Load Cells

 

 
Selecting the proper load cell type for your application is a critical task as each load cell offers its own unique attributes. The following page will help clarify the different types of load cells available to you on our site and essentially guide you towards selecting the right load cell type.
 

Load Cell Type - Title And Diagram:

 
SINGLE POINT LOAD CELLS
 
 
 
 
 
 
 
 

 

 
SHEAR BEAM LOAD CELLS
 

 
 
 
 
 
 
 
 

 
BENDING BEAM LOAD CELLS
 
 
 
 
 
 
 
 
 

 
DOUBLE ENDED BEAM LOAD CELLS
 
 
 
 
 
 
 
 
 
 

 
S TYPE LOAD CELLS
 
 
 
 
 
 
 
 
 
 

 
COMPRESSION LOAD CELLS
 
 
 
 
 
 
 
 
 
 

Load Cell Type - Description:

 
 
 


The single point load cell is mounted in the center of a scale, directly bolted to the base frame and load carrier. Special characteristic is the low sensitivity against off center load. They have low cost and they are suitable for industrial applications such as small size floor scales, filling machines and bagging machinery.


 
 

 
The beam type load cells gives the perfect corner accuracy and shear technology provides a very stiff load cell which is not adversely affected by unwanted side forces, end forces and bending moments. They are used in combination with related mechanical application parts are used in various standart scale applications such as floor scales, tank weighing, filliing machines, etc.


 
 
 

The beam type load cells are used in combination with application related mechanical application parts are used in various standart scale applications of the weighing industry. Bending Beam loadcells are suitable for hopper and tank weighing, floor scales,conveyor scales and other applications. 
 

 


 
 
A more efficient solution at high capacities is the double ended shear beam. Typically the load cell is mounted at each end and then loaded through the centre using a specially designed mounting plate. Such load cells are now well established as a practical solution for tank and silo weighing. 
 
 

 

 
 

These loadcells are especially designed for applications with pulling forces or hanging load carriers. In combination with the application kit using two eye bolts, a perfect load introduction is available. The S beam is also used to convert mechanical scales to digital. 

 

 
 
 


Compression type loadcells are designed as rocker loadcells with a single column and offer an economic and reliable solution in combination with a set of hardened loading cups. They are suitable in weighbiridges, railway weighing scales, tank and silo weighing.

 

Load Cell Model By Type:

 



> Model 1250
> Model 1260
 
 
 
 

  

 


> Model 3410
> Model 3510