Setting up Printers on personal devices (Windows or MacOS)

NWS uses software called PaperCut Mobility Print to make printers available to use. There are currently 14 printers available in the school to which students can print. In order to access any of these printers, you must follow the instructions for the Operating System your computer uses.

Apple (MacOS-Yosemite version 10.10.x or higher)

First, make sure you are connected to the NWS-Student WiFi network. If you are not, you will not be able to add any printers.

Next, follow the instructions below.

On your MacOS device:

• Navigate to System Preferences > Printers and Scanners.

• Click the + icon under the Printers List.

  • The Add dialog is displayed. It displays a list of all of the discovered printers on the network.

• Select a printer that uses the Bonjour protocol. The Name, Location, and Use is displayed.

• At the bottom of the dialog box, check that Use is set to Secure AirPrint.

• If Secure AirPrint isn't displayed:

  • Close the Add dialog.

  • Disconnect from the network, then reconnect to it again.

  • Check if you can see Secure AirPrint now. If you can't, contact the HelpDesk.

• Click Add.

• Print your document. When prompted, enter your network username and password.

Windows (version 10 or higher)

First, make sure you are connected to the NWS-Student WiFi network. If you are not, you will not be able to add any printers.

Next, Go here or follow the instructions below.

• Click this link to download and run the Mobility Print installer.

• You'll be prompted to select the printers you want to use, and to enter your network username and password.

• When it's time to print, just print like you normally do. Be sure to use a printer you selected when you installed Mobility Print.