Embedded Files
Ideation✨
Ideation✨
Tell us about your assignment's idea for this week. Why do you care about this idea? What inspired you? (Please include images or links to sources of inspiration)
Tell us about your assignment's idea for this week. Why do you care about this idea? What inspired you? (Please include images or links to sources of inspiration)
I'm so excited to make a pen holder for my desk to collect all my pens! I'm going to make it with a separator to keep the pencils and pens organized. I'm even going to add a motivational coat to get me pumped for work!
Tool Chain 💻
Tool Chain 💻
Which software/machines/materials did you use in the assignment? Why?
Which software/machines/materials did you use in the assignment? Why?
design tools
design tools
AUTO DESK FUSION 360
design matiral
design matiral
MDF
Thickness: 3mm
Fabrication tool CAM
Fabrication tool CAM
RDWorks
Design/Preparation Process 💻
Design/Preparation Process 💻
Explain the design and/or preparation process of your assignment. How did you use the tool or software to design and/or prepare your assignment before fabrication/implementation?
Explain the design and/or preparation process of your assignment. How did you use the tool or software to design and/or prepare your assignment before fabrication/implementation?
THE CAD SOFTWARE ( Fusion 360)
THE CAD SOFTWARE ( Fusion 360)
step zero
step zero
dont forget to save the file
step 1
step 1
don't forget to create a component for each panel
step 2
step 2
I Started with the front side it was 150mm x 150mm with T slot in 3 sides with the standerd T slot measurment
step 3
step 3
i excruded the side with 5 mm
then i used fillet feature to make the sides rounded
step 4
step 4
i mad the same steps to the back side in new comonent
step 5
step 5
I made a separator with 4 fingers and T slot in a new componen
I made a separator with 4 fingers and T slot in a new componen
step 6
step 6
i made the right and left sides in tow different new component with 4 projection and to finger slots and hole for screw
step 7
step 7
i excruded the left and right side by 5mm
step 8
step 8
i made the bottom side with finger slots
and screw holes
step9
step9
i made joint to assemble all components
step 10
step 10
save each component with dxf extention formate
CAM soft ware (RDworks)
CAM soft ware (RDworks)
i trasported all component in RD WORKS
i trasported all component in RD WORKS
i wrote a word on one side and i selected it to be scaned
i wrote a word on one side and i selected it to be scaned
cut parameter
cut parameter
speed 40 and power 45
scan parameter
scan parameter
speed 250 power 25
Development/Implementation Process
Development/Implementation Process
Explain the development/implementation process of your assignment. How did you use the machine/tool to manufacture or implement the design of your assignment?
Explain the development/implementation process of your assignment. How did you use the machine/tool to manufacture or implement the design of your assignment?
the cutting parameters on RD works software
implementation in steps: laser cutter
1I turn on the laser machine suction.
2I press on file and chose my file
3. set the origin on wood sheet and simulating the framing to make sure that the cut will be in the right place.
4 makeing sure everything is OK I press START.
the cuted parts
the cuted parts
the final result
the final result
the final result
the final result
the final result
the final result
the final result
the final result
Community of Learning
Community of Learning
Did you ask for feedback? What are the ideas that others have contributed or suggested? What was someone else’s idea that you built upon? How did you help your peers? How did your peers help you?
Did you ask for feedback? What are the ideas that others have contributed or suggested? What was someone else’s idea that you built upon? How did you help your peers? How did your peers help you?
Title of Media
Overcoming Challenges
Overcoming Challenges
When you got stuck, what/who did you turn to? At what point did you have to pause to research or learn more before moving on? What are some mistakes, pitfalls, or challenges that others can avoid if they were doing this assignment?
When you got stuck, what/who did you turn to? At what point did you have to pause to research or learn more before moving on? What are some mistakes, pitfalls, or challenges that others can avoid if they were doing this assignment?
I was up against a challenge when I first tried to make components. I put all the parts together as one component, which led to a problem when I tried to make the assembly.
The problem
But my instructor, Yahya, helped me figure it out
He showed me how to open the holder panel, and then I was able to create a new component to overcome the issue of interlocking components.
the solution
I had a problem after the fabrication. The measurement of the T-slots was not accurate and I excruded the shape by 5, which was not true. So, the parts of the pen holder could not fit inside each other. My instructor, Yahya, told me to excrude the shape by 3 because we will use 3-mm wood.and I decided to reduce the measurement to half to reuse the cut parts and not waste a new sheet.
I had a problem after the fabrication. The measurement of the T-slots was not accurate and I excruded the shape by 5, which was not true. So, the parts of the pen holder could not fit inside each other. My instructor, Yahya, told me to excrude the shape by 3 because we will use 3-mm wood.and I decided to reduce the measurement to half to reuse the cut parts and not waste a new sheet.
Final Project
Final Project
How can you use the skills and knowledge that you've acquired this week in your final project?
How can you use the skills and knowledge that you've acquired this week in your final project?
Title of Media
WOW!
WOW!
What is the coolest thing that you've learned this week? What is something that you will never forget from this week?
What is the coolest thing that you've learned this week? What is something that you will never forget from this week?
Title of Media
Weekly Digest [OPTIONAL]
Weekly Digest [OPTIONAL]
Tell us about any other cool things that you've made this week: in the Hands-on activity, tutorial examples, exercises, or any other cool mini-project that you tried out aside from the assignment.
Tell us about any other cool things that you've made this week: in the Hands-on activity, tutorial examples, exercises, or any other cool mini-project that you tried out aside from the assignment.
Title of Media
Assignment Design Files
Assignment Design Files
Page updated
Report abuse