology, Vol. 2, No. 3, pp. 223-244, 2009. DOI:10.1504/IJAT.2009.024396

• M.P. Jahan, Y.S. Wong and M. Rahman, Effect of non-electrical and gap control parameters in the micro-EDM of WC-Co, Journal of Machining & Forming Technologies, Vol. 1/2, pp. 51-78, 2009. 

2008 

• M.P. Jahan, Y.S. Wong, M. Rahman, A Comparative Study of Transistor and RC Pulse Generators for Micro-EDM of Tungsten Carbide, International Journal of Precision Engineering and Manufacturing, Vol. 9, No. 4, pp. 3-10, 2008. https://koreascience.kr/article/JAKO200835054218036.page 

PEER-REVIEWED CONFERENCE PAPERS

2025

• Nikita Shubin, M.P. Jahan, Machining High-Aspect-Ratio Microelectrodes Using Micro-EDM-Based Self-Drilled Holes Technique, 2025 International Manufacturing Science and Engineering Conference (MSEC 2025), University of Clemson, Clemson, SC, USA, June 23 – 27, 2025. 

• Ahkar Min Thant, Jianfeng Ma, M.P. Jahan, Enhancing Compressive Properties of SLS-printed Nylon Lattice Structures by Hybridization of Common Unit Cell Structures, 53rd SME North American Manufacturing Research Conference (NAMRC 53, 2025), University of Clemson, Clemson, SC, USA, June 23 – 27, 2025. 

2024

• Nabin Bastola, Jianfeng Ma, M. P. Jahan, Design and Numerical Investigation of the 3D Reinforced Re-entrant Auxetic and Hexagonal Lattice Structures for Energy Absorption Properties, 52nd SME North American Manufacturing Research Conference (NAMRC 52, 2024), University of Tennessee, Knoxville, USA, June 17-21, 2024. https://doi.org/10.1016/j.mfglet.2024.09.135

• Sk Md Alimuzzaman, Jianfeng Ma, M. P. Jahan, Numerical investigation on machining of additively manufactured CFRP composite with different build orientations and layer widths, 52nd SME North American Manufacturing Research Conference (NAMRC 52, 2024), University of Tennessee, Knoxville, USA, June 17-21, 2024. https://doi.org/10.1016/j.mfglet.2024.09.086 

2023

• Muhammad Abdun Nafi, Mahmud Anjir Karim, Shashi Lalvani, Paul F. James, Andrew Sommers, M. P. Jahan, “Investigating Wettability and Corrosion Resistance of the Titanium Alloy Surface Engineered by the WEDM Process”, 51st SME North American Manufacturing Research Conference (NAMRC 51, 2023), Rutgers University, USA, June 12-16, 2023. https://doi.org/10.1016/j.mfglet.2023.08.100 

• Mahmud Anjir Karim, Muhammad Abdun Nafi, M. P. Jahan, “Investigating Electrode Design Methodologies for Improving Productivity in Silicon Using Die Sinking EDM”, 2023 International Manufacturing Science and Engineering Conference (MSEC 2023), Rutgers University, USA, June 12-16, 2023. https://doi.org/10.1115/MSEC2023-105143 

• Esha Francis, Charles Ma, J. Ma, Muhammad Abdun Nafi, Mahmud Karim, M. P. Jahan, “An Experimental Investigation on Nanosecond Laser Ablation of Single Crystalline Silicon Wafers”, 2023 International Manufacturing Science and Engineering Conference (MSEC 2023), Rutgers University, USA, June 12-16, 2023. https://doi.org/10.1115/MSEC2023-104565 

• Charles K. Ma, Lesly Aguilar, Mahmud Karim‡, Muhammad Abdun Nafi, Jianfeng Ma, M. P. Jahan, “Experimental Investigation of Nanosecond Laser Machining of 3D Printed Carbon Fiber Reinforced Polymer (CFRP) Composite”, 51st SME North American Manufacturing Research Conference (NAMRC 51, 2023), Rutgers University, USA, June 12-16, 2023. https://doi.org/10.1016/j.mfglet.2023.08.077 

• Lesly Aguilar, Sallyjeehyun Shim, Jianfeng Ma, M.P. Jahan, Computational Modeling of Nanosecond Laser Ablation of Ti-6Al-4V, 2023 International Manufacturing Science and Engineering Conference (MSEC 2023), Rutgers University, USA, June 12-16, 2023. https://doi.org/10.1115/MSEC2023-101998 

• Max Matura, Sallyjeehyun Shim, Jianfeng Ma, M.P. Jahan, A Numerical Investigation on Nanosecond Laser Shock Peening of Ti-6Al-4V, 2023 International Manufacturing Science and Engineering Conference (MSEC 2023), Rutgers University, USA, June 12-16, 2023. https://doi.org/10.1115/MSEC2023-105071 

2022

• Mahmudul Hassan, Sk. Md. Alimuzzaman, Jianfeng Ma, M. P. Jahan, A comparative Numerical Investigation on Machining of Laminated and 3D Printed CFRP Composites, Proceedings of the ASME 2022 International Mechanical Engineering Congress & Exposition (IMECE2022), Oct 30-Nov 03, 2022, Columbus, Ohio, USA. https://doi.org/10.1115/IMECE2022-95257

• Jianfeng Ma, Mahmud Anjir Karim, M.P. Jahan, Sally Jee Hyun Shin, Shuting Lei, Nanosecond Laser Modification of Nickel-Titanium Based Shape Memory Alloy, Proceedings of the ASME 2022 International Mechanical Engineering Congress & Exposition (IMECE2022), Oct 30-Nov 03, 2022, Columbus, Ohio, USA. https://doi.org/10.1115/IMECE2022-95292

• Mahmudul Hassan, Jianfeng Ma, M. P. Jahan, Numerical modeling and simulation of machining of 3D printed CFRP composite, 50th SME North American Manufacturing Research Conference (NAMRC 50, 2022), West Lafayette, Indiana, on June 27 - July 1, 2022. https://doi.org/10.1016/j.mfglet.2022.07.055

• Jianfeng Ma, M. P. Jahan, Shuting Lee, Mark Gueli, Experimental investigation of nanosecond laser modification of bulk metallic glass, 2022 ASME International Manufacturing Science and Engineering Conference (MSEC2022), West Lafayette, Indiana, on June 27 - July 1, 2022. https://doi.org/10.1115/MSEC2022-86075 

2021

• M.P. Jahan, Yingbin Hu, Kwaku Yeboah, Jim Stahley, Modifying “Manufacturing Processes” Laboratory for Online/hybrid Learning Due to Covid-19, IMECE2021-70797, Proceedings of the ASME 2021 International Mechanical Engineering Congress & Exposition IMECE 2021, November 1-5, 2021, Virtual Conference. https://doi.org/10.1115/IMECE2021-70797 

• Mahmudul Hassan, J. Ma, M.P. Jahan, Numerical Investigation Into the Cutting Forces, Chip Formation Mechanism, and Burr Formation During Slot Milling of Laminated CFRP Composites, IMECE2021-73310, Proceedings of the ASME 2021 International Mechanical Engineering Congress & Exposition IMECE 2021, November 1-5, 2021, Virtual Conference. https://doi.org/10.1115/IMECE2021-73310  

• Oscar Pachon, Jianfeng Ma, Nick Schapet, M. P. Jahan, Shuting Lei, Irma Kuljanishvili, Experimental Investigation of Nanosecond Laser Ablation of Carbon Nanotubes, IMECE2021-73390, Proceedings of the ASME 2021 International Mechanical Engineering Congress & Exposition IMECE 2021, November 1-5, 2021, Virtual Conference. https://doi.org/10.1115/IMECE2021-73390 

• M. Gueli, J. Ma, N. Cococcetta, D. Pearl, M.P. Jahan, Experimental investigation into tool wear, cutting forces, and resulting surface finish during dry and flood coolant slot milling of Inconel 718, 49th SME North American Manufacturing Research Conference, NAMRC 49, Ohio, USA.  Published in Procedia Manufacturing 53, 236-245,  2021. https://doi.org/10.1016/j.promfg.2021.06.026 

2020

• C. Okwuashi, J. Ma, M. P. Jahan, A study on the tip-based nanomachining of silicon wafer using Atomic Force Microscopy (AFM), Proceedings of the ASME 2018 International Mechanical Engineering Congress & Exposition IMECE2020 November 15-19, 2020, Portland, Oregon, USA. https://doi.org/10.1115/IMECE2020-24258 

• N.M. Cococcetta, D. Pearl, M.P. Jahan, J. Ma, Investigating surface finish, burr formation, and tool wear during machining of 3D printed carbon fiber reinforced polymer composite, SME North American Manufacturing Research Conference, NAMRC 48, June 22-26, 2020, Cincinnati, OH, USA. https://doi.org/10.1016/j.jmapro.2020.04.025 

• A. Rashid, M.P. Jahan, Asma Perveen, Jianfeng Ma, Machining of Through Holes in Non-Conductive Aluminum Nitride Ceramic Using Electrical Discharge Machining Process, ASME 2020 15th International Manufacturing Science and Engineering Conference(MSEC 2020), June 22-26, 2020, Cincinnati, OH, USA. https://doi.org/10.1115/MSEC2020-8359 

• G. Pasken, J. Ma, M.P. Jahan, S. Lee, Numerical Simulation and Experiment Validation of Water Jet Machining of Ti-6Al-4V, ASME 2020 15th International Manufacturing Science and Engineering Conference (MSEC 2020), June 22-26, 2020, Cincinnati, OH, USA. https://doi.org/10.1115/MSEC2020-8356 

• G. Pasken, J. Ma, M.P. Jahan, S. Lee, Numerical Simulation of Pulsed Water Jet Machining of Al 6061-T6 and Ti-6Al-4V, ASME 2020 15th International Manufacturing Science and Engineering Conference (MSEC 2020), June 22-26, 2020, Cincinnati, OH, USA. https://doi.org/10.1115/MSEC2020-8358 

2019

• Asif Rashid, M. P. Jahan, D.Talamona and A. Perveen, Feasibility Study of Through Hole Fabrication on Aluminum Nitride Ceramics Using Die-sinking Electro-discharge Machining, 5th International Conference on Mechanical, Manufacturing and Plant Engineering (ICMMPE 2019), 19th - 21st November 2019, Swiss Garden Kuala Lampur, Malaysia. https://doi.org/10.1007/978-981-15-5753-8_49 

• Azat Bilal, Asif Rashid, Chong Liu, M. P. Jahan, Didier Talamona and Asma Perveen, Powder mixed Micro Electro Discharge Machining of Aluminium nitride Ceramic, 2019 The 3rd International Conference on Building Materials and Materials Engineering (ICBMM 2019), NOVA University of Lisbon, Portugal, September 25-27, 2019. https://doi.org/10.1051/matecconf/201930306002 

• Chong Liu, Asif Rashid, Muhammad P. Jahan, Jianfeng Ma, Machining of High Aspect Ratio Micro-holes in Titanium Alloy Using Silver Nano Powder Mixed Micro-EDM,  Proceedings of the ASME 2019 International Mechanical Engineering Congress and Exposition (IMECE 2019). November 11-14, Salt Lake City, UT, USA. https://doi.org/10.1115/IMECE2019-10944 

• Chong Liu, Asif Rashid, Muhammad P. Jahan, Jianfeng Ma, Investigating the Micro-EDM Machinability of Bulk Metallic Glass in Micro-EDM Drilling,  Proceedings of the ASME 2019 International Mechanical Engineering Congress and Exposition (IMECE 2019). November 11-14, Salt Lake City, UT, USA. https://doi.org/10.1115/IMECE2019-10940 

• Asif Rashid, Muhammad P. Jahan, Asma Perveen, Jianfeng Ma, Development of Trends and Methodologies for Shaping Ceramics by Electrical Discharge Machining: A Review, Proceedings of the ASME 2019 International Mechanical Engineering Congress and Exposition (IMECE 2019). November 11-14, Salt Lake City, UT, USA. https://doi.org/10.1115/IMECE2019-10946 

• Craig Hanson, Pratik Hiwase, Xingbang Chen, Muhammad P. Jahan, Jianfeng Ma and Greg Arbuckle, Experimental investigation and numerical simulation of burr formation in micro-milling of polycarbonates, 46th North American Manufacturing Research Conference (NAMRC 2019), June 10-14, 2019, Erie, PA, USA. Published in Procedia Manufacturing 34, 293-304. https://doi.org/10.1016/j.promfg.2019.06.153 

• Megan Shockly, Nick Duong, Jianfeng Ma, Shuting Lei, Muhammad P. Jahan, and Murali Sundaram, Numerical Investigation of the Effects of Operating Parameters in the Vibration Assisted Nano Impact Machining of Single Crystalline Silicon by Loose Abrasive using Molecular Dynamics Simulation, 46th North American Manufacturing Research Conference (NAMRC 2019), June 10-14, 2019, Erie, PA, USA. https://doi.org/10.1016/j.jmapro.2019.03.044 

• Chong Liu, Nick Duong, Muhammad P. Jahan, Jianfeng Ma and Roan Kirwin, Experimental investigation and numerical simulation of micro-EDM of bulk metallic glass with focus on surface finish, 46th North American Manufacturing Research Conference (NAMRC 2019), June 10-14, 2019, Erie, PA, USA. Published in Procedia Manufacturing 34, 275-286, 2019. https://doi.org/10.1016/j.promfg.2019.06.151 

• Ashutosh Khatri, Muhammad P. Jahan, Xingbang Chen, Jianfeng Ma, Investigating Microstructural Changes and Phase Transformation During Slot Milling of Ti-6Al-4V in Dry, Flood Coolant and MQL Conditions, Proceedings of the ASME 2019 14th InternationalManufacturing Science and Engineering Conference (MSEC 2019), June 10-14, 2019, Erie, PA, USA.  https://doi.org/10.1115/MSEC2019-3012 

• Greg Pasken, J. Ma, Muhammad P. Jahan, Shuting Lei, Numerical Simulation of Pure Water Jet Machining of Al 6061-T6 with Experimental Validation, Proceedings of the ASME 2019 14th InternationalManufacturing Science and Engineering Conference (MSEC 2019), June 10-14, 2019, Erie, PA, USA. https://doi.org/10.1115/MSEC2019-2712 

• Nick H. Duong,J. Ma, Muhammad P. Jahan, Shuting Lei, Murali Sundaram, FEM Investigation of Damage Evolution at Elevated Temperatures within Multiple Impact Hits in Vibration Assisted Nano Impact Machining by Loose Abrasives, Proceedings of the ASME 2019 14th InternationalManufacturing Science and Engineering Conference (MSEC 2019), June 10-14, 2019, Erie, PA, USA.  https://doi.org/10.1115/MSEC2019-2707 

2018

• Ashutosh Khatri, Muhammad P. Jahan, Investigating the microstructure and morphology of chips in dry, flood coolant and MQL machining of Ti-6Al-4V, 16th Global Conference on Sustainable Manufacturing, Lexington, Kentucky, USA, 2nd – 4th October, 2018. [Received NSF sponsored travel grant to attend the conference] DOI:10.1504/IJSM.2020.10028820 

• Craig Hanson, Xingbang Chen, Muhammad P. Jahan, J. Ma, Gregory K Arbuckle, Investigating the Effect of Tool Coating on Cutting Forces and Tool Wear During Micro-Milling of Polycarbonate Glass, Proceedings of the ASME 2018 International Mechanical Engineering Congress & Exposition (IMECE2018), November 9-15, 2018, Pittsburgh, Pennsylvania, USA. https://doi.org/10.1115/IMECE2018-87441 

• Gregory Pasken, J. Ma, M. McQuilling, Muhammad P. Jahan, Numerical Modeling of a Pure Water Jet Machining of Ti-6Al-4V and Al 6061-T6 Using ABAQUS and Smoothed Particle Hydrodynamics, Proceedings of the ASME 2018 International Mechanical Engineering Congress & Exposition (IMECE2018), November 9-15, 2018, Pittsburgh, Pennsylvania, USA. https://doi.org/10.1115/IMECE2018-87271 

• Nick H. Duong, J. Ma,  Muhammad P. Jahan, Shuting Lei, FEM Investigation of Phase Transformation in Vibration Assisted Nano Impact Machining by Loose Abrasives (VANILA),Proceedings of the ASME 2018 International Mechanical Engineering Congress & Exposition (IMECE2018), November 9-15, 2018, Pittsburgh, Pennsylvania, USA. https://doi.org/10.1115/IMECE2018-87274 

• Roan M Kirwin, Rashef Mahbub, M.P. Jahan, Investigating the effect of wire feed rate and wire tension on the corner and profile accuracies during wire EDM of Ti-6Al-4V, 13th ASME Manufacturing Science and Engineering Conference (MSEC2018), June 18 – June 22, 2018, College Station, Texas [Roan received NSF Sponsored Travel Award for attending and presenting his paper]. https://doi.org/10.1115/MSEC2018-6540 

• Xingbang Chen, Ashutosh Khatri, Jianfeng Ma, M.P. Jahan, Numerical Investigation of the slot up milling of Ti-6Al-4V, 13th ASME Manufacturing Science and Engineering Conference (MSEC2018), June 18 – June 22, 2018, College Station, Texas, USA. https://doi.org/10.1115/MSEC2018-6498 

• Han Wu, Jianfeng Ma, Qingling Meng, M. P. Jahan, Farshid Alavi, Numerical modeling of electrical discharge machining of Ti-6Al-4V, 46th SME North American Manufacturing Research Conference, NAMRC 46, June 18 – June 22, 2018, College Station, Texas, USA. Published in Procedia Manufacturing 26 (2018) 359–371. https://doi.org/10.1016/j.promfg.2018.07.044 

• Ashutosh Khatri, M.P. Jahan, Investigating tool wear mechanisms in machining of Ti-6Al-4V in flood coolant, dry and MQL conditions, 46th SME North American Manufacturing Research Conference, NAMRC 46, June 18 – June 22, 2018, College Station, Texas, USA. Published in Procedia Manufacturing 26 (2018) 434–445. [Ashutosh received NSF Sponsored Travel Award for attending and presenting his paper]. https://doi.org/10.1016/j.promfg.2018.07.051 

• M.P. Jahan, Shahnaz Aly, Engaging undergraduate students in hands-on research using undergraduate-specific small internal grants from university, 125th ASEE Annual Conference & Exposition, June 24 - 27, 2018, Salt Lake City, Utah. DOI:10.18260/1-2--30400 

• M.P. Jahan, Engaging undergraduate students using real life ergonomic problems in the introductory Ergonomics class, 125th ASEE Annual Conference & Exposition, June 24 - 27, 2018, Salt Lake City, Utah. DOI:10.18260/1-2--30401 

• Asma Perveen, M.P. Jahan, Modeling and optimization of crater size generated during micro-EDM of Ti alloy using Response Surface Method, Proceedings of International Conference on Materials Processing and Characterization (ICMPC 2018), 16 - 18 March, 2018, Hyderabad, India. Published in Materials Today: Proceedings 5 (9), 18307-18314, 2018. https://doi.org/10.1016/j.matpr.2018.06.169 

2017

• Asma Perveen, M.P. Jahan, Application of Box Behnken design to model crater size generated during micro-EDM of Ni-X alloy,  6th International Conference on Material Science and Engineering Technology (ICMSET 2017), Seoul, Republic of Korea, October 20-22, 2017.  DOI:10.18178/ijmerr.7.3.229-234  

• Maxim Lu, Asma Perveen, M.P. Jahan, Effect of tool coated with conductive and non-conductive layer on micro-EDM characteristic of Ni based X alloy, euspen’s 17th International Conference & Exhibition, 29th May – 2nd June, 2017, Hannover, Germany. [Maxim Lu was selected for Heidenhain Scholarship/Award to present the paper]. https://www.euspen.eu/knowledge-base/ICE17322.pdf 

• Asma Perneen, M.P. Jahan, Syrymbet Zhumagulov, Statistical Modeling and Optimization of Micro Electro Discharge Machining of Ti Alloy, Proceedings of International Conference on Materials Processing and Characterization (ICMPC 2017), 17 - 19 March, 2017, Hyderabad, India. Published in Materials Today: Proceedings 5 (2), 4803-4810, 2018. https://doi.org/10.1016/j.matpr.2017.12.054 

• M.P. Jahan, Pegah Kakavand, Farshid Alavi, A comparative study on micro-electro-discharge- machined surface characteristics of Ni-Ti and Ti-6Al- 4V with respect to biocompatibility, 45th North American Manufacturing Research Conference (NAMRC 2017), June 4-8, 2017, Los Angeles, California, USA. Published in Procedia Manufacturing, Volume 10, 2017, Pages 232–242. https://doi.org/10.1016/j.promfg.2017.07.051 

• Asma Perveen, M.P. Jahan, Comparative micro-EDM studies on Ni based X-alloy using coated and uncoated tools, Proceedings of 5th International Conference on Nano and Materials Science, ICNMS 2017, January 19 – 21, 2017, San Diego, USA. Published in Materials Science Forum, Vol. 911, pp. 13-19, 2018. DOI:10.4028/www.scientific.net/MSF.911.13 

2016

• Asma Perveen, M.P. Jahan, An Experimental Study on the Effect of Operating Parameters during the Micro-Electro-Discharge Machining of Ni Based Alloy, 18th International Conference on Advanced Manufacturing Technology, ICAMT 2016, November 07 - 08, 2016, Venice, Italy. [Received best conference paper award]. (DOI): doi.org/10.5281/zenodo.1127418 

• Mark Doggett, M.P. Jahan, Perceptions of Advanced Manufacturing Competency Model (AMCM) for Curriculum Development, Proceedings of The 2016 IAJC/ISAM Joint International Conference, September 25-27, 2016 - Orlando, Florida, ISBN 978-1-60643-379-9 . http://cd16.iajc.org/wp-content/uploads/Camera-ready-papers/083-x-16___Perceptions%20of%20the%20Advanced%20Manufacturing%20Competency%20Model%20_REVISED--Doggett%2C%20Jahan_.pdf 

• M.P. Jahan, Kamlakar P. Rajurkar, Ajay P. Malshe, A Comparative Study of the Capabilities of Dry and Wet Nano-scale Electro-machining, 18th International Symposium on Electromachining (ISEM XVIII), 19-22th, April 2016, Tokyo, Japan. Published in Procedia CIRP, 42 (2016) 155–160. https://doi.org/10.1016/j.procir.2013.03.081 

2015

• M.P. Jahan, Mark Doggett, Manufacturing and Non-Manufacturing Students’ Perceptions on the Applicability of the Four Pillars Competencies, The Association of Technology, Management, and Applied Engineering (ATMAE) Annual Conference 2015, November 11 - 14, Pittsburgh, Pennsylvania. https://cdn.ymaws.com/www.atmae.org/resource/resmgr/Event_Materials/2015_ATMAE_Proceedings.pdf 

• M.P. Jahan, Mark Doggett, A Study on the Students’ Perceptions of the Applicability of Lean Principles at Universities, In Proceedings of 122nd Annual Conference of American Society of Engineering Education (ASEE) 2015, June 14-17, Seattle, WA. https://peer.asee.org/a-study-on-the-students-perceptions-of-the-applicability-of-lean-principles-at-universities DOI: 10.18260/p.23456 

2014

• Mark Doggett, M.P. Jahan, Perceptions of Manufacturing Management Knowledge and the Four Pillars, The Association of Technology, Management, and Applied Engineering (ATMAE) Conference 2014, November 19 - 21, Saint Louis, Missouri. [Received best conference paper award]. https://cdn.ymaws.com/www.atmae.org/resource/resmgr/Best_Paper/2014_Best_Paper.pdf  

2013

• K.P. Rajurkar, M.P. Jahan, A.P. Malshe, A Review of the Nano Scale Electro-machining (nano-EM) Processes, In Proceedings of COPEN-8: 2013, An International Conference on Precision, Meso, Micro and Nano Engineering, NIT Calicut, Kerala, India, December 13-15, 2013 

• M.P. Jahan, K.P. Rajurkar, A.P. Malshe, Understanding Material Removal Process and Heat Affected Zone in Nano-metric Electro-machining of Graphene, Transaction of NAMRI/SME, 2013, North American Manufacturing Research Conference (NAMRC 2013), June 10-14, 2013, Madison, Wisconsin, USA 

• M.P. Jahan, Kumar R. Virwani, Kamlakar P. Rajurkar, Ajay P. Malshe, A Comparative Study of the Dry and Wet Nano-scale Electro-machining, 17th International Symposium on Electromachining (ISEM XVII), 9-12th, April 2013, Leuven, Belgium. Published in Procedia CIRP, Elsevier, 6 (2013) 627–632. https://doi.org/10.1016/j.procir.2013.03.081 

2012

• M.P. Jahan, Ajay P Malshe, K.P. Rajurkar, Experimental Investigation and Characterization of Nano-scale Dry Electro-machining, 40th Annual SME North American Manufacturing Research Conference (NAMRC XL), June 4-8, 2012, University of Notre Dame, Indiana, USA. [Received best conference paper award]. https://doi.org/10.1016/j.jmapro.2012.08.004

• Wenyang Zhang, M. P. Jahan, and Ajay P. Malshe, Mechanistic and Structural Study of Friction Polymer Based Tribo-chemical Lubricant Film, to be submitted in International Joint Tribology Conference IJTC-2012, Oct 8 -10, 2012 in Denver, Colorado.  DOI:10.1115/IJTC2012-61119 

2010

• M.P. Jahan, M. Rahman, Y.S. Wong; Migration of Materials during Finishing Micro-EDM of Tungsten Carbide;  APCMP2010 - The 9th Asia-Pacific Conference on Materials Processing, 7-10 June 2010, Sydney, Australia. Published in Key Engineering Materials, Vol. 443, pp. 681-686, 2010. https://doi.org/10.4028/www.scientific.net/KEM.443.681 

• M.P. Jahan, M. Rahman, Y.S. Wong, Modeling and experimental study of vibration-assisted micro-EDM of cemented carbide, euspen 10th International Conference; Delft, Netherlands; May 31st -4th June, 2010, In proceedings: Vol. 2, pp. 202-207. [Received Heidenhain young researcher award]. https://www.euspen.eu/knowledge-base/ICE10282.pdf 

2009

• M.P. Jahan, M. Rahman, Y.S. Wong, L. Fuhua, Fabrication of high-aspect-ratio EDM microelectrodes using on-the-machine tool fabrication techniques, The 8th International Conference of Mechanical Engineering (ICME2009), 26-28 December, 2009, BUET, Dhaka, Bangladesh. https://me.buet.ac.bd/icme/icme2009/Proceedings/PDF/ICME09-RT-22.pdf 

• M.P. Jahan, Y.S. Wong and M. Rahman, A study on fine-finish micro-EDM of tungsten carbide in nanopowder-mixed dielectric, 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN) 2009, November 11th-13th, 2009, Japan. 

• Asma Perveen, M.P. Jahan, Y.S. Wong and M. Rahman, Cutting force analysis of on-machine fabricated PCD tool during glass micro-grinding, AMPT 2009, 26 - 29 October, 2009, Kuala Lumpur, Malaysia. Published in Advanced Materials Research, Volumes 264 – 265,  pp. 1085 – 1090, 2011. DOI:10.4028/www.scientific.net/AMR.264-265.1085 

• M.P. Jahan, T. Saleh, Y.S. Wong and M. Rahman, Study of micro-EDM of tungsten carbide with workpiece vibration, Advances in Materials and Processing Technologies conference (AMPT 2009), 26 - 29 October, 2009, Kuala Lumpur, Malaysia. Published in Advanced Materials Research, Volumes 264 – 265, pp. 1056 – 1061, 2011. DOI:10.4028/www.scientific.net/AMR.264-265.1056 

2008

• M.P. Jahan, Y.S. Wong and M. Rahman, A comparative study on the performance of sinking and milling micro-EDM for nanofinishing of tungsten carbide, 6th International Symposium on Nano Manufacturing (ISNM-6), 12-14 November, 2008, Athens, Greece (CD ROM proceedings). https://doi.org/10.1504/IJNM.2010.034783 

• M.P. Jahan, M.M. Anwar, Y.S. Wong, M. Rahman, Generation of nano-level surface finish in the micro-EDM of hard tool/die materials using RC-generator, The 1st International Conference on Nanomanufacturing (nanoMan 2008), SMU, Singapore, July 14-16 , 2008, pp. 342 - 351 (CD ROM proceedings). 

• M.P. Jahan, Y.S. Wong, M. Rahman, A.B.M.A. Asad, An experimental investigation on the surface characteristics of Tungsten Carbide for the fine-finish Die-sinking and Scanning micro-EDM, The 7th Asia Pacific Conference on Materials Processing (APCMP), Guangzhou-Guilin, China, June 15-20, 2008, pp. 612-617 (CD ROM proceedings). DOI:10.1504/IJAT.2009.024396 

2007

• M.P. Jahan, Y.S. Wong, M. Rahman; A comparative study on the performance of Transistor and RC type Pulse generator with focus in obtaining best quality micro-hole during the micro-EDM of Tungsten Carbide; “CPIE-2007” 22-24 March, 2007,  NITJ-INDIA, (CD ROM proceedings).                                                                                  

• M.P. Jahan, Y.S. Wong, M. Rahman; Towards Fine-finish micro-EDM of Tungsten Carbide using RC-Generator; In Proceedings of 'Asian Electrical Machining Symposium ’07; 28-30 November 2007', Nagoya, Japan, pp. 252-257.  https://cir.nii.ac.jp/crid/1571698600539175296 

• M.P. Jahan, Y.S. Wong, M. Rahman; Identification of operating parameters for improved performance of micro-EDM of Tungsten Carbide; In Proceedings of ‘euspen 7th Int. Conference; Bremen, Germany; May 20th-24th, 2007.’ Vol. II, pp. 336-339.  [Received Heidenhain young researcher award]

BOOK CHAPTERS (INVITED AND/OR PEER REVIEWED) 

• Faysal Haque, Mahmud Karim, M.P. Jahan, Surface Properties of 3D Printed Biomedical Prototypes, In Book: 3D Printing for Biomedical Engineering, Editor: Md Enamul Hoque, Elsevier, 2024.

• David K. Orisekeh, Giancarlo Corti, M. P. Jahan, Biomedical Applications of Polylactic Acid-Based Composites, In Book “Advanced Manufacturing and Joining Technologies for Composite Materials”, Editors: Dr. Pawan Kumar Rakesh, Elsevier, 2024. 

• M. A. Nafi, M.P. Jahan, Functional EDMed Surface for Bioapplication, Chapter 8, Section 11: Advanced Machining Technologies (Section Editor: Professor Mustafizur Rahman), In Book “Comprehensive Materials Processing, 2E”, Editor in Chief: Saleem Hashmi, Elsevier, 2024. DOI: 

10.1016/B978-0-323-96020-5.00237-5

• M. A. Karim, M. P. Jahan, Electrical discharge machining (EDM) technologies in aerospace industry, Chapter 7, “Modern Manufacturing Processes for Aircraft Materials" (Editor(s)/Author(s): Selim Gürgen, Catalin Pruncu), pp. 171-226, Elsevier, 2024, https://doi.org/10.1016/B978-0-323-95318-4.00007-0

• Nikita Shubin and M. P. Jahan, High-Speed Machining for Aerospace Materials, “Advances in Manufacturing for Aerospace Alloys”, Editor(s): Selim Gürgen, Springer, 2024, https://doi.org/10.1007/978-3-031-64455-9_2

• Sk Md Alimuzzaman, M. P. Jahan, Composite Based Additive Manufacturing, In Book " Practical Implementations of Additive Manufacturing Technologies", Editor: Dr. Shashanka Rajendrachari, Chapter 6, Pages 117 – 152, Hardcover ISBN 978-981-99-5948-8, Springer, 2023. https://doi.org/10.1007/978-981-99-5949-5_6

• David Orisekeh, M.P. Jahan§, Processing of Bioceramics by Additive Manufacturing, Book: Advanced Bioceramics: Processing, Properties, and Applications, Editors: Md Enamul Hoque, Kheng Lim Goh, Suresh Sagadevan, Taylor & Francis (CRC Press), 94-127, 2023 ,  https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan

• M. A. Karim, M. P. Jahan, Electrical Discharge Machining of Silicon – Current Progress and Future Trends, Chapter 5, Pages 139-170, In “Non-Conventional Machining (Editor: J Paulo Davim), ISBN 978-3-11-058410-3, DE Gruyter, 2022. https://doi.org/10.1515/9783110584479-005 

• Rashef Mahbub, Asif Rashid, Muhammad P. Jahan, Hybrid Machining and Finishing Processes, Chapter 8, Pages 287-338, "In Handbooks in Advanced Manufacturing, Advanced Machining and Finishing" (Editors: Alokesh Pramanik and Kapil Gupta), ISBN 9780128174524, Elsevier, 2021. https://doi.org/10.1016/B978-0-12-817452-4.00019-1 

• Rashef Mahbub, Asif Rashid, M.P. Jahan, Strategies of Improving Accuracy in Micro-EDM, Chapter 7, Pages 159-190, “Micro and Nano Electro-Fabrication" (Editors: T. Saleh, M.S. M. Ali, K. Takahata), ISBN: 978-0-12-820049-0, Elsevier, 2021. https://doi.org/10.1016/B978-0-12-820049-0.00013-X 

• Asif Rashid, M.P. Jahan, Microfabrication by electrical discharge machining-based Hybrid Processes, Chapter 2, Pages 33-60. “Micro and Nano Electro-Fabrication" (Editors: T. Saleh, M. S. M. Ali, K. Takahata), ISBN: 978-0-12-820049-0, Elsevier, 2021. https://doi.org/10.1016/B978-0-12-820049-0.00008-6 

• Asif Rashid, Muhammad P. Jahan, Advances in Abrasive Assisted EDM and Micro-EDM, In "Advances in Abrasive Based Machining and Finishing Processes" (Editors: S. Das, G. Kibria, B. Doloi, B. Bhattacharyya), ISBN 978-3-030-43312-3, Chapter 5, pp. 97-128. Springer International Publishing,  2020. https://doi.org/10.1007/978-3-030-43312-3_5 

• M.P. Jahan, “Electro-Discharge Machining" Chapter 16, pp. 377-410. “Modern Manufacturing Processes” (Editors: Muammer Koc, Tuğrul Özel), Print ISBN:9781118071922 |Online ISBN:9781119120384,Wiley, 2019.  https://doi.org/10.1002/9781119120384.ch16 

• Roan Kirwin, Aakash Niraula, Chong Liu, Landon Kovach and Muhammad P. Jahan, Optimization of Electric Discharge Machining Based Processes, Chapter 3, pp. 29-63. In "Optimization of Manufacturing Processes" (Editor: Kapil Gupta and Munish Kumar Gupta), ISBN 978-3-030-19638-7, Springer International Publishing, AG, 2019. https://doi.org/10.1007/978-3-030-19638-7_2 

• Aakash Niraula, Ashutosh Khatri and Muhammad P. Jahan, Graphene as Nanolubricant for Machining, In "Graphene in Energy, Healthcare and Environmental Applications", Chapter 2, pp. 27 - 48, Volume 5, Handbook on the Graphene Materials (Editor: Cengiz Ozkan and Umit Ozkan), ISBN: 978-1-119-46973-5, Wiley, USA, 2019. https://www.wiley.com/en-us/Handbook+of+Graphene,+Volume+5:+Energy,+Healthcare,+and+Environmental+Applications-p-9781119469711 

• Rashef Mahbub, Asma Perveen, Muhammad P. Jahan, Sequential Micro-EDM, Chapter 10, pp. 209-229, In “Micro Electrical Discharge Machining Processes-Technologies and Applications” (Editors: G. Kibria, M.P. Jahan, B. Bhattacharyya), Springer Nature, 2018. https://doi.org/10.1007/978-981-13-3074-2_10 

• Taylor Daniel, Chong Liu, Junyu Mou, Muhammad P. Jahan, Micro Wire-EDM, Chapter 4, pp. 67-92, In “Micro Electrical Discharge Machining Processes-Technologies and Applications” (Editors: G. Kibria, M.P. Jahan, B. Bhattacharyya), ISBN 978-981-13-3074-2, Springer Nature, 2018. https://doi.org/10.1007/978-981-13-3074-2_4 

• S. N. B. Oliaei, Muhammad P. Jahan, A. Perveen, Micro-EDM Drilling, Chapter 1, pp. 1-21, In “Micro Electrical Discharge Machining Processes-Technologies and Applications” (Editors: G. Kibria, M.P. Jahan, B. Bhattacharyya), ISBN 978-981-13-3074-2, Springer Nature, 2018. https://doi.org/10.1007/978-981-13-3074-2_1 

• Rashef Mahbub and M.P. Jahan, Micromachining of Titanium Alloys, Chapter 3, pp. 33-63, "Micro and Nano Machining of Engineering Materials - Recent Developments", Editor: Prof. K. Kumar, ISBN 978-3-319-99900-5, Springer Nature, 2018. https://doi.org/10.1007/978-3-319-99900-5_3 

• Ann M. Rumsey, Muhammad P. Jahan, Micromachining of Aluminum Alloys, Vol. 2, pp. 1557-1591, in "Encyclopedia of Aluminum and Its Alloys", (Editors George E. Totten, Olaf Kessler and Murat Tiryakioglu), ISBN 9781466510807, Taylor and Francis, 2018. https://www.routledge.com/Encyclopedia-of-Aluminum-and-Its-Alloys-Two-Volume-Set-Print/Totten-Tiryakioglu-Kessler/p/book/9781466510807 

• M.P. Jahan, Pegah Kakavand, “EDM of Shape Memory Alloys”, “Electrical Discharge Machining (EDM): Types, Technologies and Applications” (Editor: M.P. Jahan), Chapter 14, pp. 457-489, Nova Science Publishers, ISBN: 978-1-63483-591-6, NY, USA, 2015.  https://novapublishers.com/shop/electrical-discharge-machining-edm-types-technologies-and-applications/ 

• M.P. Jahan, “Introduction and Overview of EDM”, “Electrical Discharge Machining (EDM): Types, Technologies and Applications” (Editor: M.P. Jahan), Chapter 1, pp. 1-32, Nova Science Publishers, ISBN: 978-1-63483-591-6, NY, USA, 2015.  https://novapublishers.com/shop/electrical-discharge-machining-edm-types-technologies-and-applications/ 

• M.P. Jahan, M. Rahman and Y.S. Wong, Micro-EDM: processes, varieties and applications, “Comprehensive Materials processing, Volume 11: Advanced Machining Technologies, chapter 14, pp. 333-371, ISBN: 978-0-08-096533-8; Editor in Chief: Saleem Hashmi, Elsevier, 2014. https://doi.org/10.1016/B978-0-08-096532-1.01107-9 

• M. Rahman, M.P. Jahan, A.B.M.A. Asad, and Y.S. Wong, Compound and Hybrid Micromachining Processes, “Comprehensive Materials processing, Volume 11: Advanced Machining Technologies, chapter 5, pp. 89-112, ISBN: 978-0-08-096533-8; Editor in Chief: Saleem Hashmi, Elsevier, 2014.  https://doi.org/10.1016/B978-0-08-096532-1.01105-5 

• M.P. Jahan, “Micro-Electrical Discharge Machining - Chapter 4”, in “NONTRADITIONAL MACHINING PROCESSES: Research advances” (Editor: Prof. J. Paulo Davim), Chapter 4, pp. 111-151, ISBN: 978-1-4471-5178-4 (Print), Springer, 2013. https://doi.org/10.1007/978-1-4471-5179-1_4 

• M.P. Jahan, A.B.M.A. Asad, M. Rahman, Y.S. Wong, T. Masaki, Micro-Electro Discharge Machining (µEDM), Chapter 10, pp. 301 – 346, Micro-Manufacturing: Design and Manufacturing of Micro-Products, Edited by Muammer Koc and Tugrul Ozel, ISBN: 978-0-470-55644-3, John Willey and Sons, Inc., June 2011. https://www.wiley.com/en-us/Micro+Manufacturing:+Design+and+Manufacturing+of+Micro+Products-p-9780470556443 

• M.P. Jahan, Y.S. Wong and M. Rahman, Effect of non-electrical and gap control parameters in the micro-EDM of WC-Co, Chapter 3, pp. 31 – 56, Machining & Forming Technologies  - Volume  1, Edited by J. Paulo Davim, ISBN: 978-1-61122-000-1, Nova Publishers, NY, USA, 2011.

EDITED BOOKS 

• “Micro Electrical Discharge Machining Processes-Technologies and Applications” (Editors: G. Kibria, M.P. Jahan, B. Bhattacharyya), Springer Nature, 2018. https://link.springer.com/book/10.1007/978-981-13-3074-2 

• “Electrical Discharge Machining (EDM): Types, Technologies and Applications” (Editor: M.P. Jahan), Nova Science Publishers, NY, USA, 2015. https://novapublishers.com/shop/electrical-discharge-machining-edm-types-technologies-and-applications/ 

EDITED SPECIAL ISSUES

• "Micro and Nano Machining Processes - Vol 2" Edited by Muhammad Pervej Jahan,  Micromachines, 2023. https://www.mdpi.com/journal/micromachines/special_issues/Micro_Nano_Machining_Processes_Volume_II 

• "Intelligent Additive/Subtractive Manufacturing”, Edited by Dr. Muhommad Azizur Rahman, Dr. Tanveer Saleh, Dr. Muhammad Pervej Jahan, 2023. https://www.mdpi.com/journal/micromachines/special_issues/Intelligent_Additive_Subtractive_Manufacturing 

• "Advanced Grinding Technology", Edited by Dr. Shuoshuo Qu, Dr. Shuiquan Huang, Dr. Yuying Yang, Dr, M. P. Jahan, Frontiers in Materials Journal, 2023, https://www.frontiersin.org/research-topics/53084/advanced-grinding-technology 

• "Electrical Discharge Machining (EDM) and EDM-Based Hybrid Machining" Edited by Muhammad Pervej Jahan, Journal of Manufacturing and Materials Processing, 2022. https://www.mdpi.com/journal/jmmp/special_issues/electrical_discharge_machining 

• "Micro and Nano Machining Processes - Vol 1" Edited by Muhammad Pervej Jahan,  Micromachines, 2021 https://www.mdpi.com/journal/micromachines/special_issues/Micro_Nano_Machining_Processes 

• "Micro Manufacturing" edited by B. Kuriachen and M. P. Jahan, Materials and Manufacturing Processes Journal, 2020. https://www.tandfonline.com/toc/lmmp20/36/13 

• Prof. B. Ramesh, Prof. Chang-Chun Lee, Dr. Ridwan Yahaya, Dr. Muhammad P. Jahan, Special Issue "Data Computation in Advanced Composites: Characterization, Machining, and Waste Management", Tech Science Press, 2019. https://www.techscience.com/cmes/special_detail/data_computation 

• “Recent Advances in Synthesis and Coatings of Nanocomposites”, B. Ramesh, Ridwan Yahaya, Muhammad P. Jahan, 2022, https://www.hindawi.com/journals/jnm/si/284340/

KEYNOTE SPEECHES

• “Sustainable post-processing of 3D printed CFRP composites – A numerical and experimental study”, ICMSM 2023 International Conference on Materials Science and Manufacturing, November 17-18, 2023, Turkey, (Virtual mode). 

• “Sustainable post-processing of 3D printed parts - A case study for CFRP composites and future prospects”, 12th International Conference on Materials Processing and Characterization (ICMPC 2021), 6 – 9 October, 2021, Virtual.

PRESENTATIONS, POSTERS AND ABSTRACTS

2024

• Regis Rugerinyange, Bruce Hardman, Yingbin Hu, M.P. Jahan, Enhancing Compressive Properties of SLS-Printed Thermoplastic Lattice Structures Using Thermoset Reinforcement Coatings, 16th Dayton Engineering Sciences Symposium - ASME Dayton Section, 29 October, 2024, Kennedy Union, University of Dayton, Dayton, Ohio, USA.

•  Chang Liu, Yingbin Hu, M.P. Jahan, Acoustic Field-Assisted Inkjet Printing of Graphene-Reinforced Polydimethylsiloxane (PDMS) Composites, 16th Dayton Engineering Sciences Symposium - ASME Dayton Section, 29 October, 2024, Kennedy Union, University of Dayton, Dayton, Ohio, USA.

•  Nikita Subin, M.P. Jahan, Dimensional and Spectroscopy Analysis of High-Aspect-Ratio Microelectrodes Fabricated by Self-Drilled Micro-EDM Technique, The 2024 Graduate Research Forum, Friday, November 1, 2024, Amstrong Students Center, Miami University, Oxford, OH.

• Regis Rugerinyange, Bruce Hardman, Yingbin Hu, M.P. Jahan, Enhancing Compressive Properties of SLS-Printed Nylon Lattice Structures Using Thermoset Resin Coatings, The 2024 Graduate Research Forum, Friday, November 1, 2024, Amstrong Students Center, Miami University, Oxford, OH.

• Chang Liu, Yingbin Hu, M.P. Jahan, Insights into the acoustic field-assisted inkjet printing of graphene-reinforced polydimethylsiloxane (PDMS) composites, The 2024 Graduate Research Forum, Friday, November 1, 2024, Amstrong Students Center, Miami University, Oxford, OH.

2023

• Nabin Bastola, Jianfeng Ma, M. P. Jahan, Dual-phase lattice structure design for improved mechanical strength and energy absorption properties of 3D printed polymers, The 2023 Graduate Research Forum, Friday, November 3, 2023, Amstrong Students Center, Miami University, Oxford, OH.

•  Sk Md. Alimuzzaman, Jianfeng Ma, M.P. Jahan, A Numerical Investigation on Machinability of 3D Printed CFRP Composite using Deformable Cutting Tool, The 2023 Graduate Research Forum, Friday, November 3, 2023, Amstrong Students Center, Miami University, Oxford, OH.

• Nikita Subin, M. P. Jahan, High-Aspect-Ratio Microelectrodes Fabrication Using the Self-Drilled Holes Technique in Micro Electrical Discharge Machining, The 2023 Graduate Research Forum, Friday, November 3, 2023, Amstrong Students Center, Miami University, Oxford, OH.

• Joshua Adjei-Yeboah, M.P. Jahan, 3D Printing of Bio Fiber Based Polymer Composites – A review, The 2023 Graduate Research Forum, Friday, November 3, 2023, Amstrong Students Center, Miami University, Oxford, OH.

2022

• David Orisekeh, Giancarlo Corti, M.P. Jahan, "Sustainable Materials for Additive Manufacturing: Eggshells Microparticles Reinforced Polylactic Acid Filaments for 3D Printing", 7th International Forum on Sustainable Manufacturing, Lexington, KY on October 26th - 27th, 2022.

• Sk Md. Alimuzzaman, Mahmudul Hassan, J. Ma, M.P. Jahan, Sustainable Dry Machining of Additive Manufactured CFRP Composite – A Numerical Study, 7th International Forum on Sustainable Manufacturing, Lexington, KY on October 26th - 27th, 2022.

• David Orisekeh, Giancarlo Corti, M.P. Jahan, "Fabrication and Characterization of Eggshells Microparticles Reinforced Polylactic Acid Filaments for 3D Printing", The 2022 Graduate Research Forum, Friday, November 4, 2022, Amstrong Students Center, Miami University, Oxford, OH.

• Muhammad Abdun Nafi, M.P. Jahan, "Investigating wettability, corrosion, and cell adhesion performance of titanium alloy surface engineered by the wire electrical discharge machining (WEDM) process", The 2022 Graduate Research Forum, Friday, November 4, 2022, Amstrong Students Center, Miami University, Oxford, OH.

• Mahmud Karim, M.P. Jahan, "Investigating Novel Electrode Design Methodologies for Faster Slotting in Silicon using Die Sink EDM", The 2022 Graduate Research Forum, Friday, November 4, 2022, Amstrong Students Center, Miami University, Oxford, OH.

2021

• Mahmudul Hassan, J. Ma, M.P. Jahan, Numerical Investigation of Cutting Parameters During Slot Milling of Laminated Polymer Composite Reinforced with Carbon Fiber, The 2021 Graduate Research Forum, Friday, November 5, 2021, Amstrong Students Center, Miami University, Oxford, OH.

2019

• Christopher Goralka, Muhammad Jahan, Mark Sidebottom, Zhijiang Ye, Tribological Behaviors of Graphene-based Lubricant on Titanium Alloy (Ti-6Al-4V), 74th STLE Annual Meeting & Exhibition 2019, May 19-23, 2019, Nashville, TN, USA. (Poster presentation)

• Asif Rashid, Asma Perveen, Muhammad Jahan, Machining of Electrically Non-Conductive Ceramic Materials Using Electrical Discharge Machining Process, The 2019 Graduate Research Forum, Friday, November 1st, 2019, Shriver Center, Miami University, Oxford, OH.

• Nicholas Cococcetta, David Pearl, Muhammad Jahan, Investigating the effect of fiber orientation on the cutting forces, surface finish, and burr formation during machining of CFRP composite, The 2019 Graduate Research Forum, Friday, November 1st, 2019, Shriver Center, Miami University, Oxford, OH.

• Chong Liu, M. P. Jahan, Machining of Blind and Through Micro-holes in Metallic Glass by Micro-EDM, Miami University Undergraduate Research Forum, April 23-24, 2019, Oxford, Ohio.

• Craig Hanson, M. P. Jahan, Investigating The Delamination Wear Mechanisms in Machining of Ti-6Al-4V Using Coolant, Dry and Minimum Quantity Lubrication (MQL) Condition, Miami University Undergraduate Research Forum, April 23-24, 2019, Oxford, Ohio.

• Nicholas M. Cococcetta, David Pearl, Muhammad P. Jahan, “Investigating surface finish, burr formation and tool wear during machining of 3D printed CFRP composites”, 44th Dayton Cincinnati Aerospace Sciences Symposium (DCASS 2019), Dayton, Ohio, March 5th, 2019.

2018

• Rashef Mahbub, Roan Kirwin, Paul F. James, and Muhammad P. Jahan, A Study of Biocompatibility of Ti-6Al-4V Machined by Wire Electrical Discharge Machining Process, The 2018 Graduate Research Forum, Friday, November 9th, 2018, Shriver Center, Miami University, Oxford, OH.

• Roan Kirwin, and Muhammad P. Jahan, The influence of non-electrical parameters on Titanium during Wire Electro Discharge Machining, The 2018 Graduate Research Forum, Friday, November 9th, 2018, Shriver Center, Miami University, Oxford, OH.

• Chong Liu , Muhammad P. Jahan, Machining of High Aspect Ratio Micro-holes on Metallic Glass by Micro EDM Drilling, 14th Dayton Engineering Sciences Symposium - ASME Dayton Section, 30 October, 2018, Wright State University Student Union, Dayton, Ohio, USA.

• Roan Kirwin, Muhammad P. Jahan, Investigating the Effect of Wire Feed Rate, Wire Tension, and Surface Feed Rate on the Surface and Sub-surface Characteristics of Ti-6Al-4V Alloy, 14th Dayton Engineering Sciences Symposium - ASME Dayton Section, 30 October, 2018, Wright State University Student Union, Dayton, Ohio, USA.

• Rashef Mahbub, Roan Kirwin, Paul James, M. P. Jahan, Effect of Surface Topography and Sub-surface Microstructure of Wire Electric Discharge Machined Ti-6Al-4V on its Biocompatibility, 14th Dayton Engineering Sciences Symposium - ASME Dayton Section, 30 October, 2018, Wright State University Student Union, Dayton, Ohio, USA.

• Craig Hanson, Ashutosh Khatri, M. P. Jahan, Investigating Tool Wear Mechanisms in Machining of Ti-6Al-4V Using Coolant, Dry and Minimum Quantity Lubrication (MQL) Condition, 14th Dayton Engineering Sciences Symposium - ASME Dayton Section, 30 October, 2018, Wright State University Student Union, Dayton, Ohio, USA.

• Zhi Ge, Muhammad P. Jahan, Mert Bal, Francis Tonner, Larry Gardner, Investigating the Tensile Properties of 3D printed ABS and Carbon Fiber Reinforced ABS Polymer Composite, 13th Dayton Engineering Sciences Symposium - ASME Dayton Section, 30 October, 2018, Wright State University Student Union, Dayton, Ohio, USA.

• Ashutosh Khatri, Muhammad P. Jahan, Comparative study of chip morphology in dry, flood coolant and MQL machining of Ti-6Al-4V, 127th meeting of The Ohio Academy of Science, Bowling Green State University, Ohio, USA, Saturday, April 14th, 2018.

• Craig Hanson, Muhammad P. Jahan, Gregory K Arbuckle, Investigating Surface Finish and Burr Formation in Micro-Milling of Polycarbonate Glass, 127th meeting of The Ohio Academy of Science, Bowling Green State University, Ohio, USA, Saturday, April 14th, 2018.

2017

• Ashutosh Khatri, Muhammad P. Jahan, Investigating Effectivity of TiAlN tool Coating During End Milling of Ti-6Al-4V, 6th International Forum on Sustainable Manufacturing, Lexington, KY on December 7th - 8th, 2017 [Ashutosh received Honorable Mention in the Poster Competition].

• Muhammad P. Jahan, Investigating the Wear Mechanisms of Uncoated and TiAlN-coated Carbide Tools in Conventional Flood Coolant and Sustainable Dry and MQL Machining of Ti-6Al-4V, 6th International Forum on Sustainable Manufacturing, Lexington, KY on December 7th - 8th, 2017 [Invited Presentation, Awarded Emerging Researcher Travel Grant].

• Rashef Mahbub, Roan Kirwin, Paul F. James, and Muhammad P. Jahan, A Study of Biocompatibility of Ti-6Al-4V Machined by Wire Electrical Discharge Machining Process, The 2017 Graduate Research Forum, Friday, November 3rd, 2017, Shriver Center, Miami University, Oxford, OH.

• Ashutosh Khatri, and Muhammad P. Jahan, A Comparative Study of Tool Wear Mechanisms in Titanium Machining with Dry, Flood and MQL Conditions, The 2017 Graduate Research Forum, Friday, November 3rd, 2017, Shriver Center, Miami University, Oxford, OH.

• Roan Kirwin, Rashef Mahbub, and Muhammad P. Jahan, Investigating the Effect of Wire Feed Rate and Wire Tension on the Corner and Profile Accuracies During Wire-EDM of Ti-6Al-4V, 13th Dayton Engineering Sciences Symposium - ASME Dayton Section, 23 October, 2017, Wright State University Student Union, Dayton, Ohio, USA.

• Rashef Mahbub, Roan Kirwin, Paul F. James, and Muhammad P. Jahan, Investigating the Biocompatibility of the Ti-6Al-4V Surface Machined by Electrical Discharge Machining, 13th Dayton Engineering Sciences Symposium - ASME Dayton Section, 23 October, 2017, Wright State University Student Union, Dayton, Ohio, USA.

• Craig Hanson, and Muhammad P. Jahan, Gregory K Arbuckle, Investigating Micro Scale Machinability of Polycarbonate Glass,13th Dayton Engineering Sciences Symposium - ASME Dayton Section, 23 October, 2017, Wright State University Student Union, Dayton, Ohio, USA [Craig received Best Presentation Award].

• Ashutosh Khatri, and Muhammad P. Jahan, Investigating Tool Wear Mechanisms in Machining of Ti-6Al-4V Using Coolant, Dry and Minimum Quantity Lubrication (MQL) Conditions, 13th Dayton Engineering Sciences Symposium - ASME Dayton Section, 23 October, 2017, Wright State University Student Union, Dayton, Ohio, USA.

• M.P. Jahan, Farshid Alavi, Experimental Investigation and Statistical Analysis on the Effect of Operating Parameters on Surface Characteristics During Micro-EDM of Ti-6Al-4V, ASME's International Mechanical Engineering Congress and Exposition (IMECE 2017), Tampa, Florida, November 3 - 9, 2017.

• Craig Hanson, Muhammad Jahan, Investigating the tool wear and surface finish in machining of titanium alloy, Miami University Undergraduate Research Forum, April 26, 2017, Oxford, Ohio.

• Ann Rumsey, Muhammad Jahan, Micromachining of glass for microfluidic applications - A review, Miami University Undergraduate Research Forum, April 26, 2017, Oxford, Ohio.

• Ashutosh Khatri, Craig Hanson, Greg Arbuckle, Muhammad Jahan, Investigating the tool wear mechanisms in conventional flood coolant and sustainable dry machining of Ti-6Al-4V, 126th Annual Meeting of Ohio Academy of Science, April 8, 2017, Cincinnati, Ohio.

• M.P. Jahan, G.K. Arbuckle, Investigating the effectiveness of TiAlN coating on carbide tools during flood coolant and dry machining of aerospace material Ti-6Al-4V, 42nd Dayton-Cincinnati Aerospace Sciences Symposium, March 1, 2017. Dayton, Ohio.

2016

• Farshid Alavi, M.P. Jahan, Optimization of Process Parameters In Micro Electrical Discharge Machining of Ti-6Al-4V Alloy Based On Full Factorial Design, ASME Manufacturing Science and Engineering Conference (MSEC 2016), June 27 - July 1, 2016, Blacksburg, Virginia (Poster)

• M.P. Jahan, Greg Arbuckle, Investigating the cutting forces and temperatures generated during machining of Ti-6Al-4V using conventional flood coolant and sustainable dry machining, The Association of Technology, Management, and Applied Engineering (ATMAE) Annual Conference 2016, November 2 - 5, Orlando, Florida. (Presentation)

• Mark Doggett, M.P. Jahan, Perceptions of the Advanced Manufacturing Competency Model (AMCM) for Curriculum Development, 5th IAJC/ISAM Joint International Conference. September 25-27, 2016 - Orlando, Florida

• M.P. Jahan, Mark Doggett, A comparative study of the DOL Advanced Manufacturing Competency Model (AMCM) and the SME Four Pillars of Manufacturing Engineering Model (FPME), The Association of Technology, Management, and Applied Engineering (ATMAE) Annual Conference 2016, November 2 - 5, Orlando, Florida. (Presentation)

• Farshid Alavi, M.P. Jahan, The effects of micro-EDM process parameters and their optimal values to achieve the desired productivity and surface integrity, The Association of Technology, Management, and Applied Engineering (ATMAE) Annual Conference 2016, November 2 - 5, Orlando, Florida. (Presentation)

• Farshid Alavi, M.P. Jahan, Optimization of Process Parameters In Micro Electrical Discharge Machining of Ti-6Al-4V Alloy Based On Full Factorial Design, 46th Annual WKU Research Conference, Bowling Green, April 2nd, 2016 (Presentation) [Student received 1st prize for this presentation]

2015

• Jack Wassom, M.P. Jahan, Micro-EDM of Ti-6Al-4V with Focus on Surface Finish, ASME Manufacturing Science and Engineering Conference (MSEC 2015), June 8 - 12, 2015, Charlotte, North Carolina (Poster)

• Pegah Kakavand, M.P. Jahan, Comparison of Machined Surface after Micro-EDM of NiTi and Ti-6Al-4V, ASME Manufacturing Science and Engineering Conference (MSEC 2015), June 8 - 12, 2015, Charlotte, North Carolina (Poster) [Student received travel grants for presenting this poster]

• Bradley Logsdon, Pegah Kakavand, M.P. Jahan, Investigating the surface quality and its effect on biocompatibility during micro-electro-discharge machining of titanium alloys, The Association of Technology, Management, and Applied Engineering (ATMAE) Annual Conference 2015, November 11 - 14, Pittsburgh, Pennsylvania. (Presentation)

• Michael Harruff, M.P. Jahan, Gregory K. Arbuckle, Micro-milling Machinability of Aluminum, Copper and Brass, The Association of Technology, Management, and Applied Engineering (ATMAE) Annual Conference 2015, November 11 - 14, Pittsburgh, Pennsylvania. (Presentation)

• M.P. Jahan, Mark Doggett, Manufacturing and Non-Manufacturing Students’ Perceptions on the Applicability of the Four Pillars Competencies, The Association of Technology, Management, and Applied Engineering (ATMAE) Annual Conference 2015, November 11 - 14, Pittsburgh, Pennsylvania. (Presentation)

• M.P. Jahan, Current Nano Scale Manufacturing Processes and their Capabilities, The Association of Technology, Management, and Applied Engineering (ATMAE) Annual Conference 2015, November 11 - 14, Pittsburgh, Pennsylvania. (Presentation)

• Pegah Kakavand, M.P. Jahan, An experimental investigation into the micro-electro-discharge machining of NiTi shape memory alloy, 45th Annual WKU Research Conference, Bowling Green, March 28, 2015 (Presentation)

• Jack Wassom, M.P. Jahan, A study on the effect of operating parameters during the micro-electro-discharge machining of Ti-6Al-4V, 45th Annual WKU Research Conference, Bowling Green, March 28, 2015 (Presentation)

• Michael Harruff, M.P. Jahan, Gregory K. Arbuckle, Micro-structuring in copper, brass and aluminium using micro-milling process, 45th Annual WKU Research Conference, Bowling Green, March 28, 2015 (Presentation)

• Qinchuan Du, Pegah Kakavand, M.P. Jahan, Biomedical applications of Ti-6Al-4V – A review, 45th Annual WKU Research Conference, Bowling Green, March 28, 2015 (Presentation)

• Bradley Logsdon, Pegah Kakavand, M.P. Jahan, Biocompatibility of titanium alloys machined by electrical discharge machining – A review, 45th Annual WKU Research Conference, Bowling Green, March 28, 2015 (Presentation)

• Abdulhameed Dawood, M.P. Jahan, Gregory K. Arbuckle, Effect of tool coating during the sustainable machining of aerospace material Ti-6Al-4V, 45th Annual WKU Research Conference, Bowling Green, March 28, 2015 (Presentation)

• Jack Wassom, M.P. Jahan, An experimental investigation into the micro-electro-discharge machining of aerospace material Ti-6Al-4V, 13th Annual Posters-at-the-Capitol February 27, 2015, Murray State University, Murray, Kentucky (Poster)

2014

• Pegah Kakavand, Mychal-Drew Moses, M.P. Jahan, Investigating the machinability and challenges during micro scale electro-discharge machining of Titanium alloys, 100th Kentucky Academy of Science (KAS) Annual Meeting 2014, Lexington, Kentucky, November 14-16, 2014 (Presentation) [Student received 1st prize in the graduate research competition for this presentation]

• Pegah Kakavand, M.P. Jahan, Electro-discharge machining of shape memory alloy – A review, 100th Kentucky Academy of Science (KAS) Annual Meeting 2014, Lexington, Kentucky, November 14-16, 2014 (Presentation)

• Jack Wassom, M.P. Jahan, Study on the die-sinking micro-electro-discharge machining of Ti-6Al-4V with focus on surface quality of micro features, 100th Kentucky Academy of Science (KAS) Annual Meeting 2014, Lexington, Kentucky, November 14-16, 2014 (Presentation) [Student received 1st prize in the undergraduate research competition for this presentation]

• AbdulHameed Dawood, M.P. Jahan, G.K. Arbuckle, Investigating the effectiveness of ‘Titanium Carbo-Nitride’ and ‘Aluminium Titanium Nitride’ coatings on the carbide tool for dry machining of Ti-6Al-4V, 100th Kentucky Academy of Science (KAS) Annual Meeting 2014, Lexington, Kentucky, November 14-16, 2014 (Presentation) [Student received 3rd prize in the graduate research competition for this presentation]

• AbdulHameed Dawood, M.P. Jahan, G.K. Arbuckle,  A Comparative Study on the Performance of Coated and Uncoated Tungsten Carbide Cutting Tool for Dry and Wet Machining of Titanium Alloy (Ti-6Al-4V), The Association of Technology, Management, and Applied Engineering (ATMAE) Conference 2014, November 19 - 21, Saint Louis, Missouri. 

• M.P. Jahan, G.K. Arbuckle, A Comparative Study of the Micro-milling Machinability of Aluminum, Copper and Brass Using Coated and Uncoated Tungsten Carbide Tool, The Association of Technology, Management, and Applied Engineering (ATMAE) Conference 2014, November 19 - 21, Saint Louis, Missouri.

• Mychal-Drew Moses, M.P. Jahan,  A Comparative Study on the Micro-Electro-Discharge Machining of Soft Brass and Difficult-to-cut Titanium Alloy (Ti-6Al-4V), The Association of Technology, Management, and Applied Engineering (ATMAE) Conference 2014, November 19 - 21, Saint Louis, Missouri.

• Mychal-Drew Moses, M.P. Jahan, Fabrication Of Quality Micro-features Using Micro Scale Electrical Discharge Machining, 44th Annual WKU Research Conference, Bowling Green, March 22, 2014.

• AbdulHameed Dawood, M.P. Jahan, G.K. Arbuckle, A Comparative Study Of Conventional And Sustainable Machining Of Titanium Alloy, 44th Annual WKU Research Conference, Bowling Green, March 22, 2014.

2013

• Mychal-Drew Moses, M.P. Jahan, Fabrication and characterization of blind and through micro-holes in brass using micro scale electrical discharge machining (micro-EDM), 99 th Kentucky Academy of Science (KAS) Annual Meeting 2013, Morehead, Kentucky, November 8-9, 2013  [Student received 3rd prize in the graduate research competition for this presentation]

• B. D. Staves, M.P. Jahan, G.K. Arbuckle, A Comparative Study on the Micro-Turning of Copper, Brass, and Aluminum, The Association of Technology, Management, and Applied Engineering (ATMAE) Conference 2013, November 21 - 23, New Orleans, Louisiana. 

• D.T. Puckett, G.K. Arbuckle, M.P. Jahan,  Identification of Optimal Cutting Parameters in Micro Milling Of OFHC (Oxygen Free High Conductivity) Copper to Produce Micro Channels, The Association of Technology, Management, and Applied Engineering (ATMAE) Conference 2013, November 21 - 23, New Orleans, Louisiana.

• A.J. Austin, G.K. Arbuckle, M.P. Jahan, Improving Process Capability in a Computer Integrated Manufacturing (CIM) Cell with the Use of a Renishaw 40-2 Spindle Probe, The Association of Technology, Management, and Applied Engineering (ATMAE) Conference 2013, November 21 - 23, New Orleans, Louisiana.  

• M.P. Jahan, G. K. Arbuckle, A Comparative Study on the Machinability of Titanium Alloy (Ti-6Al-4V) Using Conventional Flood Coolant and Minimum Quantity Lubrication (MQL),  The Association of Technology, Management, and Applied Engineering (ATMAE) Conference 2013, November 21 - 23, New Orleans, Louisiana.  

• M.P. Jahan, A. Perveen, M. Rahman, Y.S. Wong, Integrating Micro-Electro-Discharge Machining with Conventional Micromachining: Development of Innovative Hybrid Microfabrication Techniques,The Association of Technology, Management, and Applied Engineering (ATMAE) Conference 2013, November 21 - 23, New Orleans, Louisiana. 

• M.P. Jahan, K.P. Rajurkar, A.P. Malshe, Scanning Tunneling Microscopy (STM) as a Tool for Nano-Fabrication, The Association of Technology, Management, and Applied Engineering (ATMAE) Conference 2013, November 21 - 23, New Orleans, Louisiana.

2012

• Wenyang Zhang, M. P. Jahan, and Ajay P. Malshe, Study of the Chemical States of Friction Polymer Based Tribo-chemical Lubricant Film, to be submitted in International Joint Tribology Conference IJTC-2012, Oct 8 -10, 2012 in Denver, Colorado.

2011

• M.P. Jahan and Ajay P Malshe, APPLICATION OF SCANNING TUNNELING MICROSCOPY (STM)  FOR NANOSCALE ELECTROMACHINING IN AIR, Seeing at the Nanoscale International Conference, July 20-July 22, Santa Barbara, California, USA, 2011.

• M.P. Jahan and Ajay P Malshe, FABRICATION, OPTIMIZATION AND CHARACTERIZATION OF TUNGSTEN TIPS FOR SCANNING TUNNELING MICROSCOPY (STM) APPLICATIONS, Seeing at the Nanoscale International Conference, July 20-July 22, Santa Barbara, California, USA, 2011.