Boundaries of Units

Declaration, Article IV

Section 4.3 - Boundaries. The boundaries of each Unit created by this Declaration, are located as shown on the Survey and Plans and Units other than the Telecommunications Roof Antenna Unit are more particularly described as follows:

4.3 (a) The finished surface of all floors and ceilings, as well as the exterior face of all perimeter wall surfaces, windows and exterior doors are designated as boundaries of a Unit.

4.3 (b) Inclusions: Each Unit shall include the space and Improvements lying within the boundaries described in Subsection 4.3(a) above, and shall also contain any pipes, wires, ducts and conduits situated in the perimeter walls of the Unit serving only that Unit.

4.3 (c) Exclusions: Except when specifically included by other provisions of Section 4.3, the following are excluded from each Unit: The spaces and Improvements lying outside of the boundaries described in Subsection 4.3(a) above; and all chutes, pipes, flues, ducts, wire, conduits, and other facilities running through any interior wall or partition for the purposes of furnishing utility and similar services to other Units or Common Elements or both.

4.3 (d) Inconsistency with Survey and Plans: If this definition is inconsistent with the Survey and Plans, then this definition shall control.