6th Grade Shelf Project Part 1: Intro and tracing the backboard and the support brackets
6th Grade Shelf Project Part 2: Cutting, Filing and Sanding the Backboard
6th Grade Shelf Project Part 3: Cutting, Shaping, and Sanding the Support Brackets
6th Grade Shelf Project Part 4: Sanding the Shelf and the Routed Edge
6th Grade Shelf Project Part 5: Using the Cordless Drill to Attach the Backboard to the Shelf
6th Grade Shelf Project Part 6: Assembling the Brackets and Applying Wood Filler
6th Grade Shelf Project Part 7: Attaching the Shelf to a Wall at Home
6th Grade Shelf Project: Painting the Shelf
Name Block: Scroll sawing difficult cuts in difficult areas
POLYCRYLIC: CLEAR WATERPROOF FINISH
PAINTING USING THE OMBRE (OMBRAY) TECHNIQUE
Router (Handheld) Part 1 Safety/Technique
Router (Handheld) Time Lapse Video of a Sign
Cutting Board Part 1: Gluing and Clamping
Cutting Board Part 2: Using a Planer to Make the Surface Flat
Cutting Board Part 3: Sanding with a Palm Sander
Cutting Board Part 4: Applying Mineral Oil to a Cutting Board
Wood Tray Part 1: Measuring and Drawing the Diagonal Lines on the Handles
Wood Tray Part 2: Cutting the Diagonal Lines on the Handles
Wood Tray Part 3: Disc Sanding the Diagonal Lines on the Handle
Wood Tray Part 4: Measuring and Drilling the Holes in the Handles
Wood Tray Part 5: Cutting the Centers Out of the Handles
Wood Tray Part 6: Spindle Sanding the Oval-Shaped Handles
Wood Tray Part 7: Gluing and Nailing the Handles to the Sides
Wood Tray Part 8: Attaching the Bottom Slats
Wood Tray Part 9: Attaching the 3 Bottom Support Slats
Bag Toss Game Part 1: Clamping and Drilling for Screws
Bag Toss Game Part 2: Drilling and Securing the Screws on the Top
Bag Toss Game Part 3: Screwing the Corners Together and Cutting the Hole for the Bags
Bag Toss Game Part 5: Making the Legs and Attaching with Bolts
Adirondack Chair: Attaching the Front and Rear Uprights to the Chair Sides using Bolts
Skateboard, Longboard and Pennyboard: Gluing the thin layers of wood together using an Air Press Bag -Day 2
Cedar Bench Part 1: Screwing the Aprons together
Cedar Bench Part 2: Clamping the Frame Parts together before assembly
Cedar Bench Part 3: Drilling and Bolting the Frame Parts together
Cedar Bench Part 4: Screwing the Backboards and the Seatboards on
Cedar Bench Part 5: Sanding and Rounding over all sharp edges
Wood Bowl Part 1: Choosing Wood and Cutting the 4 Center Circles Out
Wood Bowl Part 2: Gluing, Clamping, Drawing the Outer Circle and Cutting With Instructor on Band Saw
Wood Bowl Part 3: Attaching the Faceplate and Turning the Circle on the Lathe
Wood Bowl Part 4: Rounding the Bottom Outside Corner on the Lathe
Wood Bowl Part 5: Cutting the Inside of the Bowl on the Lathe
Wood Bowl Part 6: Sanding the Bowl While Spinning on the Lathe
Wood Bowl Part 7: Plugging the Holes, Sanding the Bottom Outside and Applying Mineral Oil
Tombstone Clock: Cutting, Filing and Sanding
Tombstone Clock: Creating a 45 degree angle on the base using a Marking Gauge and Files