Ubuntu 26.10 introduces hardware backed encryption only available during install. It will erase the entire disk. I thought the only thing that would not be encrypted would be the EFI partition but it actually uses a clear boot partition.... well the installer certainly doesn't make that clear. it shows all partitions as ext4 and vfat. A.I. says the partitions will be encrypted so we'll see i guess. It will hash the boot and efi?
IT DOESN'T WORK. The TPM unlock process is messed up and seems that almost no one can make this work.
Things to note
features delivered via snaps rather than apt/deb
uses UKI
stripped down grub
still uses clear boot partition but validates with secure boot
erases entire hard drive and lays out non standard partition schema
not compatible with multi-boot
uses grub to be able to recover older kernels.
registers shim and grub in UEFI instead of individual binaries
does not allow for custom initrd and kernel. only boots signed uki from ubuntu
26.10 release article mentions widening support for systems without compatible hardware for secure boot and full disk encryption.
Well at least this option finally works. I re-installed Ubuntu with the old school encryption setup and it actually boots. yay me. This does not use UKI out of the box so I'll add it myself. I'll also try it with kubuntu since they use different installers.
Number Start End Size File system Name Flags mount
1 1049kB 1128MB 1127MB fat32 boot, esp /boot/efi
2 1128MB 3276MB 2147MB ext4 /boot
3 3276MB 256GB 253GB luks+lvm /
The touchscreen sensitivity is really low. I have to press really hard to activate it. Here is what I did to make it more responsive.
# 1. Ensure the libinput configuration directory exists
sudo mkdir -p /etc/libinput
# 2. Write the sensitivity override directly to the quirks file
sudo tee /etc/libinput/local-overrides.quirks > /dev/null << 'EOF'
[ELAN Touchscreen Sensitivity Fix]
MatchVendor=0x04F3
MatchProduct=0x320B
AttrSizeHint=2:2
EOF
# 3. Compile the new hardware database and apply changes immediately
sudo systemd-hwdb update
sudo udevadm trigger
echo "Touchscreen sensitivity fix applied successfully!"