PUBLICATIONS
A. Kartheeswaran, T.J.S. Jothi, and Rahul S Arackal, Visualisation Studies on Plane Jets at Low Reynolds Numbers, Sādhanā, 2021 [Accepted].
Sabareesh V, Milan K John, Muraleedharan C, Rohinikumar B, “Improved solar drying Performance by ultrasonic desiccant dehumidification in indirect forced convection solar drying of ginger with phase change material”, Renewable Energy (accepted for publication).
CC Hsu, YA Lee, CH Wu, Sujith Kumar C.S., (2021), Self-propelled sessile droplets on a superheated and heterogeneous wetting surface, Colloids Surf, A Physicochem Eng. Asp., 126074.
2020
C.K. Sumesh and T.J.S. Jothi, Aerodynamic Noise from an Asymmetric Airfoil with Perforated Extension Plates at the Trailing Edge, International Journal of Aeroacoustics, 2020.
M.G. Arun and T.J.S. Jothi, Aerodynamic Noise Characteristics of the Flow past a Circular Cylinder, Noise Control Engineering Journal, 68(5):328-338, 2020.
Rahul S Arackal and T.J.S. Jothi, Acoustic Characteristics of Wall Jets over a Rough Surface, Noise Control Engineering Journal, 68(5):328-338, 2020.
T.N. Rajesh, T.J.S. Jothi and T. Jayachandran, Performance Analysis of a Vortex Chamber under Non-Reacting and Reacting Conditions, Sādhanā. Vol. 45:43, 2020.
N A Mandhare, K Karunamurthy and Saleel Ismail, Computational investigation of flow over nose cap of closed impeller of mixed flow centrifugal pump, ASME Journal of Pressure Vessel Technology, in press.
Mario R. Mata Arenales, Sujith Kumar C.S, Long-Sheng Kuo, Ping-Hei Chen (2020) Surface roughness variation effects on copper tubes in pool boiling of water, International Journal of Heat and Mass Transfer, 151, 119399.
GU Kumar, S Suresh, Sujith Kumar C.S., S Back, B Kang, HJ Lee (2020), A review on the roles of laser textured surfaces on boiling heat transfer, Appl. Ther. Eng, 115274.
S Das, R Johnsan, Sujith Kumar C.S, A Datta (2020), Experimental study of pool boiling heat transfer on an annealed TiO2 nanoflim heating surface, J. Therm. Anal. Calorim, 1-10.
2019
G. Gopi, T.J.S. Jothi and S. Kumaravel, Effect of Dye Concentration on Patterned Luminescent Solar Concentrator, Journal of Thermal Engineering, 2019. [Accepted]
Rahul S Arackal and T.J.S. Jothi, Role of plate length on noise from wall jets, Acta Acustica United with Acustica, Vol. 105, No. 6, pp. 928-942, 2019.
C.K. Sumesh and T.J.S. Jothi, Aerodynamic Noise Characteristics of a Thin Airfoil with Line Distribution of Holes Adjacent to the Trailing Edge, International Journal of Aeroacoustics, Vol. 18, No. 4-5, pp. 496-516, 2019.
Dora Nagaraju and T.J.S. Jothi, Emission Studies in CI Engine Using LPG and Palm Kernel Methyl Ester as Fuels and Di-Ethyl Ether as an Additive, Journal of The Institution of Engineers (India): Series C, Vol. 100, No. 4, pp. 627-634, 2019.
T.N. Rajesh, T.J.S. Jothi and T. Jayachandran, Preliminary Studies on Non-Reactive Flow Vortex Cooling, Recent Patents on Mechanical Engineering, 12: 1, pp 1-10, 2019.
Rajesh T.N., T.J. S. Jothi and T. Jayachandran, Cold Flow Studies in a Vortex Thrust Chamber, Aircraft Engineering and Aerospace Technology, Vol. 91, No. 1, pp 69-77, 2019.
T.J.S. Jothi and K. Srinivasan, Shock Structures of Underexpanded Non-circular Slot Jets, Sādhanā, Vol. 44:25, 2019.
M. Mubarak, A. Shaija, T. V. Suchithra, Flocculation: An effective way to harvest microalgae for biodiesel production, Journal of environmental chemical engineering, Vol. 7 (2019) 103221
S. Rajesh Kana & A. Shaija, Performance, combustion and emission characteristics of a diesel engine using waste avocado biodiesel with manganese-doped alumina Nanoparticles International Journal of Ambient Energy, DOI: 10.1080/01430750.2019.1707112
Feroskhan M, Saleel Ismail, Siddhesh Gosavi, Pranil Tankhiwale and Yasir Khan (April 2019). Optimization of performance and emissions in a biogas-diesel dual fuel engine with cerium oxide nanoparticle addition, Journal of Automobile Engineering, 233(5), 1178-1193.
N A Mandhare, K Karunamurthy and Saleel Ismail (October 2019), Compendious review on “Internal flow physics and minimization of flow instabilities through design modifications in a centrifugal pump”, ASME Journal of Pressure Vessel Technology, 141(5), 051601-1 – 051601-15.
Feroskhan M and Saleel Ismail (submitted Aug 2019 – under review), A comprehensive study of the effects of various operating parameters on the performance, emission and combustion indices of a biogas-diesel dual fuel engine, Renewable Energy.
Arun Raj K, Garud Kunal, M Mohanraj, Mokala Srinivas, Simon Jayaraj, Sujith Kumar C.S. (2019) Drying of Untreated Musa nendra and Momordica charantia in a Forced Convection Solar Cabinet Dryer with Thermal Storage, Energy, Accepted.
Sujith Kumar C.S, Yu Hsuan Chuang, Mario R. Mata Arenales, Albin Joseph, Ping-Hei Chen (2019) Effect of hydrophobic inclined patterns on pool boiling performance of cylindrical copper surfaces, Heat and Mass Transfer, Accepted.
Sreehari Sreekumar, Albin Joseph, Sujith Kumar C S, Shijo Thomas (2019) Synthesis, Characterization and Optimization of Full- spectrum Concentrated ATO/Ag Hybrid for Experimental Investigation of nanofluid based Parabolic Trough Direct Absorption Solar Collector (PTDASC), Journal of Cleaner Production, Accepted, 119378, in press.
Albin Joseph, Sreehari Sreekumar, C.S.Sujith Kumar, Shijo Thomas (2019) Optimisation of Thermo-Optical Properties of SiO2/Ag–CuO Nanofluid for Direction Absorption Solar collectors, solar energy materials and solar cells, J. Mol. Liq., 111986, in press.
Long-Sheng Kuo, Hsu-Sheng Huang, Te-Hshuan Chen, Sujith Kumar CS, Ping-Hei Chen (2019) Characteristics of Capillary Rise in Copper Braids with Surface Modification, J. Chin. Inst. Eng., 42(8), 720-726.
Krishnadass Karthick, S.Suresh, Mohammed Muaaz, M.D. Hussaina Hafiz, Muhammad Ali, C.S. SujithKumar (2019), Evaluation of solar thermal system configurations for thermoelectric generator applications: A critical review, Solar Energy, 188, 111-142.
AlbinJoseph, SreejithMohan, SujithKumar C.S, ArunMathew, ShijoThomas, B.R.Vishnu, S.P.Sivapirakasam (2019) An experimental investigation on pool boiling heat transfer enhancement using sol-gel derived nano-CuO porous coating, Exp. Therm. Fluid Sci, 103, 37-50.
Rohinikumar. Bandaru, C. Muraleedharan, M. V. Pavan Kumar, “Modelling and Dynamic Simulation of Solar-Thermal Energy Conversion in an Unconventional Solar Thermal Water Pump”, Renewable Energy, vol. 134, pp. 292-305, 2019.
2018
Rajesh T.N., Sarvoththama Jothi T.J. and Jayachandran T., Hot Test Studies in a Spark Ignited Vortex Combustion Chamber, Chemical Engineering Transactions, Vol. 71, pp. 1345-1350, 2018.
K.T. Ijas Hussain and T.J.S. Jothi, Vortex Ring Propagation and Interactions Studies, Sādhanā, Vol. 43:99, No. 7, pp 1-11, 2018.
J. Lijin and T.J.S. Jothi, Aerodynamic Characteristics of an Ogive-Nose Spinning Projectile, Sādhanā, Vol. 43:63, No. 4, pp 1-8, 2018.
Sundar R. Nath, M. Mubarak, A. Bhowmik, A. Shaija, Effect of photolimitation on growth of microalgae in Tubular photobioreactor, Journal of Advanced Engineering Research, Volume 5, Issue 1, 2018, pp.1-5.
S. Rajesh Kana, A. Shaija, K. Varun Sankar, Diesel Engine Characteristic Studies with Metal Oxide Doped Nanoparticle in Avocado Biodiesel, Journal of Advanced Engineering Research ISSN: 2393-8447 Volume 4, Issue 2, 2017, pp.114-118.
Rao S S L, Shaija A., Jayaraj S., Performance analysis of a transparent PEM fuel cell at the optimized clamping pressure applied on its bolts, Materials Today: Proceedings 5 (2018) 58–65.
M. Mubarak, A. Shaija, T.V Suchithra, Cost effective approach for production of Chlorella pyrenoidosa: A RSM based study, Waste and Biomass Valorization (2018) https://doi.org/10.1007/s12649-018-0330-x.
Gurrala Srinivasa Rao, A Shaija, Computational Analysis of Reacting Flows in Afterburner, Heat Transfer Engineering, Volume 41, Issues 5-6, November/December 2018
Balaji S and Saleel Ismail (2018). Production and use of HHO gas in IC engines, International Journal of Hydrogen Energy, 43(14), 7140-7154.
2017
Nitish kumar, T.J.S. Jothi, N. Selvaraju, Effect of Nanoparticle Deposition Rate on Critical Heat Flux in Pool Boiling, Journal of Engineering Research, Vol. 4, No. 4, 2017.
Jagadeesha T and T. J. Sarvoththama Jothi, Studies on the influence of process parameters on the AISI 316L resistance spot-welded specimens, International Journal of Advanced Manufacturing Technology, Vol. 93, No. 1–4, pp 73–88, 2017.
M. Mubarak, Priyank Gupta, A. Shaija, T.V. Suchithra, Production of Bioethanol from Salvinia Molesta and its Utilization in Single Cylinder SI Engine, Journal of Advanced Engineering Research, Volume 4, Issue 1, 2017, pp.67-72.
M. Mubarak, A. Shaija, T.V. Suchithra, Enhancement of Biomass Production of Chlorella pyrenoidosa using Response Surface Methodology, Journal of Advanced Engineering Research, Volume 4, Issue 2, 2017, pp.99-103.
Rohinikumar. B, C. Muraleedharan, “Performance prediction of Solar Thermal Water Pump Using Artificial Neural Networks”, International Journal of Thermal and Environmental Engineering, vol. 15, pp. 1-8, 2017.
2016
C.M. Shone and T.J.S. Jothi, Preparation of Gasification feedstock from leafy biomass, Environmental Science and Pollution Research, Vol. 23, No. 10, pp 9364–9372, 2016.
Mubarak. M, Shaija A, Suchithra T.V, Optimization of lipid extraction from Salvinia molesta for biodiesel production using RSM and its FAME analysis, Environmental Science and Pollution Research, July 2016, Volume 23, Issue 14, pp 14047–14055.
Mubarak M., Shaija A., Suchithra T.V., Ultrasonication: An effective pre-treatment method for extracting lipid from Salvinia molesta for biodiesel production, Resource-Efficient Technologies, September 2016, Volume 2, Issue 3, pp: 126-132.
2015
M. Mubarak, A. Shaija, T.V. Suchithra, A review on the extraction of lipid from microalgae for biodiesel production, Algal Research, (2015), Vol 7, pp 117-125.
Salumuri S. Lingeswara Rao, Shaija A, Jayaraj S. Metamodel optimization of operating parameters of a PEM fuel cell for maximum current density without membrane dehydration, International Journal on Power Engineering and Energy, Vol.6 (2), 2015, pp. 531-541.
Sayooj K. R. and Saleel Ismail (2015). CFD analysis of fluid flow and heat transfer in a solar water heater with corrugated pipe. International Journal of Applied Engineering Research, 10(68),34-39.
2014
Salumuri S. Lingeswara Rao, A. Shaija and S. Jayaraj. "Mathematical modeling of Proton Exchange Membrane Fuel Cells- a brief review". International Journal of Emerging Trends in Engineering and Development. Issue 4, Vol.1, 2014.
S.S.L. Rao, A. Shaija and S. Jayaraj. "Optimization of operating parameters to maximize the current density without flooding at the cathode membrane interface of a PEM fuel cell using Taguchi method and genetic algorithm". International Journal of Energy and Envoronment, Volume 5, 2014.
Salumuri S. Lingeswara Rao, A. Shaija and S. Jayaraj. "Theoretical prediction of the performance of a PEM Fuel Cell with consideration of the ageing effect on catalytic activity and conductivity of the membrane". International Journal of latest trends in Engineering and Technology, Volume 4(1). 2014
Ajeet P S and Shaija A, Design and development of a solar desalination system, Applied mechanics and Materials, Vol 592-594 (2014) pp 2350-2354
2013
T.J.S. Jothi and K. Srinivasan, Turbulent Mixing Noise from Underexpanded Non-circular Slot Jets, Acta Acustica United with Acustica, Vol. 99, No. 4, pp. 514-523, 2013.
T.J.S. Jothi and K. Srinivasan, Transonic resonance tones in orifice and pipe jets, International Journal of Aeroacoustics, Vol. 12, No. 1+2, pp. 103-122, 2013.
T.J.S. Jothi and K. Srinivasan, Surface roughness effects on noise from pipe jets, Journal of Sound and Vibration, Vol. 332, No. 4, pp. 839–849, 2013.
K. Srinivasan, T. Sundararajan, S. Narayanan, T.J.S. Jothi, C.S.L.V. Rohit Sarma, Acoustic Pyrometry in Flames, Measurement, Vol. 46, No. 1, pp. 315-323, 2013.
Saleel, C., A., Shaija, A., and Jayaraj, S. "On Simulation of Backward Facing Step Flow using Immersed Boundary Method", American Journal of Fluid Dynamics 2013, 3(2): 9-19.
Saleel, C., A., Shaija, A., and Jayaraj, S.,"Computational Simulation of Fluid Flow over a Triangular Step using Immersed Boundary Method", International Journal of Computational Methods August 2013, Vol. 10, No. 04
2012
Saleel, C., A., Shaija, A., and Jayaraj, S., Computational Simulation of Electroosmotic flow Using Immersed Boundary Method, International Journal of Micro-Nano Scale Transport, 2012.
Saleel, C., A., Shaija, A., and Jayaraj, S.," On the use of Thermal Effects as a Measure to Control Electro-osmotic Flows in Micro-channels", International Journal of Micro and Nano Systems, Vol. 3, No. 1, 2012, pp. 37-48.
2011
Shaija, A. and Narasimham, G.S.V.L., "Natural Convection in a Horizontal Annulus with an Inner Heat Generating Solid Square Cylinder and an Outer Isothermal Circular Boundary", international Journal of Computational Thermal Sciences, 3(2); 89-102 (2011).
Saleel, C., A., Shaija, A., and Jayaraj, S., Numerical Simulation of Fluid Flow over a Forward-backward Facing Step using Immersed Boundary Method, International Journal of Engineering Science and Technology, Vol. 3 No.10, 2011, pp. 7714-7729
2020
A. Kartheeswaran and T.J.S. Jothi, Analytical and numerical investigation on entrainment in jet flows, 1st online International Conference on Recent Advances in Computational and Experimental Mechanics 2020 (ICRACEM - 2020), Indian Institute of Technology Kharagpur, India, Sep. 4-6, 2020.
R Soundararajan and T J S Jothi, Acoustic emissions from a high-speed propeller, International Conference on Trends in Mechanical Engineering Sciences (ICTMES-2020), Malnad College of Engineering, Hassan, Karnataka, India Aug. 6-7, 2020.
Jayakrishna S, Abhishek Krishna Swamy, Pradeep M, Aditya Goyal, Santhose Krishna M, Karthik Jairam, Saleel Ismail and Feroskhan M (2019), Effect of injection location and operating speed on performance and emissions of a methane fuelled HCCI engine, International Conference on Innovations in Thermo-Fluid Engineering and Sciences (ICITFES – 2020), NIT Rourkela, (Accepted).
Prashant Dhar Dwivedi, Prashant Das, Hrushikesh V Bhalerao, Sumanth Samsani, Subham Balyan, Yasonandan Vadlamudi, Saleel Ismail and Feroskhan M, Effect of diesel-DEE blending on performance and emission characteristics of a biogas fuelled dual fuel engine, International Conference on Innovations in Thermo-Fluid Engineering and Sciences (ICITFES – 2020), NIT Rourkela, (Accepted).
Feroskhan M, Sreekanth Manavalla and Saleel Ismail, Exergy analysis of a biogas-diesel fuelled dual fuel engine, 12th International Exergy, Energy, and Environment Symposium, 22-26 March 2020, Hamad Bin Khalifa University, Qatar, (Accepted).
Feroskhan M, Saleel Ismail and Panchal Shreyash Hemant, Study of methane enrichment in a biogas fuelled HCCI engine, 12th International Exergy, Energy, and Environment Symposium, 22-26 March 2020, Hamad Bin Khalifa University, Qatar, (Accepted).
K Karunamurthy, Feroskhan M, Suganya G and Saleel Ismail, Predicting and optimizing the performance and emission characteristics of a dual fuel engine using machine learning model, 12th International Exergy, Energy, and Environment Symposium, 22-26 March 2020, Hamad Bin Khalifa University, Qatar, (Accepted).
Prashant Dhar Dwivedi, Prashant Das, Hrushikesh V Bhalerao, Sumanth Samsani, Subham Balyan, Yasonandan Vadlamudi, Saleel Ismail and Feroskhan M, Performance and emission characteristics of a biogas fueled dual-fuel engine with various DEE fractions, 12th International Exergy, Energy, and Environment Symposium, 22-26 March 2020, Hamad Bin Khalifa University, Qatar, (Accepted).
Sabareesh V, Milan K John, Muraleedharan C, Rohinikumar B, “Experimentation and Mathematical modelling: Indirect forced convection solar drying of tomato with novel drying chamber arrangement using phase change material as thermal energy storage”, International Conference on Intelligent Manufacturing and Energy Sustainability(ICIMES), August 2020, Hyderabad.
Aravind S, Milan K John, Rohinikumar B, Muraleedharan C, “Performance assessment of Banana drying using a Forced Convection Solar Dryer”, International conference on Sustainable Technology Applications for Green Engineering Solutions (STAGE 2020), July 2020, NSS College of Engineering, Palakkad, Kerala.
Sabareesh V, Milan K John, Muraleedharan C, Rohinikumar B, “Design and Analysis of a Novel Drying Chamber in indirect forced Convection Solar Drying”, International conference on Sustainable Technology Applications for Green Engineering Solutions (STAGE 2020), July 2020, Palakkad, Kerala.
2019
Arun M.G. and T.J. S. Jothi, Aerodynamic Noise Studies on the Flow around a Fixed Circular Cylinder, 46th National Conference on Fluid Mechanics and Fluid Power (FMFP-2019), PSG College of Technology, Coimbatore, India, Dec. 9-11, 2019.
Rahul S Arackal and T J S Jothi, Role of Surface Roughness on Acoustic Emissions from Wall Jets, 46th National Conference on Fluid Mechanics and Fluid Power (FMFP-2019), PSG College of Technology, Coimbatore, India, Dec. 9-11, 2019.
Sumesh C. K. and T. J. S Jothi, Trailing Edge Noise Characterization of Airfoil with Perforated Trailing Edge Extensions, 46th National Conference on Fluid Mechanics and Fluid Power (FMFP-2019), PSG College of Technology, Coimbatore, India, Dec. 9-11, 2019.
C.K. Sumesh and T.J.S. Jothi, Effect of Solid and Perforated Extension on Trailing Edge Noise of Airfoil, 26th International Congress on Sound and Vibration (ICSV 26), Montreal, Canada, 7-11 July 2019.
Rahul Narayanan C, T.J.S. Jothi and C.K. Sumesh, Flow and Acoustic Characteristics of NACA 0012 Airfoil, 1st National Conference on Advances in Mechanical Engineering (NCAME – 2019), NIT Delhi, March 16, 2019.
Avadesh Kumar and T.J.S. Jothi, Experimental Investigation of Flow-Induced Vibration in Two-Phase Flow, 1st National Conference on Advances in Mechanical Engineering (NCAME – 2019), NIT Delhi, March 16, 2019.
Vikash Kumar Dubey and T.J.S. Jothi, Flame Propagation studies of LPG-Air Mixture in a varying area Tube, 1st National Conference on Advances in Mechanical Engineering (NCAME – 2019), NIT Delhi, March 16, 2019.
Vikash Kumar Dubey and T.J.S. Jothi, Experimental Investigations of premixed flame characteristics of LPG-Air Mixture in Varying Area Cross-Section Tube, International Conference on Advancements in Mechanical Engineering (ICAME – 2019), Jyothi Engineering College Cheruthuruthy, Thrissur, April 10-11, 2019.
Muhammed Niyas M, A. Shaija, Effect of repeated heating of Coconut oil, Sunflower oil, and Palm oil on property of biodiesel produced from it, 3rd National Symposium on Shaping the Energy Future: Challenges & Opportunities (SEFCO 2019), May 2019
Chaitanya Ponnana, A. Shaija, Design and fabrication of compact retro-fittable diesel exhaust after-treatment system for reduction of PM and NOx, 3rd National Symposium on Shaping the Energy Future: Challenges & Opportunities (SEFCO 2019), May 2019
Feroskhan M, Saleel Ismail, Prashant Das and Prashant Dhar Dwivedi (2019). Investigations on performance, emission and combustion characteristics of methane in dual fuel and HCCI engines. 12th Asia Pacific Conference on Combustion - ASPACC 19, July 2019, Fukuoka International Congress Center, Japan.
Nihal Mishra, Shubham Mitra, Abhishek Thapliyal, Aniket Mahajan, Feroskhan M and Saleel Ismail (2019), Investigations on a biogas fuelled HCCI engine with DEE pilot injection at various locations. 11th International Exergy, Energy and Environment Symposium (IEEES'11-2019), July 2019, SRM Institute of Technology, Chennai.
Balu Jalindar Shinde, Karunamurthy Krishnasamy and Saleel Ismail (2019), The first and second law analysis of gasoline fuelled Electronic Fuel Injection Digital Three Spark Ignition (EFI- DTSI) engine. 2nd International Mechanical Engineering Congress (IMEC) 2019, November-December, NIT Trichy.
2018
Sumesh CK and T.J.S, Jothi, Experimental Investigation on the Effect of Airfoil Thickness on Aeroacoustic Characteristics of Symmetric Airfoils, Western Pacific Acoustic Conference, (WESPAC 2018), New Delhi, India, November 11-15, 2018
Rahul S Arackal and T.J.S, Jothi, Effect of Length Variation In Wall Jets on Noise Emissions, Western Pacific Acoustic Conference, (WESPAC 2018), New Delhi, India, November 11-15, 2018
Gurrala Srinivasa Rao, A. Shaija, Acoustic Analysis of Reacting Flows in Afterburner, Proceedings of the fifth international conferences on Computational Methods for Thermal Problems (Therma Comp 2018), Indian Institute of Science, Bangalore, India. July 9-11, 2018.
Gurrala Srinivasa Rao, A. Shaija, Acoustic Analysis of Non- Reacting and Reacting flows in Afterburner, MSC Software Simulating Reality Conference, ITC Grand Chola, Chennai, September 4-5, 2018
Gurrala Srinivasa Rao, A. Shaija, Acoustic Analysis of Non-Reacting Flows in Afterburner, Proceedings of 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP), IIT Bombay, December 10-12, 2018
Vipul Sehgal, A. Shaija, Design of Retrofittable Diesel Particulate Filter with Regeneration Attributes, First Shaastra Research Conference conducted in IIT Madras on 5th and 6th January 2018.
Vimal Kumar G.S, Robin James, A. Shaija, Development of a high productive solar still by enhancing evaporative mass transfer, First Shaastra Research Conference conducted in IIT Madras on 5th and 6th January 2018.
Vipul Sehgal, A. Shaija, Design and fabrication of Retrofittable Diesel Particulate Filter with Regeneration Attributes, 105th Indian Science Congress 2018, Manipur University, Canchipur, 16- 20th March 2018.
Abhishek Patil, Saleel Ismail, Suresh Kumar J. and Venugopal T. (2018). CFD simulation of ETV-EGR combined system for diesel engine intake. First International Conference on Energy and Environment: Global Challenges - ICEE 2018, March 2018, NIT Calicut.
2017
Rajesh Kumar and T.J.S, Jothi, Premixed Flame Propagation Studies in a Tube, 25th National Conference On Internal Combustion Engines and Combustion (NCICEC25), NITK Surathkal, India, December 15-17, 2017.
Arun M.G. and T.J.S, Jothi, Experimental Study of Noise Generated in Chevron Nozzles operating at Subsonic Flow Conditions, 44th National Conference on Fluid Mechanics and Fluid Power (FMFP 2017), Amrita Vishwa Vidhyapeetham, December 14-16, 2017.
Rahul S Arackal and T.J.S, Jothi, Experimental Study of Noise Emissions from Wall Jets, 44th National Conference on Fluid Mechanics and Fluid Power (FMFP 2017), Amrita Vishwa Vidhyapeetham, December 14-16, 2017.
Sumesh CK and T.J.S, Jothi, Aeroacoustic Characterization of NACA 0018 Airfoil, 44th National Conference on Fluid Mechanics and Fluid Power (FMFP 2017), Amrita Vishwa Vidhyapeetham, December 14-16, 2017.
Rajesh T.N., T.J. Sarvoththama Jothi and T. Jayachandran, Studies on Vortex Cooling of a Combustion Chamber, 44th National Conference on Fluid Mechanics and Fluid Power (FMFP 2017), Amrita Vishwa Vidhyapeetham, December 14-16, 2017.
Rahul, S Arackal and T.J.S, Jothi, Noise Emissions from Low Reynolds Number Wall Jets, The 46th International Congress and Exposition on Noise Control Engineering Taming Noise and Moving Quiet, INTER-NOISE 2017, Hong Kong Convention and Exhibition Centre, 27-30 August 2017.
Sumesh C.K. and T.J.S. Jothi, Flow Induced Noise Studies on a Porous Trailing Surface of a Flat Plate, 24th International Congress on Sound and Vibration (ICSV24), London, 23-27 July 2017.
Rahul S. Arackal and T. J. Sarvoththama Jothi, Aero-Acoustics Characteristics of Laminar Jets over a Flat Plate, 24th International Congress on Sound and Vibration (ICSV24), London, 23-27 July 2017.
Ijas Hussain and T.J.S. Jothi, Experiments on Vortex Rings: Interaction with Circular Surface, International Conference on Advances in Mechanical Engineering Sciences (ICAMES-17), P.E.S. College of Engineering, Mandya, 21-22 April, 2017.
Gurrala Srinivasa Rao, A. Shaija, Computational Analysis of Reacting flows in Afterburner, 1st International and 18th ISME Conference on Enabling Sustainable Development in Mechanical Engineering, February 23-25, 2017, NIT Warangal, Telangana, India.
Gurrala Srinivasa Rao, A. Shaija, Effect of Nozzle angle on Mach number of Afterburner in Jet aircraft, IEEE International Conference on Advances in Mechanical, Industrial, Automation and Management systems, MNNIT Allahabad, 3-5 February 2017.
Nived, A. Shaija, Shreenesh T.V, Design, modelling and experimental analysis on a novel concentrating PV integrated water purification hybrid PV/T system, International Conference on Advances of Mechanical Engineering Sciences(ICAMES), April 2017.
Johnson P. Joe, A. Shaija, Determination of length of a triple concentric tube heat exchanger, fabrication and experimental investigation on double tube heat exchanger, Internationl conference on advances of mechanical engineering sciences(ICAMES-17), April 21st and 22nd, 2017.
Sundar R. Nath, M. Mubarak, Arka Bhowmik, A. Shaija, Predictive model for microalgae growth in continious culture tubular photobioreactor: effect of light and temperature, ICHMT International Symposium on Advances in Computational Heat Transfer, May 28 -June 1, 2017, Napoli, Italy.
M. Mubarak, A. Shaija, T.V Suchithra, Optimization of ultrasonication method of pretreatment for extracting lipid from Chlorella pyrenoidosa for biodiesel production, 7th International Conference on Algae biomass, biofuels and bioproducts, Hyatt Regency, FL, USA, 18-21st June 2017.
Gurrala Srinivasa Rao, A. Shaija, Analysis of flow in afterburner, 24thNational and 2ndInternational ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), BITS Pilani, Hyderabad, 27-30, December,2017.
M. Mubarak, A.Shaija, T. V.Suchithra, Production, Characterization and Utilization of Biodiesel from Salvinia molesta, 25th National Conference on Internal Combustion Engines and Combustion (25NCICEC 2017), NIT Surathkal, 15-17, December 2017.
S. Rajesh Kana, A. Shaija, H. R Harikrishnan, and M. Hrishikesh, NOx Reduction Methods in Diesel Engine Using Waste Vegetable Oil Biodiesel, 25th National Conference on Internal Combustion Engines and Combustion (25NCICEC 2017), NIT Surathkal,15-17, December 2017.
Gurrala Srinivasa Rao, A. Shaija, Acoustic analysis of afterburner with liner for different air fuel ratios, 25th National Conference on Internal Combustion Engines and Combustion (25NCICEC 2017), NIT Surathkal, 15-17, December 2017.
Gurrala Srinivasa Rao, A. Shaija, Acoustic Analysis of Afterburner for different Nozzle Angles, 44th National Conference on Fluid Mechanics and Fluid Power Amrita University, Amritapuri Campus, Kollam, Kerala, , 14-16, December 2017.
2016
J. Lijin and T. J. S. Jothi, Spinning Effects on Aerodynamic Characteristics of a Tangent-Ogive Projectile, Proceedings of the 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, (FMFP2016), Paper No.87, December 15-17, 2016, MNNITA, Allahabad, U.P., India
Amit Thakan and T. J. S. Jothi, Effect of Jet Fluid Temperature on Submerged Round Vertical Water Jet, Proceedings of the 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, (FMFP2016), Paper No.163, December 15-17, 2016, MNNITA, Allahabad, U.P., India
Tank Dhaval kumar Ratan sinh and T.J. Sarvoththama Jothi, Experimental studies on premixed flame propagation of LPG-air mixture in a tube, Proceedings of National Conference on Energy, Economy and Environment, ENERGY 2016- Paper No. EN50, 16-17 December 2016, NIT Calicut, India
R. Nikhil, L.G. Kiran Kumar, and T.J.S. Jothi, Experimental and CFD analysis of pressure distribution around a circular cylinder for subcritical Reynolds number, Proceedings of National Conference on Energy, Economy and Environment, ENERGY 2016- Paper No. EN549, 16-17 December 2016, NIT Calicut, India
Rahul Kumar and T.J.S Jothi, Experimental Studies on Thermal Efficiency of Combustion in Porous Media, 2nd International Conference on Thermal, Energy and Environment (ICTEE), March 25-26, 2016, Kalasalingam University, Krishnankoil, Tamil Nadu, India
Rakesh L and T.J.S Jothi, Flow Characteristics of a Rectangular Jet, 2nd International Conference on Thermal, Energy and Environment (ICTEE), March 25-26, 2016, Kalasalingam University, Krishnankoil, Tamil Nadu, India
Mirji Omkar Ravindra, and T.J.S. Jothi, Propagation of Premixed Flame in an open-closed ends tube, 2nd International Conference on Thermal, Energy and Environment (ICTEE), March 25-26, 2016, Kalasalingam University, Krishnankoil, Tamil Nadu, India
T. Jayachandran, T.J. Sarvoththama Jothi, and Rajesh T.N., Experimental studies of a vortex combustion and cold wall chamber, 2nd International Conference on Thermal, Energy and Environment (ICTEE), March 25-26, 2016, Kalasalingam University, Krishnankoil, Tamil Nadu, India
P. Prasanth, M. Mubarak, A. Shaija, Effect of air sparging and Nitrogen on the growth and lipid accumulation of Chlorella pyrenoidosa, 2nd International Conference on Thermal, Energy and Environment (INCOTEE ), Kalasalingam University, Tamil Nadu, March 25&26, 2016.
K. Varun Sankar, S, Rajesh Kana, A. Shaija, Experimental optimization of Avocado oil methyl ester production and diesel engine performance study, 2nd International Conference on Thermal, Energy and Environment (INCOTEE ), Kalasalingam University, Tamil Nadu, March 25&26, 2016.
Anup Johson, A. Shaija, Theoretical prediction of pressure drop and under rib velocity of single serpentine and repetive five pass spiral flow fields for polymer electrolytic membrane fuel cells, 3rd International Conference on Developments in Science, Management and Engineering, International Organization of Scientific Research and Development, Trichy, 15 &16 April 2016.
Shreenesh, T.V., Shaija, A., Development of a solar milk pasteurization system for a dairy industry, ICTAK International Conclave on Skills, Engineering & Technology (ICSET), Technopark, Trivandrum, 24-25 June, 2016.
Tomson Sebastian, A. Shaija, Concentrated optical fibre based daylighting/thermal system ICTAK International Conclave on Skills, Engineering & Technology (ICSET), Technopark, Trivandrum, 24-25 June, 2016.
S S L Rao, A.Shaija, S. Jayaraj, Performance analysis of a transparent PEM fuel cell at the optimized clamping pressure applied on its bolts, International Conference on Processing of Materials, Minerals and Energy (PMME-2016), PACE Institute of Technology and Sciences, Ongole, Prakasam District, Andhra Pradesh, 29 & 30 July 2016.
Srinivasa Rao Gurrala and Shaija A, Computational Analysis of Fluid Flow in an Afterburner of Jet Aircraft, 6th International and 43rd National conference on Fluid mechanics and Fluid power, Motilal Nehru National Institute of Technology Allahabad, 15-17th December 2016
Tomson Sebastian, A. Shaija, Design and fabrication of novel Fresnel lens solar collector for daylighting and water heating, National Conference on Solar Thermal Energy Technologies, IIT Jodhpur, Rajasthan, 26-28 February, 2016.
Ashif S, A Shaija, Feasibilty study of small wind turbine for domestic refrigeration, National Conference on Energy, Economy and Environment, NIT Calicut, December 16-17, 2016.
M. Mubarak, Priyank Gupta, A. Shaija, T.V Suchithra, Production of bioethanol from Salvinia molesta and its utilization in single cylinder SI engine, National Conference on Energy, Economy and Environment, NIT Calicut, December 16-17, 2016.
M. Mubarak, A. Shaija, T.V Suchithra, Enhancement of biomass production of chlorella pyrenoidosa using response surface methodology, National Conference on Energy, Economy and Environment, NIT Calicut, December 16-17, 2016.
Johnson P Joe, A. Shaija, Effect of mass flow rate on the length of a triple concentric tube heat exchanger, National Conference on Energy, Economy and Environment, NIT Calicut, December 16-17, 2016.
Rajesh Kana S, A. Shaija, Varun Sankar K, Diesel engine characteristic studies with metal oxide doped nanoparticles in avocado biodiesel, National Conference on Energy, Economy and Environment, NIT Calicut, December 16-17, 2016.
S S L Rao, A Shaija, Optimization of torque applied on bolts to improve the performance of PEM fuel cell, National Conference on Energy, Economy and Environment, NIT Calicut, December 16-17, 2016.
Gurrala Srinivasa Rao, A Shaija, Computational analysis of reacting flows in afterburner for different air fuel ratios, National Conference on Energy, Economy and Environment, NIT Calicut, December 16-17, 2016.
Gurrala Srinivasa Rao, A. Shaija, Optimizing screech hole diameter of liner in afterburner, National Conference on Energy, Economy and Environment, ENERGY 2016, NIT Calicut, December 16-17, 2016.
Sundar R Nath, M. Mubarak, Arka Bhowmik, A. Shaija, Effect of photo-limitation on growth of microalgae in tubular photobioreactor, National Conference on Energy, Economy and Environment, ENERGY 2016, NIT Calicut, December 16-17, 2016.
Harikrishnan H.R, Hrishikesh M, Deepak V, Endana Saikrishna, Gulshan Kumar Jha, A. Shaija, Synthesis of biodiesel from waste cooking oil (WCO) and its characterization, National Conference on Energy, Economy and Environment, ENERGY 2016, NIT Calicut, December 16-17, 2016.
Nived, A. Shaija, Sreenesh T.V, Design of a concentrated PV integrated water purification system, National Conference on Energy, Economy and Environment, December 16-17, 2016.
Tomson Sebastian, A. Shaija, Experimental study on concentrated optical fibre based daylighting/thermal system, National Conference on Energy, Economy and Environment, NIT Calicut, December 16-17, 2016.
2015
Rajesh T.N., T.J. Sarvoththama Jothi and T. Jayachandran, 23rd National Heat and Mass Transfer and 1st International ISHMT-ASTFE Heat and Mass Transfer Conference, December 17-20, 2015, VSSC, Trivandrum, Kerala, India
Nithish Kumar, T.J.S. Jothi and N. Selvaraju, Critical heat flux study in nanofluids, 23rd National Heat and Mass Transfer and 1st International ISHMT-ASTFE Heat and Mass Transfer Conference, December 17-20, 2015, VSSC, Trivandrum, Kerala, India
V.M. Sreeradh, T.J.S. Jothi and S. Jayaraj, Flame Characteristics of a gasoline droplet in natural and forced convective environment, 23rd National Heat and Mass Transfer and 1st International ISHMT-ASTFE Heat and Mass Transfer Conference, December 17-20, 2015, VSSC, Trivandrum, Kerala, India
Pranit Himanshu Rana, T.J.S Jothi, L.G. Kiran Kumar, Scalar concentration characteristics of a free jet, 42nd National Conference on Fluid Mechanics and Fluid Power (FMFP2015), December 14-16, 2015, NITK Surathkal, Karnataka, India.
Rajesh T.N., T.J. Sarvoththama Jothi and T. Jayachandran, Cold Flow Investigation of flow behavior in a vortex combustion cold wall chamber, 42nd National Conference on Fluid Mechanics and Fluid Power (FMFP2015), December 14-16, 2015, NITK Surathkal, Karnataka, India
Pranit Himanshu Rana, T.J.S Jothi, L.G. Kiran Kumar, Experimental Investigation of Laminar Submerged Jet, 17th ISME conference on Advances in Mechanical Engineering, 3-4 October 2015, New Delhi, India.
T.J.S. Jothi and K. Srinivasan, Screech characteristics during mode change in underexpanded pipe jets, 22nd International Conference on Sound and Vibration (ICSV22), 12-16 July 2015, Florence, Italy.
Sreenesh Narayanan , A.Shaija, Fabrication and analysis of a solar parabolic trough collector for pasteurization of milk in a dairy industry, International Conference on New Frontiers in Chemical, Energy and Environmental Engineering(INCEEE- 2015),page no.211-12, NIT Warangal, 20-21 March,2015.
Priyank Gupta, M.Mubarak, A.Shaija, Production of bioethanol from Salvinia molesta using combined pre-treatment and hydrolysis with acids and distilled water, Proceedings of International Conference on New Frontiers in Chemical, Energy and Environmental Engineering(INCEEE- 2015), page no.101-02, NIT Warangal, 20-21 March, 2015.
Gurpreet Singh, A Shaija, Comparison of experimental and CFD analysis of a double pipe heat exchanger, Proceedings of International Conference on New Frontiers in Chemical, Energy and Environmental Engineering(INCEEE- 2015), page no.113-14, NIT Warangal, 20-21 March, 2015.
M. Mubarak, A.C Pradosh, A. Shaija, “Performance and Emission Analysis of Diesel Engine Using Microemulsion Blends Produced from Salviniamolesta”, 24th National conference on I.C engines and combustion, University of Petroleum and Energy Studies, Dehradun, Uttarakhand 30th Oct-1 Nov 2015.
Rajesh Kana, A. Shaija, R. P. S. Parihar, “Effect of the Magnetic Field on Fuel Consumption and Exhaust Emissions of Diesel Engine”, 24th National conference on I.C engines and combustion, University of Petroleum and Energy Studies, Dehradun, Uttarakhand 30th Oct-1 Nov 2015.
G. Srinivasa Rao, Kampa Ashirvadam, A. Shaija, “Acoustic Analysis of Screech liner for Mitigation of Instabilities in Afterburner”, 24th National conference on I.C engines and combustion, University of Petroleum and Energy Studies, Dehradun, Uttarakhand 30th Oct-1 Nov 2015
2014
CM Shone and TJS Jothi, Preparation of Gasification Feedstock from Leafy Biomass, International Conference on Environment and Energy (ICEE14), December 15-17, 2014, Jawaharlal Nehru Technological University, Hyderabad 500 085, India. Page: 68
Arun K.G, T.J.S. Jothi, S. Kumaravel Theoretical and Experimental Study of Magneto Hydrodynamic Propelled (MHD) Ship, National Conference on Latest Trends In Mechanical Engineering (NCLTME-2014), NSS College of Engineering, Palakkad, March 25-27, 2014.
G Gopi and T.J.S Jothi, Monte Carlo Simulation of Patterned Luminescent Solar Concentrator, National Conference on Renewable Energy Innovations for Rural Development (NCREIRD 2014), Rural Energy Centre, Gandhigram Rural Institute, 19 March 2014.
Ashutosh Sonawane, Ashok S, Sarvoththama Jothi T.J., Optimum Configuration of Busbar, Proceedings of International Conference on Advances in Engineering and Technology - ICAET 2014, Roorkee Institute of Technology, DOI: 10.15224/ 978-1-63248-028-6-03-98, 2014, Page: 492 – 496.
Ashif S and A Shaija, ’Development of a Dual Purpose Wind Turbine for Low Wind Speed Conditions,’ International Conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments (ICRAMID-2014) Ponjesly College Of Engineering, Nagercoil, Tamilnadu, India.
V Aneesh and A Shaija, ’Performance Analysis of Single Slope Solar Still Integrated with Thermoelectric Refrigeration System, International Conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments (ICRAMID-2014) Ponjesly College Of Engineering, Nagercoil, Tamilnadu, India.
Pradosh A C, Mubarak M and Shaija A, ‘Optimization Study on Extraction of Oil from Salvinia Molesta Using Response Surface Methodology, International Conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments (ICRAMID-2014) Ponjesly College Of Engineering, Nagercoil, Tamilnadu, India.
Salumuri S. Lingeswara Rao, A. Shaija and S. Jayaraj. Optimization of operating parameters to maximize the current density without dehydration at the anode membrane interface of a PEM fuel cell using Taguchi method. International Conference and Utility Exhibition on: Green Energy for Sustainable Development (ICUE 2014), March 19-21, 2014, Pattaya city, Thailand.
M. Mubarak, A. Shaija, T.V.Suchithra, Comparative study on pretreatment methods for extracting lipid from Chlorella pyrenoidosa for biodiesel production, International Symposium on Green and Sustainable Technology (ISGST-2014), UTAR Perak Campus, Malaysia , 30th Sep- 3rd Oct- 2014.
M. Mubarak, A. Shaija, T.V. Suchithra, Effective pretreatment method for lipid extraction from Salvinia molesta for biodiesel production, International Conference on Energy and Environment (ICEE-2014), JNTU Hyderabad, 15th Dec -17th-2014.
S. Rajesh Kana, A. Shaija, Synthesis and Characterisation of methyl ester of oil from waste Avocado for biodiesel exploration in India, International Conference on Energy and Environment (ICEE-2014), JNTU Hyderabad, 15th Dec -17th-2014.
Rohinikumar. B, C. Muraleedharan, “Performance Prediction of Solar Thermal Water Pump using Artificial Neural Networks”, International Conference on Energy and Environment(ICEE) , December 2014, JNTU, Hyderabad.
Rohinikumar. B, C. Muraleedharan, “Experimental Analysis of Solar Thermal Water Pump”, International conference on Electrical, Electronics, Engineering trends, Communication, Optimization and Sciences, October 2014, Vijayawada.
2013
T.J.S. Jothi and K. Srinivasan, Surface roughness effects on jet noise emissions, Acoustics 2013, organized by the Acoustical Society of India (ASI) and the French Acoustical Society (SFA) under the aegis of the CSIR-National Physical Laboratory, pp. 34-39, New Delhi, 10-15, November 2013.
T.J.S. Jothi and K. Srinivasan, Characteristics of screech and transonic tones in jet flows, The 20th International Conference on Sound and Vibration (ICSV 2013), Bangkok, Thailand. 7-11 July 2013.
S. Sreejith, M. Mubarak, A. Shaija, T.V. Suchitra, Experimental study on the properties of biodiesel produced from indigenous algae as diesel engine fuel, International conference on Alternate fuels in I.C. engines, MNIT Jaipur, 2013.
S. Mithun, M. Mubarak, A. Shaija, T.V. Suchitra, Experimental investigation of biohydrogen production from Indigenous algae and Chlorella Pyrenoidosa, IEEE International Conference on Energy Efficient Technologies for Sustainability ICEETS-2013.
Salumuri. S. Lingeswara Rao, A.Shaija, Mathematical Modeling and Performance analysis of Proton Exchange Membrane fuel cell, IEEE International Conference on Power, Energy and Control (ICPEC), 2013.
Salumuri. S. Lingeswara Rao, A.Shaija, Mathematical Modeling and Parametric analysis of Proton Exchange Membrane fuel cells-A Semi Empirical Approach, International conference on Alternate fuels in I.C. Engines, MNIT Jaipur, 2013.
M.Mubarak, A. Shaija, T.V.Suchithra, Performance and Emission Analysis of Diesel Engine using Biodiesel blends Produced from Salvinia Molesta and Indigenous Algae, 23rd National conference on IC Engines and Combustion in SVNIT Surat, India, 13-16 December, 2013.
2012
A.Shaija and GSVL Narasimham," Numerical Investigation of the Temperature and Flow Distributions and Development of Correlations in the Annulus" in ICFMHTT 2012 : International Conference on Fluid Mechanics, Heat Transfer and Thermodynamics, in Zurich, Switzerland during Jan 15-17, 2012.
Saurabh Srivastava, A. Shaija: “Mathematical Modeling and Simulation Analysis of PEM Fuel Cell”, International Conference on Electronics and Communication Engineering- ECE 2012, May 20th 2012, IIMT Bhubaneswar. pp 179-185.
K.Sai Santhosh, A. Shaija: “Detoxification of Dairy Waste Water By Using Compound Parabolic Concentrator (CPC) And Oxidising Agent”, International Joint conference on Emerging Intelligent Sustainable Technologies-EISTCON-2012, May 3-4th 2012,Dayanand Sagar College of Engineering Bangalore. pp 23-28.
Saurabh Srivastava, C. Muraleedharan, A. Shaija: “Solar Dryer and Its Performance Analysis”, National Conference on Recent Trends in Engineering and Science- NCRTES 2012, April 20-21st 2012, Prestige Institute of Engineering and Science, Indore, M.P. pp 22-27.
K.Sai Santhosh, C. Muraleedharan, A. Shaija: “Modeling of Solar Thermal Energy Storage System by Using PCM as a Storage Material”, National Conference on Recent Trends in Engineering and Science- NCRTES 2012, April 20-21st 2012, Prestige Institute of Engineering and Science, Indore, M.P. pp 28-32.
Neethu Kailas, A. Shaija: “Performance Analysis of a Portable Solar Powered Thermoelectric Cooler”, National Conference on Advances in Mechanical Engineering- NCAME 2012, April 21st 2012, R. C. Patel Institute of Technology, Shirpur.
Neethu kailas and A. Shaija “Thermal modeling and experimental analysis on a stepped basin solar still with jute cloth as energy storage medium”, emerging trends in mechanical engineering (ETME 12), June 1, ITM university, Gurgaon, Haryana,India
Saleel, C., A., Shaija, A., and Jayaraj, S., : Numerical Simulation of Pressure Driven Electro-osmotic Flow and Mixing in a Rectangular Micro-Channel Populated with Triangular Blocks, 39th National Conference on Fluid Mechanics and Fluid Power, 2012, SVNIT, Surat, India
2011
S. Jayaraj, A. Shaija, and C.A. Saleel, Computational Simulation of Backward Facing Step Flow Using Immersed Boundary Method, International Conference on Scientific Computing as a part of WORLDCOMP'11WORLD COMP 2011, LAS VEGAS, July 18-22, 2011.
Saleel, C., A., Shaija, A., and Jayaraj, S., : Joule Heating Effect as a Measure to Control Electro-osmotic Channel Flows, Proceedings of 21st National and 10th ISHMT and ASME Heat and Mass Transfer Conference, December 2011, IIT Madras, Chennai, India.
J.Nagaraju, S.VamsiKrishna, S. Ashok, A.Shaija: “Hybrid Photovoltaic-Thermosyphon Water Heating system”, National conference on Emerging research and advances in mechanical sciences – ERA 2011, March 23rd 2011, Velammal Engineering College, Chennai. pp 379-385.
Saleel, C., A., Shaija, A., and Jayaraj, S., : Modeling and Simulation of Fluid Flow over a Rectangular Step using Immersed Boundary Method, Proceedings of the National Conference on Emerging TRends in Industrial Engineering and Management (ETRIM2011), July 2011, Department of Mechanical Engineering, NIT Calicut, Kerala, India
2010
A. Shaija and G. S. V. L. Narasimham, "Conjugate natural convection in non-circular horizontal annulus" in 20th National & 9th International ISHMT-ASME Heat and Mass Transfer Conference, to be held in January 4 - 6, 2010, Mumbai.
C.A.Saleel, A.Shaija and S. Jayaraj, 'Numerical simulation of laminar flow between parallel plates using Immersed Boundary method', International Conf. on Recent Advances in Mechanical Engineering (ICRAME, 2010) , NI University, Nagercoil, Tamilnadu, India.
P. Naresh Babu and A. Shaija, "Theoretical modeling of solar thermal energy storage system using Inorganic phase change materials" in National level Technical Conference on Energy, ENERGETIC 2010, Bangalore.
Gunasekhar kesetty, S. Ashok and A. Shaija, "Modelling and analysis of Automotive Fuel Cell" in National level Technical Conference on Energy, ENERGETIC 2010, Bangalore.
Ningegowda B. M, A. Ramaraju and A. Shaija, Golden Jubilee National Conference on “Analysis of Forced Air Cooling Techniques for Low Power Density Electronic Devices ”June 11 - 12, 2010, NIT Jamshedpur India.
2009
A. Shaija and G. S. V. L. Narasimham, "Conjugate Natural Convection In the Space Formed Between Two Concentric Circular Cylinder" in National Conference in Recent Developments in Mechanical Engineering, RDME-2009, 5-6 March, SCTCE, Trivandrum.
A. Shaija and G. S. V. L. Narasimham, "Analysis of Temperature and Flow Distribution in the Non-Circular Annulus between Two Cylinders" in National Woman's Conference on Exploring Potentialities of Woman in Engineering (EPWIE), July 3-4, 2009, CIT-Changa, Gujarat.
2008
Shaija, A. and Narasimham, G.S.V.L., "Natural Convection In Horizontal Annulus Formed Between An Inner Solid Square Cylinder Placed Concentrically Inside An Outer Circular Isothermal Boundary", in CHT-08: ICHMT International Symposium on Advances in Computational Heat Transfer, May 11-16, 2008, Marrakech, Morocco.
A. Shaija and G. S. V. L. Narasimham, "Conjugate Natural Convection in a Horizontal Annulus Driven by Inner Heat Generating Solid Cylinder" in 19th National & 8th International ISHMT-ASME- Heat and Mass Transfer Conference on January 3-5, 2008 JNTU, Hyderabad.