Universal Remote

Steps:

* Install RemoteMaster (Requires Java). Note: RDF files now automatically installed.

* Connect universal remote to PC using "JPX Flash" cable. This is a 6-pin JP1 to USB. The first time you connect it will download a driver.

* Start RMIR software on computer.

* From the menu bar select "Remote" then "Download from Remote". Green light on JPX Flash cable will flash.

* Then from the menu bar do "File" then "Save As" to make a backup of your remote's original configuration.

* Repeat the above step and save a different image that you will use for your modified remote.

* Select the "Learned Signals" tab.

* Click on the "New" button.

* Next under "Bound Key" select the remote button you will use.

* Then copy/paste the desired "UEI" code from below into the "Signal Data" text box.

* Then click "Apply", then "Ok".

* Repeat for all the codes you want to include.

* When done do "File"->"Save".

* Now you can upload the new bindings to the remote by selecting "Remote" from the menu-bar and then "Upload to Remote".

==NOTE== On uploading you will often get an error. What is happening is it is getting the codes in the order you put them in, but not all of them.

* I tried over and over until I got most of the codes to load.

* You can test your remote while still connected to the computer.

UEI Codes for "Glow with the Show" Ears: