Ideation✨
Ideation✨
Embedded Files
Tell us about your assignment's idea for this week. Why do you care about this idea? What inspired you? (Please include images or links to sources of inspiration)
Tell us about your assignment's idea for this week. Why do you care about this idea? What inspired you? (Please include images or links to sources of inspiration)
I inspired by that smart lamp that change its color when you touch it
I inspired by that smart lamp that change its color when you touch it
I decided to elevate it so it can change color when waving your hand from different distance.
Tool Chain 💻
Tool Chain 💻
Which software/machines/materials did you use in the assignment? Why?
Which software/machines/materials did you use in the assignment? Why?
tinkerced
tinkerced
used software
Arduino uno
Arduino uno
bread board
is used for building circuits, and demonstrating its action
AURDUINO UNO
to be the brain of device
male male wires
male male wires
to connect two points to each other and make the circuit closed
220 ohm resistor
to reduce current flow, and divide voltages
digital output RGB lED
digital output RGB lED
is used to be the source of light as it abole to give diffrent light colors
analog input
analog input
ultrasonic sensor
ultrasonic sensor
to sence the user hand so the color could be changed
Design/Preparation Process 💻
Design/Preparation Process 💻
designing in tenkerkad
designing in tenkerkad
open tenkercad
open tenkercad
create new circit
create new circit
the circuit connection simulation
here is the final wiring, I used color coding, red for positive and black for negative for the RGB the red on pen 9 ,green on pen 10 ,blue on pen 11 and for the sensor red vcc on positive black ground on negative dark purpel Echo on pen ~3 and the light purpel triger on pen 2
the wiring
coding
coding
the code bolcks
the code bolcks
i used if else block then i added a math equation then i added( in put) read the ultrasonic sensor on trigger pin 2 and eco 3 then at distance 10 cm then i added( out put )set pen to high or low according to the color i choose and to be purple so i made red and blue pens to be high and green ben low and i repeated those steps for the second color which is yellow so i sated green and blue pens high and red low and the distance 20 cm and i repeated steps Agin for third color which is blue so i sated blue to be high and green and red to be low and the distance was 30 this time in else i seted all led pen to be low so when is no signal it will give a white color
i used if else block then i added a math equation then i added( in put) read the ultrasonic sensor on trigger pin 2 and eco 3 then at distance 10 cm then i added( out put )set pen to high or low according to the color i choose and to be purple so i made red and blue pens to be high and green ben low and i repeated those steps for the second color which is yellow so i sated green and blue pens high and red low and the distance 20 cm and i repeated steps Agin for third color which is blue so i sated blue to be high and green and red to be low and the distance was 30 this time in else i seted all led pen to be low so when is no signal it will give a white color
the circuit connection
as it showed, I connected components with the breadboard like the wiring in Tinkercad
as it showed, I connected components with the breadboard like the wiring in Tinkercad
uploading the code on Arduino software
uploading the code on Arduino software
I copied the text code from tenkercad and uploaded it on Arduino software
week 6 vid.mp4here is the final result
here is the final result
Community of Learning
Community of Learning
Did you ask for feedback? What are the ideas that others have contributed or suggested? What was someone else’s idea that you built upon? How did you help your peers? How did your peers help you?
Did you ask for feedback? What are the ideas that others have contributed or suggested? What was someone else’s idea that you built upon? How did you help your peers? How did your peers help you?
Title of Media
Overcoming Challenges
Overcoming Challenges
When you got stuck, what/who did you turn to? At what point did you have to pause to research or learn more before moving on? What are some mistakes, pitfalls, or challenges that others can avoid if they were doing this assignment?
When you got stuck, what/who did you turn to? At what point did you have to pause to research or learn more before moving on? What are some mistakes, pitfalls, or challenges that others can avoid if they were doing this assignment?
I had a problem that the RGB was lighting but not change colors it took me too long traying to find out what the problem as the code is uploaded successfully and the wiring was ok after that i realized that am not connected the 5v to circuit so the aurduino was not connected to the circuit
THE KEY OF SOLUTION IS trial and error
Final Project
Final Project
How can you use the skills and knowledge that you've acquired this week in your final project?
How can you use the skills and knowledge that you've acquired this week in your final project?
Title of Media
WOW!
WOW!
What is the coolest thing that you've learned this week? What is something that you will never forget from this week?
What is the coolest thing that you've learned this week? What is something that you will never forget from this week?
Title of Media
Weekly Digest [OPTIONAL]
Weekly Digest [OPTIONAL]
Tell us about any other cool things that you've made this week: in the Hands-on activity, tutorial examples, exercises, or any other cool mini-project that you tried out aside from the assignment.
Tell us about any other cool things that you've made this week: in the Hands-on activity, tutorial examples, exercises, or any other cool mini-project that you tried out aside from the assignment.
Title of Media
Assignment Design Files
Assignment Design Files
Page updated
Report abuse