Halloysite nanotubes

De Silva, R.T., Pasbakhsh, P., Goh, K.L., Chai, S.-P., Ismail, H. Physico-chemical characterisation of chitosan/halloysite composite membranes

(2013) Polymer Testing, 32 (2), pp. 265-271.

Pasbakhsh, P., Churchman, J., Keeling, J. 

Characterisation of properties of various halloysites relevant to their use as nanotubes and microfibre fillers, Appl. Clay Sci. (2013)

Pasbakhsh, P., Ismail, H., Fauzi, M.N.A., Bakar, A.A.

EPDM/modified halloysite nanocomposites(2010, Applied Clay Science, 48 (3), pp. 405-413.

Pasbakhsh, P., Ismail, H., Fauzi, M.N.A., Bakar, A.A.

The partial replacement of silica or calcium carbonate by halloysite nanotubes as fillers in ethylene propylene

diene monomer composites,(2009) Journal of Applied Polymer Science, 113 (6), pp. 3910-3919.

Pasbakhsh, P., Ismail, H., Fauzi, M.N.A., Bakar, A.A. 

Influence of maleic anhydride grafted ethylene propylene diene monomer (MAH-g-EPDM) on the properties of 

EPDM nanocomposites reinforced by halloysite nanotubes (2009) Polymer Testing, 28 (5), pp. 548-559. Cited 12 times.

Ismail, H., Pasbakhsh, P., Ahmad Fauzi, M.N., Abu Bakar, A. 

The effect of halloysite nanotubes as a novel nanofiller on curing behaviour,  mechanical and microstructural properties

of ethylene propylene diene monomer (EPDM) nanocomposites (2009) Polymer - Plastics Technology and Engineering, 48 (3), pp. 313-323. 

Ismail, H., Pasbakhsh, P., Fauzi, M.N.A., Abu Bakar, A. 

Morphological, thermal and tensile properties of halloysite nanotubes filled ethylene propylene diene monomer 

(EPDM) nanocomposites (2008) Polymer Testing, 27 (7), pp. 841-850.

Pasbakhsh, P., Ismail, H., Mohd Nor, A.F., Bakar, A.A. Electron beam irradiation of sulphur vulcanised ethylene propylene diene monomer (EPDM) nanocomposites reinforced by halloysite nanotubes (2012) Plastics, Rubber and Composites, 41 (10), pp. 430-440. 

Fibre composites: Stress transfer mechanisms

Goh KL, Aspden RM, Mathias KJ, Hukins DWL, "Effect of fibre shape on stresses within fibres in fibre-reinforced composite materials" 

Proceedings of the Royal Society of London A 455, 3351-61 (1999).

Goh KL, Aspden RM, Mathias KJ, Hukins DWL, "Finite element analysis of the effect of fibre shape on stresses within fibres in 

fibre-reinforced composite materials" Journal of Materials Science 35, 2493-297 (2000).

Goh KL, Aspden RM, Hukins DWL, "Finite element analysis of the effect of fibre shape and material properties on stresses in an 

elastic fibre embedded in an elastic matrix in a fibre composite material" Proceedings of the Royal Society of London A 460, 2339-52 (2004).

Goh KL, Aspden RM, Hukins DWL, “Review: finite element analysis of stress transfer in fibre composite materials” 

Composites Science and Technology 64, 1091-1100 (2004).

Goh KL, Aspden RM, Hukins DWL, “Shear lag models for stress transfer from an elastic matrix to a fibre in a composite material” 

 International Journal of Materials and Structural Integrity 1, 180-9 (2007)

Goh KL, Huq AMA, Aspden RM, Hukins DWL, Nano-fibre shape influences strength and toughness of composite materials, 

Advanced Composites Letters, 17, 131-133 (2008)

Goh KL, Meakin JR, Hukins DWL, Influence of fibre taper on the interfacial shear stress in fibre reinforced composites during 

 elastic stress transfer, Composite Interfaces 17, 75–81 (2010).

Goh KL, Tan LP, Micromechanical fibre-recruitment model of liquid crystalline polymer reinforcing polycarbonate composites, 

In: Damage and Fracture of Composite Materials and Structures, Editor: Prof M.N. Tamin, Springer-Verlag, Germany, 

Ng XW, Hukins DWL, Goh KL, Influence of fibre taper on the work of fibre pull-out in short fibre composite fracture 

(Journal of Materials Science, 2010, DOI: 10.1007/s10853-009-4050-2).

Fibre composites – collagen fibril reinforcing extracellular matrix

Goh KL, Aspden RM, Hukins DWL, “Critical length of collagen fibrils in extracellular matrix” Journal of Theoretical Biology 223, 259-61 (2003).

Goh KL, Holmes DF, Kadler KE, Murdoch A, Meakin J, Wess TJ, “Analysis of collagen fibril diameters in connective tissues using 

 small angle x-ray scattering” Biochimica Biophysica Acta –General Subjects 1722, 183-8 (2005)

Goh KL, Meakin JR, Aspden RM, Hukins DWL, “Influence of taper on the function of collagen to provide reinforcement in the 

 extracellular matrix” Proceedings of the Royal Society of London B 272, 1979–83 (2005).

Goh KL, Meakin J, Aspden RM, Hukins DWL, “Stress transfer in collagen fibrils reinforcing connective tissues: Effects of collagen 

fibril slenderness and relative stiffness” Journal of Theoretical Biology 245, 305-11 (2007).

Liu MJ, Chou SM,Goh KL, Tan SH, “Cross-Sectional Area Measurement of Soft Tissues In Vitro: A Non-Contact Laser Scan Method” 

Journal of Mechanics in Medicine and Biology, 8, 353-361 (2008).

Goh KL, Holmes DF, Lu Y-H, Richardson S, Kadler KE, Purslow PP, Wess TJ, “Ageing changes in the tensile properties of tendons: 

 influence of collagen fibril volume fraction” Journal of Biomechanical Engineering – Transactions of the ASME, 130(2), 021011 (2008).

Goh KL, Yang C, Chou SM, Listrat A, Bechet D, Wess TJ, Effects of low storage temperature on the elasticity of micro-tendons from a 

small murine model (Animals, 2010).

Yeo YL, Goh KL, Kin L, Wang HJ, Listrat A, Bechet D, Structure-Property Relationship of Burn Collagen Reinforcing Musculo-Skeletal Tissues, 

Vol 478, Volume: Advanced Computational Engineering and Experimenting, Edited by Andreas Öchsner, Lucas F.M. da Silva and 

Holm Altenbach, pp 87-92, DOI 10.4028/www.scientific.net/KEM.478.87

Lim BH, Ooi LH, Chou SM, Goh KL, Biomechanical properties of extensor tendon repaired using the six-strand single-loop suture 

technique: a comparative analysis with three other techniques (Journal of Mechanics in Medicine and Biology; 2011).

Carbon nanotubes

Huq AMA, Goh KL, Zhou ZR, Liao K, “On defect interactions in axially loaded single-walled carbon nanotubes” 

Journal of Applied Physics, 103, 054306, (2008).

Huq AMA, Bhuiyani BH, Liao K, Goh KL, Defect-defect interactions in single-walled carbon nanotubes during torsional loading 

(International Journal of Modern Physics B, accepted on Sep 18, 2009 for publication in 2010).

Biocomposites

Syukran Alhelmy Seri Buana, M., Pasbaskhsh, P., Goh, K.L., Bateni, F., Haris, M.R.H.M. Elasticity, 

microstructure and thermal stability of foliage and fruit fibres from four tropical crops. (2013) Fibers and Polymers, 14 (4), pp. 623-629.

Xie JZ, Hein S, Wang K, Liao K, Goh KL, “Influence of hydroxyapatite crystallization temperature and concentration on stress transfer 

in wet spun nanohydroxyapatite-chitosan composite fibre” Biomedical Materials 3, 1-5 (2008).

Chew SL, K Wang, Chai SP, Goh KL, Elasticity, thermal stability and bioactivity of polyhedral oligomeric silsesquioxanes reinforced 

chitosan-based microfibres J Mater Sci Mater Med. 2011 Jun;22(6):1365-74.

Wire-bonding

Dastgir, N., Pasbakhsh, P., Guo, N., Ismail, N., Goh Kheng, L. Finite element analysis of copper wire bonding in integrated circuit devices

(2012) Advanced Materials Research, 566, pp. 293-299.