Reports
FBR REPORTS
FBTR Service Water Corrosivity by Coupon Method, Smt. Sofia, T.Nanda Kumar, A. Ravi Shankar Anne, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2024/489, dt.10.04.2024
Measurement of anodized coating thickness of aluminum used for aluminum work and fixing of Concertina Coil, G.I fencing and other miscellaneous work at DFRP in IGCAR, Kalpakkam, R. Selvam, T.Nanda Kumar, A. Ravi Shankar Anne, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2024/487, dt.13.03.2024
Measurement of anodized coating thickness of aluminum used for fabricating and erection of MS structural work and other civil works in FBTR entrance arch area IGCAR, Kalpakkam, R. Selvam, T.Nanda Kumar, A. Ravi Shankar Anne, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2024/486, dt.13.03.2024
Enumeration of bacterial groups present on carbon steel specimens exposed to cooling water flowing through sample rack positioned at the inlet of cooling tower of FBTR, IGCAR, Kalpakkam, R. Selvam, B. Anand Kumar, A. Ravi Shankar Anne, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2023/485, dt.13.03.2024
FBTR Service Water Corrosivity by Coupon Method, T.Nanda Kumar, A. Ravi Shankar Anne, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2024/484, dt.07.03.2024.
Microbial analysis on water samples from raw water reservoir located near the desalination plant of IGCAR, R. Selvam, B. Anand Kumar, A. Ravi Shankar Anne, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2023/482, dt.05.03.2024
Microbial Analysis on Water Samples of Cooling Water System of FBTR, R. Selvam, B. Anand Kumar, A. Ravi Shankar Anne, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2023/481, dt.05.03.2024
Anaysis of residue collected from permanent magnet devices in the main vessel of PFBR exposed to liquid sodium, NGK, T.Nanda Kumar, A. Ravi Shankar Anne, M. Nirmala Sundaran, S.Ningshen, Jose Varghese, J.Philip, IGCAR/MMG/MCG/CSTD/2024/480, dt.27.02.2024.
Non-destructive inspection of IHX-1 tubes of PFBR, V.Arjun, G.M.S.K.Chaitanya, W.Sharatchandra Singh, B.Sasi, Tikesh Kumar Sahu, G.V.K.Kishore, A.Viswanath, S.Thirunavukkarasu, K.V.Rajkumar, Anish Kumar, J.Philip, R.Divakar, PFBR/MMG/MCG/NDED/32130/DN/1155/Rev.dt:05.02.2024
Measurement of anodized coating thickness of aluminum used for the work of “Providing false ceiling, aluminum partition and other modification work in RCL at IGCAR, Kalpakkam” R. Selvam, T.Nanda Kumar, A. Ravi Shankar Anne, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2024/477, dt.06.02.2024
Measurement of anodized coating thickness of aluminum used for the retrofitting works in supply fan room at Steam Generator building in FBTR complex, IGCAR, Klpakkam, R. Selvam, T.Nanda Kumar, A. Ravi Shankar Anne, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2023/476, dt.19.12.2023
Measurement of anodized coating thickness of aluminum used for the construction of Sastra analytical lab building at IGCAR, Kalpakkam., R. Selvam, T.Nanda Kumar, A. Ravi Shankar Anne, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2023/475, dt.13.12.2023
Report on Brazing of DSRDM component, Yogesh Kumar, Ravi Kumar Sole, E. Vetrivendan, S.Ningshen, J.Philip, R. Divakar, IGCAR/MMG/CSTD/2023/474, dt.07.12.02023
Measurement of anodizing aluminum thickness used for the modification works in Tool crip, CNC, and First-floor office room at Zonal workshop building at IGCAR, Kalpakkam, R. Selvam, T.Nanda Kumar, A. Ravi Shankar Anne, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2023/473, dt.17.11.2023
Report on Plasma Sprayed Yttria Coatings over Cathode Processing High-Density Graphite Crucible, Yogesh Kumar, Ravi Kumar Sole, E. Vetrivendan, S.Ningshen, J.Philip, R. Divakar IGCAR/MMG/CSTD/2023/472, dt.15.11.2023
Measurement of aluminum anodizing thickness used for the construction of Sastra Analytical Lab building at IGCAR, R. Selvam, T.Nanda Kumar, A. Ravi Shankar Anne, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2023/471, dt.03.11.2023
Qualification of GFRP Lining on SS304L for Irradiation Resistance, E. Vetrivendan, Ramani Yuvaraj, B. Anoop, S.Ningshen, J.Philip, R. Divakar, IGCAR/MMG/MCG/ CSTD/2023/470, dt.31.10.2023
Report on Plasma Sprayed Yttria Coatings over High-Density Graphite for Uranium Melting Applications, Yogesh Kumar, Ravi Kumar Sole, E. Vetrivendan, S.Ningshen, J.Philip, IGCAR/MMG/CSTD/2023/469, dt.31.10.2023
Root Cause Analysis of Leak in BSC System, Faizan UllaKhan, E. Vetrivendan, V. Mohan Murali Sagar, Rajendraprasad Ponnada, S.Ningshen, Anish Kumar, D.Balaji, Y.S. Ramaswamy, J Philip, A. Ananth, R. Divakar, K. Dinesh, B. Venkatraman, PFBR/38000/DN/1018/Rev. 1, dt.15.09.2023
Non – destructive inspection of IHX-2 tubes in BHAVINI, V. Arjun, G. V. K. Kishore, G. M. S. K. Chaitanya, W. Sharatchandra Singh, A. Viswanath, B. Sasi, S. Thirunavukkarasu, K. V. Rajkumar, AnishKumar, J. Philip, R. Divakar, PFBR/32130/DN/1153/Rev., dt. 17.10.2023.
Heat Treatment of Type 630 Material (17-4 PH Steel) as per ASTM A564 - H1025 Condition For Failed Fuel Location Module Pins PFBR, R. Priya, K.Kaliraj, G. K. CHAITANYA, T.PANCHACHARAM, S. Ningshen, J.Philip, R. Divakar, IGCAR/MMG/MCG/CSTD/2023/459, dt.26.06.202
Corrosion analysis of 316LN SS dished ends exposed to sodium in air ambiance at room temperature for 65 days, NGK, T. Nandakumar, A. Ravi Shankar, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2023/458, dt.26.06.2023
Analysis of the debris collected from main vessel hot and cold pool regions of PFBR, T. Nandakumar, NGK, A. Ravi Shankar, Gagan Gupta, Sriramachandra Aithal, S. Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2023/456, dt.26.06.2023
Corrosion Evaluation of Secondary Sodium Structural Materials Exposed to Ternary Eutectic Chloride Fire Extinguisher Powder, E.Vetrivendan, S. Ravi Shankar, R. Priya, S. Ningshen, S. Chandramouli, J.Philip, IGCAR/MMG/MCG/CSTD/2023/450, dt.16.05.2023.
Temperature Correlation Between Resistance Measurement And Thermographical Estimation of Indium Tin Oxide Thin Films, I. Lakshmi Kandhan, A. Sree Rama Murthy, K. I. Gnanasekar, Rajesh Ganesan, V. Jayaraman, N.Sivaraman, S.BagavathiAppan, Govid Kumar Sharma, S.Mahadevan, Anish Kumar, J Philip, R.Divakar, IGC/MC&MFCG/MMG/NCSS/ITS/PI/01/Rev.A, dt: 19.09.2023
Fireside side corrosion evaluation of 10000H sample, E.Vetrivendan, Dhirenda Kumar, Anand Varma, S. Ningshen, M.Mahesh Kumar, J.Philip, M.Swamy, A.K.Das, R.Divakar, V.V. Subrahmanyam, A.K.Das, IGCAR-AUSC-TD-41/00, dt.05.04.2023
Streamside side corrosion evaluation of 10000H sample, E.Vetrivendan, Dhirenda Kumar, Anand Varma, S. Ningshen, M.Mahesh Kumar, J.Philip, M.Swamy, A.K.Das, R.Divakar, V.V. Subrahmanyam, A.K.Das, IGCAR-AUSC-TD-42/00, dt.05.04.2023
Measurement of anodizing thickness of aluminum samples used for the construction of RCL annex building First Floor extension at IGCAR, Kalpakkam, R. Selvam, T.Nanda Kumar, A. Ravi Shankar Anne, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2023/448, dt.05.04.2023
Measurement of Coating Thickness of GI on S.S concertina coil & barbed tape sample for fencing of plant site boundary wall Tsunami wall DAE plant site, Kalpakkam, P.Sundari, T.Nanda Kumar, A. Ravi Shankar Anne, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2023/447, dt.22.03.23
Effect of cleaning solution temperature and flow rate on P91 cleaning efficacy using PFBR formulation for Steam Generator Tubes, T.Nanda Kumar, Namrata Upadhyay, A. Ravi Shankar Anne, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2023/446, dt.27.02.202
Analysis of sodium products collected from the main vessel cold pool region of PFBR, N.G. Krishna, E. Vetrivendan, T.Nanda Kumar, A. Ravi Shankar Anne, S.Ningshen, J.Philip, Divakar Ramachandran IGCAR/MMG/MCG/CSTD/2023/445, dt.27.02.202
Measurement of Coating Thickness of GI on chain link fencing above plant site boundary wall and Tsunami wall, Kalpakkam, P.Sundari, T.Nanda Kumar, A. Ravi Shankar Anne, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2023/443, dt.22.02.2023
Fireside side corrosion evaluation of 10000H sample, E.Vetrivendan, S. Ningshen, J.Philip, R.Divakar, IGCAR-AUSC-TD-41/00, dt.16.02.2023
Streamside side corrosion evaluation of 10000H sample, E.Vetrivendan, S. Ningshen, J.Philip, R.Divakar, IGCAR-AUSC-TD-42/00, dt.16.02.2023
Analysis of debris from the shielding sleeve of transfer arm of PFBR, Nanda Gopala Krishna, A. Ravi Shankar Anne, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2022/440, dt.09.01.2023
Intergranular Corrosion Test (ASTM 262 Practice E) of SS 304 L Specimen, M. Jayalakshmi, V.N.Sakthivelrajan, A.Poonguzhali, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2023/439, dt.02.01.2023.
Thermophysical properties of CB2 cast steel, Haraprasanna Tripathy, R. Sundar, C. Sudha, Arup Dasgupta, J. Philip, R. Divakar, IGCAR-AUSC-TD-43/00, dt. 26.10.2023
Measurement of aluminum anodizing thickness used for the construction of Sastra Analytical Lab building at IGCAR, R. Selvam, T.Nanda Kumar, A. Ravi Shankar Anne, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2023/468, dt.20.10.2023
Measurement of anodizing thickness of aluminum samples used for the Annual maintenance including repairs and renovation of Aluminium door & windows, providing partitions in various laboratory and office buildings in IGCAR for the year 2023-2024, R. Selvam, T.Nanda Kumar, A. Ravi Shankar Anne, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2023/467, dt.12.10.2023
Measurement of power coating thickness on aluminum samples used for the roof shelter for battery, chiller, and UPS platform for MMG-IFRRM building in IGCAR North plant site at Kalpakkam, R. Selvam, T.Nanda Kumar, A.Ravi Shankar Anne, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2023/466, dt.11.10.2023
Measurement of anodizing thickness of aluminum samples used for the construction of Gamma Irradiation Facility at IGCAR, Kalpakkam, R. Selvam, T.Nanda Kumar, A. Ravi Shankar Anne, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2023/463, dt.21.09.2023
Measurement of anodizing thickness of aluminum samples used for the construction of Mid-tropospheric radar at IGCAR, Kalpakkam, R. Selvam, T.Nanda Kumar, A. Ravi Shankar Anne, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2023/461, dt.18.08.2023
Measurement of anodizing thickness of aluminum samples used for the construction of RCL annex building First Floor extension at IGCAR, Kalpakkam, R. Selvam, T.Nanda Kumar, A. Ravi Shankar Anne, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2023/460, dt..12.07.2023.
Fire order for corrosion science and Technology Division, Materials Characterization Group, T.Nanda Kumar, R.K.Sole, A. Ravi Shankar Anne, S. Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2023/455, dt.19.06.2023
Failure analysis of the Helium Circulating Tank of Unit#2, MAPS-2, G.V.K. Kishore, A. Viswanath, K.V. Rajkumar, Vani Shankar, Anish Kumar, J.Philip, R. Divakar, IGC/NDED/UMS/MAPS/In-situ/2023/03, dt.30.05.2023.
Measurement of Coating Thickness of GI on chain link fencing wire for the construction of DG room and infrastructure works in Doppler weather radar building in KKM gate at IGCAR, Kalpakkam, P.Sundari, T.Nanda Kumar, A. Ravi Shankar Anne, S.Ningshen, IGCAR/MMG/MCG/CSTD/2023/438, dt.04.01.2023
Corrosion analysis of type 316L SS exposed to sodium in air for 550h, T.Nanda Kumar, A. Ravi Shankar Anne, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2022/437, dt.02.01.2023.
Measurement of Coating Thickness of GI on chain link fencing wire around Terminal building, near KKM gate at IGCAR, Kalpakkam, P.Sundari, T.Nanda Kumar, A. Ravi Shankar Anne, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2022/436, dt.27.12.2022.
Measurement of Coating Thickness of GI on chain link fencing wire around Terminal building, near KKM gate at IGCAR, Kalpakkam, P.Sundari, T.Nanda Kumar, A. Ravi Shankar Anne, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2022/435, dt.06.12.2022
Analysis of water samples collected from SS tank of RML, R. Selvam, B. Anandkumar, A. Ravi Shankar, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2022/434, dt.30.11.2022
Measurement of Coating Thickness of GI on chain link fencing wire around Terminal building, KKM gate at IGCAR, Kalpakkam, P.Sundari, T.Nanda Kumar, A. Ravi Shankar Anne, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2022/432, dt.11.11.2022
Measurement of Coating Thickness on GI bolts used for construction of utility duct phase-III around North plant site in IGCAR, Kalpakkam, P.Sundari, T.Nanda Kumar, A.Ravi Shankar, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2022/430, dt.07.10.2022
Measurement of anodizing thickness of aluminum samples used for the construction at Doppler weather radar site, IGCAR, R.Selvam, T.Nanda Kumar, A.Ravi Shankar, J.Philip, IGCAR/MMG/MCEG/CSTD/2022/429, dt.19.09.2022
Solution Annealing Atmosphere for Austenitic Stainless Steel Helical Compression Spring Wire used in PFBR, Ravi Shankar Anne, J.Philip, PFBR/31100/SP/1124/Rev/A, dt.07.09.2022
Intergranular Corrosion Test (ASTM 262 Practice A and C) and crack morphology studies of DFRP 304L SS, R.Priya, K.Kaliraj, S.Ningshen, J.Philip, IGCAR/MMG/CSTD/2022/428, dt.01.09.2022
Corrosion Assessment of Stain Marks on Grid Plate in BHAVINI and its Implications, Ravi Shankar Anne, J.Philip, PFBR/31210/TR/1054/Rev/A, dt.18.08.2022
Intergranular Corrosion Test (ASTM 262 Practice A and C) Report of DFRP 304L SS Pipe, R.Priya, K. Kaliraj, S. Ningshen, J. Philip, IGCAR/MMG/CSTD/2022/427 dt.10.08.2022.
Root Cause Analysis of Leakage in Liquid Effluent Storage Tanks PFBR, E.Vetrivendan, B. Anoop, P.M.Rahul, B. Sudha, P. Karnan, G.Ramesh, S. Manoj Kannan, K.V. Rajkumar, S. Ninghen, Anish Kumar, J. Philip, R. Divakar, S.Raju, A. Jyothishkumar, S.Raghupathy, PFBR/37200/DN/1031/Rev/0, dt.10.06.2022
Corrosion Re-Investigation on Failed Biological Shiels Cooling Piping of PFBR, E. Vetrivendan, Faizan Ulla Khan, S.Ninghen, J.Philip, Tanmay Vasal, R.Divakar, S.Raghupathy, IGCAR/MMG/MCG/CSTD/2022/426 dt.12.07.2022
Analysis of Corrosion Products of Service Water Carbon Steel Pipes of FBTR, B. Anandkumar, C.Thinaharan, T. Nandakumar, A. Ravi Shankar, J. Philip, R. Divakar, IGCAR/MMG/CSTD/2022/425 dt.07.07.202
Prototype Fast Breeder Reactor Report: Root Cause Analysis of Leakage in Liquid Effluent Storage Tanks, E. Vetrivendan, B. Anoop, P.M. Rahul, B. Sudha, P. Karnan, G. Ramesh, S. Manoj Kannan, K. V. Rajkumar, S. Ningshen, Anish Kumar, J. Philip, R. Divakar, S. Raju, A. Jyothish Kumar, S. Raghupathy, PFBR/37200/DN/1031/Rev/0 dt. 30.05.2022 (BHAVINI/RDTG)
Intergranular Corrosion Test (ASTM 262 Practice C) Report of 3mm thick SS 304 L Specimen Gopinath Shit, A. Poonguzhali, S. Ningshen, J. Philip, IGCAR/MMG/ CSTD/2022/424 dt. 03.06.2022(QAD, SQRMG)
Intergranular Corrosion Test (ASTM 262 Practice C) report of Type 304L SS in boiling nitric acid medium K. Kaliraj, Avinash Kumar, R. Priya, S. Ningshen, J. Philip, IGCAR/MMG/CSTD/2022/423 dt. 03.06.2022 (QAD, SQRMG)
Intergranular Corrosion Test (ASTM 262 Practice E) of SS 304 LN specimen, M. Jayalakshmi, V.N. Sakthivelrajan, A. Poonguzhali, S. Ningshen, J. Philip, IGCAR/MMG/CSTD/2022/422 dt.22.04.2022(RDTG)
Measurement of Coating Thickness of Epoxy Paint on Roof Sheet Sample; P. Sundari, T. Nandakumar, Nanda Gopala Krishna, J. Philip IGCAR/MMG/CSTD/2022/421 dt.22.02.2022 (CEG)
Intergranular Corrosion Test (ASTM 262 Practice C) Report of DFRP Material Type 304 L SS Bar (30 mm dia), Kaliraj, R.Priya, S.Ningshen, J.Philip, IGCAR/MMG/CSTD/2022/420, dt.03.02.2022
Measurement of Anodizing thickness of Aluminium samples used for the construction of AUSC Lab, R.Selvam, T.Nandakumar, B.Anandkumar, J.Philip, IGCAR/MMG/CSTD/2022/419, dt.11.01.2022
Measurement of Coating Thickness on GI Fence Wire for CWCP yard and CWCP canteen, R.Selvam, T.Nandakumar, B.Anandkumar, J.Philip, IGCAR/MMG/CSTD/2021/418, dt.29.12.2021
Corrosion Analysis of Carbon Steel Pipes of Firewater System of PFBR, B.Anandkumar, T.Nandakumar, M.Ravi, A.Ravi Shankar, J.Philip, Faizan Ullah Khan, Tanmay Vasal, S.Raju & S.Raghupathy, IGCAR/MMG/CSTD-RDTG/2021/417, dt.06.12.2021
Measurement of Coating Thickness on GI Fence Wire of Additional Helipad near KKM Gate, P.Sundari, T.Nandakumar, A.Ravi Shankar, J.Philip, IGCAR/MMG/CSTD/2021/416, dt.30.11.2021
Intergranular Corrosion Test (ASTM 262 Practice C) Report of DFRP Material Type 304 L SS Bar, K. Kaliraj, R.Priya, S.Ningshen, J.Philip, IGCAR/MMG/CSTD/2021/415, dt.21.10.2021
Technical Specifications for the Electrically Insulating Ceramic Alumina coating in components of DC conduction Pump of FFLM, R.Krishnan, E.Vetrivendan, M.Nimala Sundaram, S.Ningshen, Tom Mathews, J.Philip, Jose Varghese, S.Raju, S.Raghupathy, PFBR/31420/SP/1014/Rev.1, dt. 04.10.2021
Specifications for Procedural qualification of Alumina Coatings on components of DC Conduction Pump, E.Vetrivendan, R.Krishnan, M.Nimala Sundaran, S.Ningshen, Tom Mathews, J.Philip, Jose Varghese, S.Raju, S.Raghupathy, PFBR/31420/SP/1101/Rev.00, dt. 04.10.2021
Report on Plasma Sprayed Yttria stabilized Zirconia coatings over SS430 rods for Electrorefining process, Avinash Kumar, Yogesh Kumar, Ch.Jagadeeshwara Rao, S.Ningshen, J.Philip, IGCAR/MMG/CSTD/2021/414, dt.11.10.2021.
Evaluation of Stress corrosion cracking resistance of 304L SS joined by gas tungsten ARC Welding and flux-cored Arc welding, SivaiBharasi, A.RaviShankar, J.Philip, IGCAR/MMG/MCG/CSTD/2021/413 dt.15.07.2021. (Version-1)
Pitting corrosion evaluation of 304L SS joined by gas tungsten ARC Welding and flux-cored Arc welding, T.Nandakumar, A.Ravi Shankar, J.Philip, IGCAR/MMG/MCG/CSTD/2021/412, dt.01.07.2021.(Version-1)
Intergranular Corrosion Test Report on 316LN SS for Anti Convection Barrier (ACB) Plug-in PFBR, T.Nandakumar, Ravi Shankar, Rani.P.George, J.Philip, IGCAR/MMG/MCG/CSTD/2021/411, dt.10.05. 2021.
Intergranular Corrosion Test report, Kaliraj, R.Priya, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2021/410, dt.08.06.2021.
High-Temperature Corrosion Studies on Zinc and Manganese Phosphate Coated Carbon Steel Baffle Plate of Heater Vessel in the Hot Argon Supply System of Inclined Fuel Transfer Machine of PFBR, C.Thinaharan, T.Nandakumar, Anu Krishnan, A.RaviShankar, Rani.P.George, J.Philip, Jose Varghese, S.Raju, Shaju.K.Albert, Raghupathy.S, PFBR/35240/DN/1110/Rev.A, dt.06.05.2021.
Removal of Magnetite Depositson Modified 9Cr-1Mo Steel using mini Chemical Cleaning Loop, Namrata Upadhyay, T.Nandakumar, Ravi Shankar Anne, Rani.P.George, J.Philip, IGCAR/MMG/MCG/CSTD/2021/409, dt. 16.03.2021.
Report on Plasma Sprayed Yttria Coatings over High-Density Graphite for Uranium Melting, E. Vetrivendan, Ravikumar Sole, Yogesh Kumar, S.Ningshen, J.Philip, S.Raju, Shaju.K.Albert, IGCAR/ MMG/CSTD/2021/408, dt.12.03.2021.
Corrosive failure analysis of Biological Shield Cooling piping of BHAVINI, E.Vetrivendan, B.Anand Kumar, Ningshen, R.P.George, J.Philip, S.Raju, Shaju.K.Albert, IGCAR/MMG/MCG/CSTD/2021/407, dt.17.03.2021. (Version-1)
High-Temperature Corrosion Studies on Zinc and Manganese Phosphate Coated Carbon Steel Baffle Plate of Heater Vessel in the Hot Argon Supply System of Inclined Fuel Transfer Machine of PFBR, C.Thinaharan, T.Nanda Kumar, A.Ravi Shankar, R.P.George, J.Philip, S.Raju, Shaju.K.Albert, IGCAR/MMG/MCG/CSTD/2021/406, dt.18.03.2021. (Version-1)
Oxidation Studies on Carbon Steel to Simulate Accidental Ingression of Air in the Hot Argon Supply System (HASS) to Inclined Fuel Transfer Machine for PFBR, T.Nanda Kumar, C.Thinaharan, A.Ravi Shankar, R.P.George, J.Philip, IGCAR/MMG/MCG/CSTD/2021/405, dt.05.03.2021. (Version-1)
Design, Fabrication, Commissioning, and Testing of a Mini Chemical Cleaning Loop and
Development of Effective Post Fabrication Cleaning Procedure for Steam Generator Tubes, Namrata Upadhyay, T.Nandakumar, Ravishankar, Rani.P.George, J.Philip, S.Raju, Shaju.K.Albert, IGCAR/MMG/MCG/CSTD/2021/404, dt. 09.03.2021. (Version-1)
Report on Pyrolytic graphite coating on U melting HDG Crucible for MFPD, E.Vetrivendan, Ravikumar Sole, Yogesh Kumar, S.Ningshen, J.Philip, IGCAR/MMG/CSTD/2021/403, dt.03.03.2021.
Measurement of Zinc Coating Thickness on Chain Link Fence Wire, P.Sundari, T.Nandakumar, A.Ravi Shankar, Rani.P.George, J.Philip, IGCAR/MMG/MCG/CSTD/2021/402, dt. 26.02.2021.
Report on corrosion assessment and painting specification of components at air force detachment unit, Namrata Upadhyay, Rani.P.George, J.Philip, IGCAR/MMG/CSTD/2021/401, dt.29.01.2021.
Responses to the NPSD/AERB observations of the report on oxidation studies of SS 316LN and SS 304LN in a nitrogen atmosphere with oxygen and moisture impurities, Ch.Jagadeeswara Rao, S.Ningshen, J.Philip, IGCAR/MMG/CSTD/2021/400, dt.04.01.2021. (Version-1)
Interim Report on Investigation on Deposit Collected from Bulk Oil Storage Tank (BOST), E.Vetrivendan, A.Ravi Shankar, B.Anandkumar, J.Philip, IGCAR/MMG/CSTD/2020/399, dt.30.12.2020.
Measurement of Coating Thickness on GI fence wire, P.Sundari, T.Nanda Kumar, A.Ravi Shankar, Rani.P.George, J.Philip, IGCAR/MMG/MCG/CSTD/2020/398, dt.05.12.2020.
Measurement of Coating Thickness on GI fence wire, P.Sundari, T.NandaKumar, A.Ravi Shankar, Rani.P.George, J.Philip, IGCAR/MMG/MCG/CSTD/2020/397, dt.04.11.2020.
Report on Pyrolytic Graphite Coating on U Melting HDG Crucible for MFPD, E.Vetrivendan, R.K.Sole, Yogesh Kumar, S.Ningshen, J.Philip, IGCAR/MMG/CSTD/2020/396, dt.27.10.2020.
Report on Pyrolytic Graphite Coating on Ingot Mould of Cathode Distillation for PPRDF, E.Vetrivendan, Ravi Kumar Sole, Yogesh Kumar, Ningshen, J.Philip, IGCAR/MMG/CSTD/2020/395, dt.26.10.2020.
Measurement of Coating Thickness on GI fence wire, P.Sundari, T.NandaKumar, A.Ravi Shankar, Rani.P.George, J.Philip, IGCAR/MMG/MCG/CSTD/2020/394, dt.21.10.2020.
The corrosion rate of 9Cr-1Mo steel and its weldments in different environments and temperatures, M.Archana, Ch.J.Rao, Ningshen, J.Philip, IGCAR/MMG/CSTD/2020/393, dt.08.10.2020.
Corrosion assessment of pipelines and components of the chilling water plant, A.Ravi Shankar, B.Anandkumar, R.P.George, J.Philip, IGCAR/MMG/MCG/CSTD/2020/392, dt.07.10.2020. (Version-1)
Corrosion Assessment Repainting Recommendations for Nitrogen Storage Horton Spheres, E.Vetrivendan, S.Ningshen, J.Philip, S.Raju, Shaju.K.Albert, IGCAR/MMG/CSTD/2020/391, dt.21.08. 2020.
Recommendation on Chrome Plating procedure proposed by M/s SHIV Engineering, Ravi Shankar, C.Thinaharan, R.P.George, J.Philip, IGCAR/MMG/MCG/CSTD/2020/390, dt.24.06.2020.
Nitric acid test of Titanium Dissolver material (Ti-Gr2), R.Priya, Avinash Kumar, K.Kaliraj, S.Vijaya Lakshmi, S.Ningshen & J.Philip, IGCAR/MMG/CSTD/2020/388, dt.01.06.2020.
Corrosion assessment of 316L(N) SS and modified 9Cr-1Mo steel exposed to flowing sodium in Bi-Metallic loop for 16000, 30000, 40000 and 50000 hours at 798K, N.Sivai Bharasi, Ravi Shankar, Rani.P.George, J.Philip, S.Raju, Shaju.K.Albert, IGCAR/MMG/MCG/CSTD/2020/387, dt.14.08.2020. (Version-1)
Simulation of Corrosion of Carbon Steel in Flowing Argon at 450°C Used for Baffle Plates of heater vessel in HASS of IFTM in PFBR, Ravi Shankar, T.NandaKumar, C.Thinaharan, R.P.George, J.Philip, S.Raju, Shaju.K.Albert, PFBR/35240/DN/1110/Rev.A, June 2020.
Coating Thickness Measurement of Foundation Bolts, T.Nandakumar C.Thinaharan, R.P.George, J.Philip, IGCAR/MMG/MCG/CSTD/2020/386, dt.17.03.2020.
Pitting studies on Indigenous FBTR Translation bellows materials, Anita Toppo, B.Anand Kumar, M.Srinivas, S.C.S.P.Kumar Krovvidi, R.P.George, Chitta Ranjan Das, J.Philip, S.Raju, Shaju.K.Albert, IGCAR/MMG/MCG/CSTD/2020/385, dt.12.02.2020.
Chemical Reactivity Studies of therminol® RD Fluid on PFBR Construction Materials in Nitrogen Atmosphere, M.Archana, Avinash Kumar, Ch.J.Rao, S.Ningshen, J.Philip, S.Raju, Shaju.K.Albert, IGCAR/MMG/MCG/CSTD/2020/384, dt.30.01.2020. (Version-1)
Interim report on testing of newly manufactured RTds from KKNP, T.Nandakumar, C.Thinaharan, B.Anandkumar, Ravishankar, R.P.George, J.Philip, S.Raju, Shaju.K.Albert, IGCAR/MMG/MCG/CSTD/ 2019/383, dt.05.12.2019. (Version-1)
Effectiveness of biocides employed in FBTR service water system and new board spectrum biocides, Anandkumar, R.P.George, J.Philip, S.Raju, Shaju.K.Albert, IGCAR/MMG/CSTD/2019/382, dt. 05.12.2019. (Version-1)
Measurement of Coating Thickness on GI bolt, nut washers, T.Nandakumar, C.Thinaharan, R.P.George, J.Philip, IGCAR/MMG/MCG/CSTD/2019/381, dt. 29.11.2019.
Measurement of Coating Thickness of Anodized Aluminum, T.Nandakumar, C.Thinaharan, R.P.George, J.Philip, IGCAR/MMG/MCG/CSTD/2019/380, dt.11.11.2019.
Corrosion Test Report, P.Sundari, T.Nandakumar, Rani.P.George, J.Philip, IGCAR/MMG/CSTD/2019/379, dt.13.09.2019.
Failure Analysis of Corroded FBTR Carbon Steel Pipes with Multiple Pin Hole Leaks, A.Ravi Shankar, B.Anandkumar, C.Thinaharan, T.Nandakumar, R.P.George, J.Philip, G.Amarendra, IGCAR/MMG/ MCG/CSTD/2019/378, dt.28.08.2019. (Version-1)
Durability Evaluation of Plasma Sprayed Alumina Coating on Inconel 600 Collars for Fast Reactor Neutron Decretory Application, A.Ravi Shankar, Chandra Kant Upadhyay, R.P.George, C.P.Nagaraj, J.Philip, G.Amarendra, IGCAR/MMG/MCG/CSTD/2019/377, dt.14.08.2019. (Version-1)
Intergranular Corrosion Test report for SS 308L Filler Wire Deposit, T.Nandakumar, A.Ravi Shankar, R.P.George, J.Philip, IGCAR/MMG/CSTD/2019/376, dt 13.08.2019.
Stress Corrosion Cracking Threshold Stress Intensity Factor (KISSC) of Type 316 Stainless Steel, A.Poonguzhali, Anita Toppo, S.Ningshen, R.P.George, J.Philip, Shaju.K.Albert, IGCAR/MMG/CSTD/ 2019/375, dt.05.08.2019.
Failure Analysis of Resistance Temperature Detectors of Kudankulam Nuclear Power Project, A.Ravi Shankar, C.Thinaharan, T.Nandakumar, Avinash Kumar, R.P.George, J.Philip, Shaju.K.Albert, IGCAR/MMG/CSTD/2019/374, dt.05.08.2019. (Version-1)
Fireside and steam side corrosion evaluation procedure, E.Vetrivendan, S.Ningshen, Utpal Borah, J.Philip, Shaju.K.Albert, G.Amarendra, IGCAR-AUSC-TD-32/00, dt.31.07.2019.
Preliminary failure Analysis of Heat Resistant Peeling off Paint from 9Cr-1Mo AHX Tubes, E.Vetrivendan, S.Ningshen, J.Philip, G.Amarendra, IGCAR/MMG/CSTD/2019/373, dt.11.07.2019.
Intergranular Corrosion Test report of Modified 316 SS Weld for FBTR Control Rod Drive Mechanism, T.Nandakumar, A.Ravishankar, R.P.George, J.Philip, IGCAR/MMG/CSTD/2019/372, dt.13.06.2019. (Revised)
Chemical cleaning of corrosion products on bearing balls of large rotatable plugs of fuel handling facility of PBTR, Nandakumar, Ravishankar, R.P.George, J.Philip, IGCAR/MMG/MCG/CSTD/2019/371, dt.12.06.2019.
Removal of degraded surface layer on outer hexcan tubes of FSA: A comparison with buffed surfaces, T.Nandakumar, B.Anandkumar, A.Ravishankar, R.P.George, J.Philip, Shaju.K.Albert, G.Amarendra, IGCAR/MMG/MCG/CSTD/2019/370, dt.07.06.2019.
Intergranular Corrosion Test report for 316LN SS Weld Pad, M.Srinivas, A.RaviShankar, R.P.George, J.Philip, IGCAR/MMG/CSTD/2019/369, dt.28.05.2019.
FBTR service water corrosivity by coupon method, Sofia.S, T.NandaKumar, R.P.George, J.Philip, IGCAR/MMG/MCG/CSTD/2019/368, dt.09.05.2019.
Intergranular Corrosion Test report, T.Nandakumar, A.Ravi Shankar, R.P.George, J.Philip, IGCAR/ MMG/CSTD/2019/367, dt.06.05.2019.
FBTR service water corrosivity by coupon method, Sofia.S, T.NandaKumar, R.P.George, J.Philip, IGCAR/MMG/MCG/CSTD/2019/366, dt.01.04.2019.
Corrosion Rates of 304L SS and carbon Steel samples exposed to 0.12M NaCl solution, T.Nanda Kumar, A.Ravishankar, R.P.George J.Philip, IGCAR/MMG/MCG/CSTD/2019/365, dt.14.03.2019. (Version-1)
Studies on probability of crevice corrosion between Inconel 625 bellows and 316L SS end pipes on secondary sodium pipelines of FBRS, Anita Toppo, N.Sivai Bharasi, S.C.S.P.Kumar Krovvidi, R.P.George, J.Philip, Shaju.K.Albert, P.Selvaraj, G.Amarendra, IGCAR/MMG/MCG/CSTD/2019/364, dt.12.03.2019.
Environment-Friendly Chemical Formulation and Process for Cleaning Magnetite Deposits on P91 Steam Generator Tubes, Namrata Upadhyay, T.Nandakumar, A.Ravi Shankar, R.P.George, J.Philip, G.Amarendra, IGCAR/MMG/MCG/CSTD/2019/363, dt.11.03.2019. (Version-1)
FBTR service water corrosivity by coupon method, Sofia.S, T.NandaKumar, R.P.George, J.Philip, IGCAR/MMG/MCG/CSTD/2019/362, dt.04.03.2019.
Intergranular Corrosion Test report for 316LN SS Weld Pad, M.Srinivas, Ravi Shankar, R.P.George, J.Philip, IGCAR/MMG/CSTD/2019/361, dt.22.02.2019.
ASTM A262 practice - A Test and double loop electrochemical potential dynamic reactivation studies on outer hexcan tube sample stored over 25 years, T.Nandakumar, A.Ravi Shankar, R.P.George, J.Philip, G.Amarendra, IGCAR/MMG/MCG/CSTD/2019/360, dt.13.02.2019. (Version-1)
Oxidation studies of SS316LN and SS304L N in nitrogen atmosphere with oxygen and moisture impurities, Ch.J.Rao, M.Archana, Sriramachandra Aithal, C.Rajagopal, S.Ningshen, S.Clement Ravi Chandar, J.Philip, G.Amarendra, IGCAR/MMG/MCG/CSTD/2019/359, dt.04.02.2019. (Version-1)
Intergranular Corrosion Test report, T.Nandakumar, R.P.George, J.Philip, IGCAR/MMG/CSTD/2019/358, dt.01.02.2019.
Corrosion analysis of 25-30-year-old outer hexcan tubes of FSA, T.Nandakumar, C.Thinaharan, B.Anandkumar, A.RaviShankar, R.P.George, J.Philip, IGCAR/MMG/MCG/CSTD/2019/357, dt.30.01. 2019. (Version-1)
FBTR service water corrosivity by coupon method, Sofia.S, T.NandaKumar, R.P.George, J.Philip, IGCAR/MMG/MCG/CSTD/2019/356, dt.28.01.2019.
Effect of Impurities in nitric acid on Corrosion of Rate of Titanium, A.RaviShankar, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2019/355, dt.16.01.2019.
Effect of Impurities on Corrosion of Titanium dissolver material in nitric acid medium, R.Priya, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2019/354, dt.10.01.2019.
Effect of immersion time on thickness and weight loss of nickel rod in the flash pickling solution, Namrata Upadhyay A.Ravi Shankar, R.P.George, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/ 2019/353, dt.07.01.2019.
Intergranular corrosion test report, T.Nanda Kumar, R.P.George, J.Philip, IGCAR/MMG/CSTD/2019/ 352, dt.07.01.2019.
Effectiveness of various pickling solutions for cleaning Nickel 201 grade tubes of FBR, Namrata Upadhyay A.Ravi Shankar, R.P.George, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2019/351, dt.03.01.2019.
FBTR service water corrosivity by coupon method, T.Nanda Kumar, R.P.George, J.Philip, IGCAR/ MMG/MCG/CSTD/2019/350, dt.19.12.2018.
Failure analysis of thermo-siphon evaporator used in KARP, A.Ravi Shankar, R.P.George, S.Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2018/349, dt.14.12.2018.
FBTR service water corrosivity by coupon method, T.Nanda Kumar, R.P.George, J.Philip, IGCAR/ MMG/MCG/CSTD/2019/347, dt.14.11.2018.
Testing of anodized coating thickness of aluminum sections, P.Sundari, A.Ravi Shankar, R.P.George, J.Philip, IGCAR/MMG/MCG/CSTD/2018/346, dt.12.11.2018.
Testing of anodized coating thickness of various aluminum sections for head end facility building of DFRP, Srinivas Mannepalli, Ravi Shankar Anne, R.P.George, J.Philip, IGCAR/MMG/MCG/CSTD/2018/345, dt. 12.11.2018.
Testing of anodized coating thickness of aluminum sections, M.Srinivas, A.Ravi Shankar, R.P.George, J.Philip, IGCAR/MMG/MCG/CSTD/2018/344, dt.24.10.2018.
Corrosion of 304LSS & carbon steel exposed to liquid effluents discharged from spent sub-assembly washing facility of PFBR, T.Nanda Kumar, A.Ravi Shankar, R.P.George, B.Anoop, S.Athmalingam, J.Philip, S.Saroja, G.Amarendra, PFBR/37200/DN/1017/Rev.A, dt.15.10.2018.
Microbiological Corrosion of Krishnagiri Dam Shutters, B.Anandkumar, S.Sofia, R.P.George, J.Philip, S.Saroja, G.Amarendra, IGCAR/MMG/MCG/CSTD/2018/343, dt.04.10. 2018.
Preliminary analysis on the indications found in DSRDM Electromagnet at BHAVINI & FRTG, A.Ravi Shankar, A.Toppo, M.Nimal Sundaran, Sudheer Patri, R.P.George, K.Krishna Prasad, C.Meikanda murthy, J.Philip, B.K.Sreedhar, R. Vijayashree, PFBR/31440/DN/1094/RevA, dt.01.10.2018.
Testing of zinc coating thickness of MS angle frame, C.Thinaharan, A.Ravi Shankar, R.P.George, J.Philip, IGCAR/MMG/MCG/CSTD/2018/342, dt.14.09.2018.
Testing of zinc coating thickness on MS, C.Thinaharan, A.Ravi Shankar, R.P.George, J.Philip, IGCAR/ MMG/MCG/CSTD/2018/341, dt.14.09.2018.
Testing of zinc coating thickness of GI bolts (M12), Namrata Upadhyay, A.Ravi Shankar, R.P.George, J.Philip, IGCAR/MMG/MCG/CSTD/2018/340, dt.07.08.2018.
Intergranular Corrosion Test Report, M.Srinivas, C.Thinaharan, A.RaviShankar, R.P.George, J.Philip, IGCAR/MMG/MCG/CSTD/2018/339, dt.06.08.2018.
Design and fabrication of mini chemical cleaning loop for steam generator tubes of PFBR, Namrata Upadhyay, A.Ravi Shankar, R.P.George, T.NandaKumar, Amzad Pasha, J.Philip, S.Athmalingam, IGCAR/MMG/MCG/CSTD/2018/338, dt.18.09.2018.
Steam side corrosion allowance for Inconel 617M, 740H at 713,723 °C, E.Vetrivendan, A.Poonguzhali, S.Ningshen, J.Philip, S.Saroja, G.Amarendra, IGCAR-AUSC-TD-08/00, dt.14.09.2018.
Assessment of possible causes for the leakage of Zr-2.5Nb pressure tubes of MAPS-1, Ravi Shankar, S.Ningshen, R.P.George, J.Philip, Shaju.K.Albert, IGCAR/MMG/MCG/CSTD/2018/337, dt.20.07.2018.
FBTR service water corrosivity by coupon method, A. Vinod Kumar, R.P.George, J.Philip, IGCAR/ MMG/MCG/CSTD/2018/336, dt.17.07.2018.
FBTR service water corrosivity by coupon method, A. Vinod Kumar, R.P.George, J.Philip, IGCAR/ MMG/CSTD/2018/335, dt.13.06.2018.
Anodized aluminum sections cut from various locations for construction activities in building works-33 Nos, CSTD, Namrata Upadhyay, A.RaviShankar, R.P.George, J.Philip, IGCAR/MMG/MCG/ CSTD/333, dt.21.05.2018.
Corrosion rate of 304L SS exposed to simulated acidic liquid waste from the decontamination solution of primary sodium wetted components, T.NandaKumar, A.Ravi Shankar, R.P.George, J.Philip, IGCAR/MMG/MCG/CSTD/2018/332, dt.09.05. 2018.
The corrosion rate of 304LSS and Carbon Steel exposed to liquid effluents discharged from the decontamination facility of PFBR, T.NandaKumar, A.RaviShankar, R.P.George, J.Philip, S.Saroja, G.Amarendra, IGCAR/MMG/MCG/CSTD/2018/331, dt.07.05.2018.
Galvanized coating thickness on MS-X frame 4 Nos, A.Vinod Kumar, A.Ravi Shankar, R.P.George, J.Philip, IGCAR/MMG/MCG/CSTD/2018/330, dt.07.05.2018.
19. Corrosion data on material modified 9Cr1MO steel in different environments, N.Sivai Bharasi, Namrata Upadhayay, Anita Toppo, A.Ravi Shankar, R.P.George, J.Philip, IGCAR/MMG/MCG/CSTD/ 2018/329, dt.04.05.2018.
FBTR service water corrosivity by coupon method, A. Vinod Kumar, R.P.George, J.Philip, IGCAR/ MMG/MCG/CSTD/2018/328, dt.24.04.2018.
Intergranular corrosion test report, R.Priya, Ningshen, J.Philip, IGCAR/MMG/MCG/CSTD/2018/327, dt.13.04.2018.
Galvanized coating thickness on MS-X frame-2 Nos, A.Ravi Shankar, R.P.George, J.Philip, IGCAR/ MMG/CSTD/2018/326, dt.09.04.2018.
Corrosion product analysis of LV and PT printed circuit board from BHAVINI, A.Ravi Shankar, S.R.Polaki, Vanithakumari, DNGKrishna, R.P.George, J.Philip, IGCAR/MMG/MCG/CSTD/2018/325, dt.31.05.2018. (Version-2)
Interim Report on Failure Analysis of LV and PT printed Circuit board from BHAVINI, A.Ravi Shankar, S.R.Polaki, S.C.Vanithakumari, DN.G.Krishna, Rani.P.George, J.Philip, IGCAR/MMG/MCG/CSTD/2018/325, dt.22.03.2018. (Version-1)
Interim Report on Pin hole leak problems in raw water systems of Kaiga generation system - 1&2, B.Anandkumar, A.RaviShankar, R.P.George, S.Ningshen, J.Philip, S.Saroja, G.Amarendra, IGCAR/ MMG/MCG/CSTD/2018/324, dt.06.03.2018.
Recommendation on the 9th steam generator assembly chemical cleaning done at L&T Heavy Engineering, Anita Toppo, E.Vetrivendan, R.P.George, S.Ningshen, J.Philip, IGCAR/MMG/MCG/ CSTD/2018/SGA-34845-I, dt.05.03.2018.
Heat treatment of 17-4PH Steel (ASTM A546 Type 630 Material) - Failed Fuel Location Module Pins, K.Thyagarajan, S.Ningshen, J.Philip, IGCAR/MMG/CSTD/2018/323, dt.22.02.2018.
FBTR service water corrosivity by coupon method, A. Vinod Kumar, R.P.George, J.Philip, IGCAR/ MMG/MCG/CSTD/2018/321, dt.13.02.2018.
FBTR service water corrosivity by coupon method, A. Vinod Kumar, R.P.George, J.Philip, IGCAR/ MMG/MCG/CSTD/2018/320, dt.18.01.2018.
FBTR service water corrosivity by coupon method, A. Vinod Kumar, R.P.George, J.Philip, IGCAR/ MMG/MCG/CSTD/2017/316, dt.12.12.2017.
Testing of Aluminium sections for anodized coating thickness, A.Ravi Shankar, R.P.George, J.Philip, IGCAR/MMG/CSTD/2017/315, dt.07.12.2017.
FBTR service water corrosivity by coupon method, A. Vinod Kumar, R.P.George, J.Philip, IGCAR/ MMG/MCG/CSTD/2017/314, dt.26.10.2017.
Intergranular Corrosion Test Report, M.Srinivas, A.Ravi Shankar, R.P.George, J.Philip, IGCAR/MMG/CSTD/2017/313, dt.26.10.2017.
FBTR Service water Corrosivity by coupon method, A.Vinod Kumar, R.P.George, J.Philip, IGCAR/ MMG/MCG/CSTD/2017/312, dt.28.09.2017.
FBTR service water corrosivity by coupon method, A. Vinod Kumar, R.P.George, J.Philip, IGCAR/ MMG/MCG/CSTD/2017/311, dt.29.08.2017.
Prediction of Atmospheric Corrosion of Carbon Steel Housing for Under Vessel Neutron Detectors of PFBR, M.G.Pujar, J.Philip, Saroja Saibaba, G.Amarendra, IGCAR/MMG/CSTD/2017/310, dt.01.09. 2017.
FERROFLUID SEAL REPORTS
High-Temperature Endurance Testing of Ferro Fluid seal on 70mm Diameter Shaft (Second Campaign), R.Nirmal Kumar, Prashant Sharma, T.Muthukumaran, S.I.Sundar Raj, J.Philip, S.K.Sreedhar, IGC/FRTG/SE, HD/LCTS/99140/ex/3043, dt.24.07.2019.
High-temperature endurance testing of Ferrofluid seal on 70mm diameter shaft, R. Nirmalkumar Prashant Sharma, Muthukumaran, J.Philip, B.K.Sreedhar, IGC/FRTG/SE, HD/LCTS/99140/EX/3037, dt.06.06.2017.
Dynamic endurance testing of Ferrofluid seals on 70mm diameter shaft, R. Nirmalkumar, Prashant Sharma, Muthukumaran, J.Philip, B.K.Sreedhar, IGCAR/FRTG/SE,HD/LCTS/99140/EX/3036, dt.2016.
High-temperature endurance testing of Ferrofluid seal on 70mm diameter shaft, R. Nirmalkumar, Prashant Sharma, T.Muthukumaran, J.Philip, B.K.Sreedhar, IGCAR/FRTG/LCTS/99140/EX/3032, dt.03.07.2014.
Design and test the multistage Ferrofluid seal on a 70mm diameter shaft, R. Nirmalkumar, Prashant Sharma, T.Muthukumaran, J.Philip, B.K.Sreedhar, IGCAR/FRTG/99140/DN/3030/R-A, dt.28.08.2013.
Thermal imaging of 70mm shaft Ferrofluid sealant test assembly at FRTG, S.Bagavathiappan, B.B. Lahiri, J.Philip, IGCAR/MMG/NDED/RTS/IRT_01/13, dt.10.09.2013.
Design and testing of Ferrofluid seal on 70mm diameter shaft, R.Nirmalkumar, Prashant Sharma, T.Muthukumaran, J.Philip, B.K.Sreedhar, IGCAR/FRTG/99140/EX/3028/RA, dt.2012.
Ferrofluid Seal for 25mm Diameter shaft-Fifth test campaign results, R.Nirmalkumar, Prashant Sharma, T.Muthukumaran, J.Philip, B.K.Sreedhar, IGCAR/FRTG/LCTS/99140/EX/3020/R-A, dt.01.07.2011.
Burst pressure and endurance tests of Ferrofluid seal on 25mm diameter shaft, R.Nirmalkumar, Prashant Sharma, T.Muthukumaran, J.Philip, B.K.Sreedhar, IGCAR/FRTG/LCTS/99140/EX/3015, dt.16.08.2010.
Ferrofluid Seal for 25mm Diameter shaft test results, R.Nirmalkumar, Prashant Sharma, T.Muthu kumaran, J.Philip, B.K.Sreedhar, IGCAR/FRTG/LCTS/99140/EX/3012, dt.23.03.2009.
Ferrofluid Seal for 25mm Diameter shaft-third test campaign results, R.Nirmalkumar, Prashant Sharma, T.Muthukumaran, J.Philip, B.K.Sreedhar, IGCAR/FRTG/LCTS/99140/EX/3013, dt.04.11.2009.
Static Tests of Ferro Fluid Seal-Second Campaign Results, R.Nirmalkumar, Prashant Sharma, T.Muthukumaran, J.Philip, B.K.Sreedhar, IGCAR/FRTG/C,IDD/LCTS/99140/EX/3009, dt.01.01.2008.
Assembly and test procedure of static Ferrofluids seal, R.Nirmalkumar, Prashant Sharma, T.Muthu kumaran, J.Philip, B.K.Sreedhar, IGCAR/FRTG/C,IDD/LCTS/99140/EX/3006, dt.27.03.2007.
Literature survey on Ferrofluid seals, R.Nirmalkumar, Prashant Sharma, T.Muthukumaran, J.Philip, B.K.Sreedhar, IGCAR/FRTG/C,IDD/LCTS/99140/EX/3007, dt.09.07.2004.
THERMOGRAPHY & RADIOGRAPHY REPORTS
Infrared thermography based detection of circular and square defects in mild steels specimens using low frequency alternating magnetic field induced heating, B.B.Lahiri, S.Bagavathiappan, J.Philip, T.Jaya kumar, IGCAR/MMG/NDED/RTS/IRT_05/16, dt.17.06.2016.
Emissivity determination of SS316 surface using infrared thermography, B.B.Lahiri, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/MMG/NDED/RTS/IRT_04/16, dt.16.06.2016.
Infrared thermography based studies on tensile deformation in copper at different strain rates, B.B.Lahiri Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/MMG/NDED/RTS/IRT_03/16, dt.15.06.2016.
Online temperature measurement during TIG welding of SS 316 butt joints using infrared thermography, B.B.Lahiri, Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/MMG/NDED/RTS/IRT02/16, dt.14.06.2016.
Infrared thermography based studies on tensile deformation of high strength low alloy (HSLA), B.B.Lahiri Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/MMG/NDED/RTS/IRT_01/16, dt.13.06.2016.
Simulation and experimental studies for optimization of filter materials and thickness for enhanced defect sensitivity in dissimilar weld joints, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/ MMG/ISO/NDED/RTS/RT/01/2016, dt.2016.
X-ray computed tomography of metal matrix composite (Al-alloy with SiC), K.Arunmuthu, S.Bagavathiappan, T.Saravanan, J.Philip, IGCAR/MMG/NDED/RTS/CT/01/2016, dt.2016.
X-ray radiography analysis on heat-exchanger tubes of MAPS-2, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/MMG/NDED/RTS/03/15, dt.19.12.2015.
Infrared thermography based studies on fatigue testing of Nickel-Aluminum-Bronze (NAB) alloy, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/MMG/NDED/RTS/2015/01, dt.24.08. 2015.
X-ray radiography analysis of Irradiated MOX sphere-pac and pellet fuel pins, T.Saravanan, K.Arunmuthu, B.B.Lahiri, Bagavathiappan, V.V.Jayaraj, B.K.Ojha, Padmaprabhu, C.N.Venkiteswaran, J.Philip, R.Divakar, B.P.ChandraRao, Jojo Joseph, IGCAR/MMG/NDED/RTS/01/15, dt.01.05.2015.
X-ray radiography analysis on dissimilar weld plate, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/MMG/NDED/RTS/02/15, dt.2015.
X-Radiography of 148.3 GWd/t irradiated Mark-I fuel pins of failed fuel sub assembly, T.Saravanan, K.Arunmuthu, B.B.Lahiri, Bagavathiappan, V.V.Jayaraj, B.K.Ojha, Padmaprabhu, C.N.Venkiteswaran, J.Philip, R.Divakar, B.P.ChandraRao, Jojo Joseph, T.Jayakumar, IGCAR/MMG/NDED/RTS/01/14, dt. 22.11.2014.
Online monitoring of cutting tool and work-piece temperature during micro - end milling using infrared thermography, Barid Baran Lahiri, S.Bagavathiappan, J.Philip, B.P.Chandra Rao, IGCAR/MMG/NDED/RTS/2014/01, dt.10.9.2014.
Study on the effect of strain rate on tensile behaviour of AISI type 316 stainless steel using acoustic emission and infrared thermography, T.K.Haneef, B.B.Lahiri, S.Bagavathiappan, Mukhopadhyay, J.Philip, B.P.Chandra Rao, IGCAR/MMG/NDED/EMSIS/2014, dt.22.05.2014.
Infrared thermography studies on shrink-fit annular steel specimens, B.B.Lahiri, S.Bagavathiappan, T.Saravanan, J.Philip, IGCAR/MMG/RTS/NDED/MMG/2014-4, dt.13.05.2014.
Infrared thermography studies on simulated metallic fuel pins, B.B.Lahiri, S.Bagavathiapan, J.Philip, B.P.ChandraRao, IGCAR/MMG/NDED/RTS/IRT/2013/01, dt.14.05.2013.
Study of defects of different shapes in glass fiber reinforced polymer specimen using active infrared thermography, Barid Baran Lahiri, S.Bagavathiappan, J.Philip, B.P.Chandra Rao, IGCAR/MMG/NDED/RTS/IRT/2013/02, dt.12.12.2013.
Functionality evaluation of lock-in thermal imaging system, S.Bagavathiappan, B.B.Lahiri, J.Philip, B.P.Chandra Rao, IGCAR/MMG/NDED/RTS/IRT/2012/01, dt.09.08.2012.
Acoustic emission and thermography studies during hydrotesting of stainless steel pressure vessels with artificial defects, T.K.Haneef, B.B.Lahiri, S.Bagavathiappan, C.K.Mukhopadhyay, J.Philip, B.P.Chandra Rao, IGCAR/MMG/NDED/EMSIS/2012/02, dt. 30.08.2012.
Feasibility study on measurement of radial gap using thermal imaging technique, S.Bagavathiappan, B.B.Lahiri, J.Philip, IGCAR/MMG/NDED/RTS/IRT-02/2012, dt.25.06.2012.
Defect detection in high density and low density rubber specimens using lock-in thermography, S.Bagavathiappan, B.B.Lahiri, J.Philip, IGCAR/MMG/NDED/RTS/IRT-03/2012, dt.20.06.2012.
Upgradation of infrared thermal imaging system, S.Bagavathiappan, B.B.Lahiri, J.Philip, IGCAR/MMG/NDED/RTS/IRT-01/2012, dt.26.04.2012.
Post irradiation examination of PFBR MOX test fule subassembly (FSANOIF010005) irradiated in FBTR to burn-up of 112 Gwd/t, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/MMG/ PIED/MOX FSA/IF010005/Rev.0, dt.30.03.2012.
Radiography report on 112 Gwd/t irradiated MOX fuel pins, T.Saravanan, K.Arunmuthu, B.B.Lahiri, S. Bagavathiappan, R.Vijaykumar, B.K.Ojha, T.Ulanganathan, C.N.Venkiteswaran J.Philip, R.Divakar, Jojo Joseph T.Jayakumar, IGCAR/MMG/NDED/SMARTS/01/12, dt.20.03.2012.
Defect depth quantification in GFRP using pulsed thermography technique, S.Bagavathiappan, B.B. Lahiri, J.Philip, IGCAR/MMG/NDED/SMARTS/IRT-02/2011, dt.24.11.2011.
Estimation of minimum size of the radial gap in different geometrical specimens using thermography technique, S.Bagavathiappan, B.B.Lahiri, J.Philip, IGCAR/MMG/NDED/SMARTS/IRT-01/2011, dt. 12.05.2011.
Radiography report on irradiated boron carbide control rods of FBTR, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/MMG/NDED/SMARTS/02/2009, dt.28.05.2009.
Microfocal X-ray radiography report on Alumina Housing of plasma thrusters of ISRO, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/MMG/NDED/SMARTS/RT-02/2009, dt. 18.03.2009.
Thermography analysis of composite materials, S.Bagavathiappan, B.B.Lahiri, J.Philip, IGCAR/MMG/NDED/SMARTS/IRT-01/09, dt.12.03.2009.
Determination of internal concavity and convexity of tube to tubesheet welds of steam generators of PFBR by replica technique, K.Arunmuthu, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/MMG/NDED/SMARTS/03/2008, dt.25.08.2008.
Resolution studies on closely spaced defects by stereo radiography, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/MMG/NDED/SMARTS/02/2008, dt.04.08.2008.
Radiography report on Shaligram stone, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/MMG/NDED/SMARTS/01/2008, dt.16.07.2008.
Evaluation of welds in centrifugal bowl by X-ray radiography, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/MMG/NDED/SMARTS/04/2008, dt.2008.
X-Radiography report on model cold trap for detection of sodium impurities, T.Saravanan X-ray Radiography report on Electrochemical hydrogen meter (ECHM MK6-18), T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/MMG/NDED/SMARTS/23/2007, dt.27.12.2007.
Estimation of density variation in the boron carbide packed in a SS capsule using radiography technique, T.Saravanan, Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/MMG/NDED/SMARTS/22/07, dt.14. 12.2007.
Measurement of thermal diffusivity of solids using continuous heat source and infrared thermo graphy, T.Saravanan, Bagavathiappan, J.Philip, Jayakumar, IGCAR/MMG/NDED/SMARTS/19/2007, dt.14.12.2007.
Investigation on peripheral vascular disorders using thermal imaging technique, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/MMG/NDED/SMARTS/20/07, dt.14.12.2007.
Thermography analysis of rubber based under water transducer components, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/MMG/NDED/SMARTS/21/07, dt.14.12.2007.
X-ray radiography report on Rubber based sensor assemblies of NPOL, DRDO, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/MMG/NDED/SMARTS/17/07, dt.07.12.2007.
X-ray radiography report on SS UO2 sphere packed by vibro compaction process, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/MMG/NDED/SMARTS/12/07, dt.01.12.2007.
Radiography report on 154GWD/T Irradiated fuel pin, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jaya kumar, IGCAR/MMG/NDED/SMARTS/11/07, dt.09.11.2007.
X-Radiography report on model cold trap for detection of sodium impurities, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/MMG/NDED/SMARTS/15/07, dt.1.11.2007.
Thermal analysis of motor and power control electrical panels of FBTR, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/MMG/NDED/SMARTS/13/07, dt.25.10.2007.
Thermal Imaging of Blower of Exhaust system at Plant room of Phase-I Area, RML Building, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/MMG/NDED/SMARTS/14/07, dt.25.10.2007.
Radiography evaluation report on Electrochemical hydrogen meter, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar IGCAR/MMG/NDED/SMARTS/10/2007, dt.11.07.2007.
Thermal Imaging of Blowers of Exhaust systems at RML Building, Phase-I Area, Plant room, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/MMG/NDED/SMARTS/08/07, dt.02. 07.2007.
X-ray radiography evaluation report on Dummy fuel pin, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/MMG/NDED/SMARTS/09/2007, dt.05.07.2007.
Radiography evaluation report on electro chemical hydrogen meter (ECHM), T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/ITG/NDED/SMARTS/07/07, dt.24.05.2007.
Determination of Internal Concavity and Convexity of Tube to Tube sheet Welds of Steam Generators of PFBR, by Replica Technique, K.Arunmuthu, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/ITG/NDED/SMARTS/07/2007, dt.04.05.2007.
Radiography Evaluation report on NFC Zircaloy Rod, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/NDED/SMARTS/NFC/10/2007, dt.23.04.2007.
Estimation of density variation on synroc samples by X-ray radiography, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/MMG/NDED/SMARTS/16/07, dt.2007.
Radiography report on UO2 sphere packed by vibro-compaction process (Phase-II), T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/MMG/NDED/SMARTS/18/07, dt.2007.
Radiography evaluation report on IOCL plate, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/NDED/SMARTS/IOCL/08/06, dt.28.11.2006.
Radiography evaluation report on trial hexcan seal welds, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/NDED/SMARTS/NFC/07/06, dt.28.11.2006.
Evaluation report on iron wire rope, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/ NDED/SMARTS/EMSIS/06/06, dt.16.10.2006.
Real-time radiography report on centrifugal rotating bowl assembly, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/ITG/NDED/SMARTS/05/2006, dt.13.10.2006.
Real-time radiography report on gas turbine blade, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/ITG/NDED/SMARTS/03/2006, dt.06.07.2006.
Radiography report on hairpin tube-Heavy water plant, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/ITG/NDED/SMARTS/04/2006, dt.06.07.2006.
Radiography Evaluation report on ERW pipe, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/NDED/SMARTS/02/06, dt.11.05.2006.
Radiography report on fresh MOX fuel pins, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar, IGCAR/ITG/NDED/SMARTS/02/2006, dt.03.04.2006.
Radiography report on Electrochemical hydrogen meter, T.Saravanan, S.Bagavathiappan, J.Philip, T.Jayakumar (ECHM), IGCAR/ITG/NDED/SMARTS/01/2006, dt.14.03.2006.
PRIS REPORTS
Optimization of Chemical Cleaning Procedures for Post Weld Heat Treated Steam Generator Tubes using Mini Cleaning Loop, 2021-2022 Point: 2.0
Development and Testing of Non-oxidizing Biocides and Corrosion Inhibitor Combination for Service/Fire Water Pipelines Using the Pilot Scale Cooling Tower, 2021-2022 Point: 1.0
Magnetic Fluid Hyperthermia in Mn-Zn Mixed Ferrite Nanoparticles with Tunable Curie Temperature, 2021-2022 Point: 1.0
High Temperature Steam and Air Oxidation Studies of Modified 9Cr-1Mo Steels Using Thermal Analyzer, 2021-2022 Point: 1.0
Synthesis of silicon carbide coated cobalt ferrite nanoparticles for selective removal of organic dyes, 2020-2021 Point:0.5.
CVD Pyrolytic graphite coating on HDG crucibles for U melting in metal fuel pin fabrication, 2020-2021 Point:0.5.
Design, fabrication and commissioning and testing of a pilot scale cooling water loop for evaluating the efficacy of multiple antibiofouling strategies for FBR condenser material, 2020-2021 Point:0.5.
Development of X-ray resistant nanocomposites containing multiple nanofillers, 2020-2021 Point:0.5.
Development, commissioning and testing of a automated mini cleaning loop for evolving efficient cleaning procedure for steam Generator tubes, 2020-2021 Point:1.0.
Development of Graphene oxide (GO) and polymer based anticorrosion coatings on Carbon Steel, 2019-2020 Point:0.5.
Installation and Commissioning of CVD system for Pyrolytic Graphite Coating and Demonstration of Pyrolytic Graphite Coating on a Process Crucible for Pyro-Reprocessing Application, 2019-2020 Point:1.
Thermal barrier ceramic coatings on SS 316L for Sacrificial core catcher of future FBR and Long term corrosion evaluation in molten sodium, 2019-2020 Point:0.5.
Synergistic Enhancement of Biofouling control using In situ Application of Alternate Potentials along with Chlorination on Titanium Condenser Materials, 2019-2020 Point:0.5.
High Temperature Corrosion studies of Alloy Steels (P91, 316LN SS) in Molten Metal Lead-Cooled Fast Reactor System, 2018-2019 Point:0.5.
Evaluation of durability of Plasma Sprayed Alumina Coating on Inconel 600 collars for Fast Reactor Neutron Detector Application, 2018-2019 Point:0.5.
Development of high performance green nuclear concrete through nanophase modification and inhibitor addition for seawater applications, 2018-2019 Point:0.5.
Corrosion Evaluation and Qualification of FRFCF type 304L Stainless Steel and its Weld in Nitric Acid Environment, 2018-2019 Point:0.5.
Demonstration of antibacterial efficacy of Ti tubes with internal nano-copper electroless coating, (Sr.No.116) 2017-2018 Point:0.5.
Development of 9Cr-1Mo steel-Zr-noble metal fission products-U metal waste form alloy and evaluating its corrosion behavior in simulated ground water media, (Sr.No.81), 2017-2018 Point:0.5.
Probing of molecular interaction forces in the presence of temperature responsive polymer at emulsion interfaces, 2016-2017 Point:0.5.
Establishing of a high frequency magnetic field generator and coils for studies on field assisted heating of magnetic nanofluids, 2015-2016 Point:1.
Establishing opto-rheological facility to probe micro-structural evolution of ferrofluid seal under shear, IGCAR PRIS Report, 2014-2015.
Feasibility Studies on cation sensing ability of magnetic nanoemulsions, 2013-2014.
Investigation of magnetic properties of ferrofluid seal using cryogen free Vibrating sample magnetometer (VSM), 2012-2013.
Development of new functionalized ferrofluids with long term stability for ferro seal applications, 2012-2013.
DAE ANNUAL REPORTS
Development of laser patterned titanium surfaces with superior antibiofouling, superhydrophobicity, self-cleaning and durability, DAE Annual Report, 2020-2021
Corrosion studies on FBR materials, DAE Annual Report, 2020-2021
Role of oxygen vacancy and insulating behavior on darkening of white amorphous TiO2, DAE Annual Report, 2020-2021
Development of robust superhydrophobic aluminum surfaces with enhanced corrosion protection and antifouling properties, DAE Annual Report, 2020-2021
Imaging localized electrochemical activity of 304L SS - Zr-4 dissimilar joints using alternating current scanning electrochemical microscopy, DAE Annual Report, 2020-2021
Molten sodium corrosion of laser surface remelted yttria-stabilized zirconia thermal barrier coatings for FBR core catcher applications, DAE Annual Report, 2020-2021
Air and Steam Oxidation behaviour of Pyrolytic Graphite under Pyro Reprocessing conditions, DAE Annual Report, 2020-2021
High Temperature Electrochemical Corrosion Evaluation of 2.25Cr-1Mo Alloy in LiCl-KCl Molten Salt, DAE Annual Report, 2020-2021
Poly acrylic acid stabilized magnetic nanoemulsions for visual defect detection: Effect of pH on detection sensitivity and colloidal stability, DAE Annual Report, 2020-2021
Efficient Dye Degradation via Catalytic Persulfate Activation using Iron Oxide-Manganese Oxide Core-Shell Particle Doped with Transition Metal Ions, DAE Annual Report, 2020-2021
Development of a Sulfamic Acid-based Chemical Formulation for Effective Cleaning of Modified 9Cr–1Mo Steel Steam Generator Tubes, DAE Annual Report, 2019-2020.
Development of Super hydrophobic and Self cleaning Nanofibers with Chemical Repellence and Mechanical Durability by Electrospinning, DAE Annual Report, 2019-2020.
Enhanced corrosion protection of reinforcement steel with nanomaterial incorporated fly ash based cementitious coating, DAE Annual Report, 2019-2020
Enhanced Thermal Protection of Iron Oxide Nanoparticle by Insulating Nanoporous Char Layer: Effect of Core Size and Char Layer Properties, DAE Annual Report, 2019-2020.
Polymer Nanocomposites Containing β-Bi2O3 and Silica Nanoparticles: Thermal Stability, Surface Topography and X-ray Attenuation Properties, DAE Annual Report, 2019-2020.
Development of Oxidation and Corrosion resistant pyrolytic graphite coatings on process crucibles for pyrochemical reprocessing applications, DAE Annual Report, 2019-2020.
A Simple, Rapid and Single Step Method for Fabricating Super hydrophobic Ti Surfaces with Improved Water Bouncing and Self-cleaning Properties, DAE Annual Report, 2019-2020.
Anomalous Enhancement of Corrosion Resistance and Antibacterial Property of Commercially Pure Titanium with Nanoscale Rutile TiO2 Film, DAE Annual Report, 2019-2020.
Improved Efficacy of Imidazolium and Piperidinium Based Ionic Liquids on Inhibiting Biofilm Formation on Titanium and Carbon Steel Surfaces, DAE Annual Report, 2019-2020.
Effect of Impurities in Nitric Acid on the Corrosion of Commercially Pure Titanium in Boiling Nitric Acid Solution, DAE Annual Report, 2019-2020.
Yttria coating on Graphite crucibles used in pyro-chemical reprocessing, DAE Annual Report, 2018-2019.
Yttria-coated high denisty graphite (HDG) crucible with SiC as an interlayer, DAE Annual Report, 2018-2019.
Nano layer copper coating inside the Ti condenser tubes using electroless technique, DAE Annual Report, 2018-2019.
Development of Super-Hydrophobic Coating on Copper, DAE Annual Report, 2018-2019.
Corrosion analysis of FBR components, DAE Annual Report, 2018-2019.
High-Temperature molten salt corrosion in pyro-chemical reprocessing environment, DAE Annual Report, 2018-2019.
High Performance Green Concrete (HPGC) with improved strength and chloride ion penetration resistance, DAE Annual Report, 2018-2019.
Development of sacrificial ceramic coating on core catcher materials by plasma spray technique for future fast reactors, DAE Annual Report, 2017-2018.
Development of a flourscence in-siu hybridization probe for the rapid identification of biofilms, DAE Annual Report, 2017-2018.
Development of High performance Nano phase modified Fly ash concrete, DAE Annual Report, 2017-2018.
Development of 9Cr-1Mo steel -Zr-noble metal fission products-U metal waste form alloys for pyrochemical reprocessing application, DAE Annual Report, 2017-2018.
Development and validation of eletrochemical biofilm monitoring probe, DAE Annual Report, 2017-2018.
Development of a thermally tunable grating using thermo-responsive magnetic fluid, DAE Annual Report, 2017-2018.
Estimation of atmoshperic corrosion loss of carbon steel housing in the reactor vault of PFBR, DAE Annual Report, 2017-2018.
Development of Yttria coating with silicon carbide interlayer on high density graphite crucubiles for U-Zr Alloy Melting, DAE Annual Report, 2017-2018.
A new approach for Effective Thermal Transport in Magnetic fluids, DAE Annual Report, 2017-2018.
Advanced molecular biology analysis of metal - mircobe synergy in the corrosion of stainless steels, DAE Annual Report, 2016-2017.
Investigations on caustic cracking of modified 9Cr-1Mo steel in concentrated sodium hydroxide solutions, DAE Annual Report, 2016-2017.
Development of Ceramic Coatings for Sacrifical Core Catcher Application, DAE Annual Report, 2016-2017.
Development of Yttria coating on High density graphite crubiles for Uranium Melting, DAE Annual Report, 2016-2017.
Development of nanophase modified fly ash concrete for sea water applications, DAE Annual Report, 2016-2017.
IGC ANNUAL REPORTS
Laser surface remelting of YSZ and Alumina thermal barrier coating for sacrificial core catcher, IGC Annual Report, 2021.
Air and steam oxidation behaviour of pyrolytic graphite under pyro reprocessing conditions, IGC Annual Report, 2021.
High temperature corrosion evaluation of 2.25Cr-1Mo in LiCl-KCl Molten Salt by Electrochemical technique, IGC Annual Report, 2021.
New ways of fabrication of superhydrophobic titanium and aluminum surfaces with superior antibiofouling and self-cleaning abilities, IGC Annual Report, 2021.
Enhanced magnetic fluid hyperthermia in copper ferrite nanoparticles due to near-resonant relaxation dynamics, IGC Annual Report, 2021.
Effect of electric dipolar interaction on inter-droplet force profiles in magnetically polarizable Pickering nanoemulsions, IGC Annual Report, 2021.
Understanding the darkening of white amorphous TiO2 under X-ray irradiation, IGC Annual Report, 2021.
Efficient Degradation of Organic Effluents using Core-Shell Iron oxide-MnOx via Advance Oxidation Process, IGC Annual Report, 2021.
Synthesis of silicon carbide capped cobalt ferrite nanoparticles for organic dye removal, IGC Annual Report, 2021.
Long-term Exposure of MgAl2O4 and Y2O3 Thermal Barrier Coatings in Molten Sodium for FBR Core Catcher, IGC Annual Report, 2020.
Air oxidation of 9Cr-1Mo steel: Depth profiling of oxide layers using glow discharge optical emission spectrometry, IGC Annual Report, 2020.
Thermal oxidation of commercially pure Titanium (CP-Ti) for enhanced resistance to corrosion and biofilm formation, IGC Annual Report, 2020.
Studies on the efficacy of ionic liquids (ILs) on inhibiting biofilm formation on materials used in cooling water systems, IGC Annual Report, 2020.
Enhancement of hyperthermia efficiency in magnetic nano-emulsions at acidic pH: role of conformational changes of the stabilizing moieties, IGC Annual Report, 2020.
Development of Oil-Absorbent Iron oxide/MnOX Magnetic Nanoparticles and its Applications in Oil Recovery, IGC Annual Report, 2020.
Effect of Nitrogen on the Intergranular Stress Corrosion Cracking Resistance of 316LN Stainless Steel, IGC Annual Report, 2020.
Development of Pyrolytic Graphite Coating by CVD for Uranium Melting Application, IGC Annual Report, 2019.
Development of High Performance Green Nuclear Concrete through Nanophase Modification and Inhibitor Addition for Seawater Applications, IGC Annual Report, 2019.
Evaluation of Durability of Plasma Sprayed Alumina Coating on Inconel 600 collars for Fast Reactor Neutron Detector Application, IGC Annual Report, 2019.
Corrosion Behavior of Pyrolytic Graphite in UCl3-LiClKCl Molten Salt by Electrochemical Techniques, IGC Annual Report, 2019.
Enhancement in Field Induced Heating Efficiency under in-situ Orientation of Super paramagnetic Iron Oxide Nano particles in Dispersion, IGC Annual Report, 2019.
Development of Polymer based Nano-composites for Diagnostic X-ray Shielding, IGC Annual Report, 2019.
Enhanced Antibatercial Efficacy of Condenser Ti Tubes with Nano layer Copper Coating inside the Tubes using Electroless Technique, IGC Annual Report, 2018.
Eletrochemical Monitoring of High-Temperature Molten Salt Corrosion in Pyrochemical Reprocessing Environment, IGC Annual Report, 2018.
Effect of Orientational Ordering of Magnetic Nanoemulsions Immobilized in Agar Gel on Magnetic Fluid Hyperthermia, IGC Annual Report, 2018.
Interlayer Coatings on HDG for Improving the Performance of Yttria Top coat for Cathode Processing and Uranium Melting, IGC Annual Report, 2018.
Experimental Evidence for the Significant Role of initial cluster Size and Liquid Con finement on Thermo-Physical Properties of Magnetic Nanofluids, IGC Annual Report, 2018.
A novel Approach for Phase Identification in Binary Mixture of Nanopowders from Deconvoluted Valence Band Spectra using X-ray Photoelectron Spectroscopy, IGC Annual Report, 2018.
Simulation of model Subassembly Melting using Thermite process, IGC Annual Report, 2018.
Fluorescence in situ hybridization (FISH) Probe a fast and reliable tool for bacterial identification from cooling water biofilms, IGC Annual Report, 2017.
Effects of polydispersity and medium viscosity on the magnetic hyperthermia efficiency, IGC Annual Report, 2017.
Shrouded Plasma Spraying (SPS) of Tantalum Over Titanium for Corrosion Protection in Fluorinated Nitric Acid Media, IGC Annual Report, 2017.
Corrosion and Micro chemical Characterization of M45 Grade Concrete Exposed to Sea Water Environment, IGC Annual Report, 2017.
Performance evaluation of Ti electrode with platinum nanoparticles loaded TiO2 nanotube surface, IGC Annual Report, 2017.
Enhanced Thermal Stability of Phosphate Capped Magnetite Nanoparticles, IGC Annual Report, 2014.
Infrared thermography based defect detection in ferromagnetic specimens using low frequency alternating magnetic field induced heating, IGC Annual Report, 2014.
Measurement of Annular Air-gap using active infrared thermography, IGC Annual Report, 2013.
Detection of Cations using Magnetic Nanoemulsions, IGC Annual Report, 2013.
Thermogelling Properties of Triblock Copolymers in the Presence of Hydrophilic Fe3O4 Nanoparticles and Surfactants, IGC Annual Report, 2012.
Acoustic Emission and Thermography Studies during Hydrotesting of Stainless Steel Pressure Vessels with Artificial Defects, IGC Annual Report, 2012.
Ferrofluid seal development for sodium pump, IGC Annual Report, V7, pp 126, 2011.
Thermal and rheological properties of response stimuli nanofluid, IGC Annual Report, V8, pp 127-128, 2011.
Influence of Aggregation on Thermal conductivity Enhancement in Stable and unstable nanofluids, IGC Annual Report, V8, pp 155-157, 2010.
Early Detection of Diabetic Neuropathy using Infrared Thermal Imaging, IGC Annual Report, 2010.
Post Irradiation examination of control rod assembly, IGC Annual Report, 2009.
Reversible zippering of Chains in Magnetic Nanofluid under External Magnetic Field, IGC Annual Report, V10, pp 126-128, 2009.
Nanofluids with enhanced thermal properties, IGC Annual Report, 2008.
Tailoring of stable ferrofluids for various applications, IGC Annual Report, 2007.
Field-induced extinction of light in a magnetic nanofluid, IGC Annual Report, 2006.
A novel force microscope for probing weak forces between nanometer sized objects, IGC Annual Report, 2005