Research

• Fault diagnosis in gear using wavelet envelope power spectrum

M Lokesha, MC Majumder, KP Ramachandran, KFA Raheem

International Journal of Engineering, Science and Technology 3 (8), 156-167

• Application of Laplace wavelet kurtosis and wavelet statistical parameters for gear fault diagnosis

P Chandran, M Lokesha, MC Majumder, KFA Raheem

International journal of multidisciplinary sciences and engineering 3 (9), 1-7

• Fault Diagnosis in Belts using Time and Frequency based Signal Processing Techniques

GRRML Abdulrahman Abdulshakoor Al Bulushi

International Journal of Multidisciplinary Sciences And Engineering 6 (11 …

• A review: Mechanical Properties of HSS Steel by deep Cryo-Treatment

LH Manjunatha, M Lokesha, BS Ajaykumar

IOP Conference Series: Materials Science and Engineering 376 (1), 012098

• Fault diagnosis in gears using Laplace wavelet kurtosis

M Lokesha, MC Majumder, KP Ramachandran, KFA Raheem

International conference on Challenges and opportunities in mechanical …

• Review on Condition Monitoring of Bearings using vibration analysis techniques.

MV KiranKumar, M Lokesha, S Kumar, A Kumar

IOP Conference Series: Materials Science and Engineering 376 (1), 012110

• Laplace and Morlet Wavelet Analysis for Gear. Fault Diagnosis: A Comparative Study

ML Praneethchandran, MC Majumder, KP Ramachandran

International Journal of Innovative Technology and Exploring Engineering …

• Investigation of machinability characteristics on C45 steel with cryogenically treated M2 HSS tool using statistical technique

S Kumar, MR Ahmed, M Lokesha, LH Manjunath

International Journal for Simulation and Multidisciplinary Design …

• Vibration based Fault Diagnosis Techniques for Rotating Mechanical Components

S Kumar, M Lokesha, K Kumar, KR Srinivas

IOP Conference Series: Materials Science and Engineering 376 (1), 012109

• Wavelet Enveloped Power Spectrum and Optimal Filtering For Fault Diagnosis in Gear

M Lokesha, MC Majumder, KP Ramachandran, KFA Raheem

International Journal of Scientific Engineering and Technology 2 (7), 656-664

• Fault Diagnosis in Belt Transmission Using Wavelet Enveloped Spectrum

S Kumar, M Lokesha, MVK Kumar, CG Ramachandra

IOP Conference Series: Materials Science and Engineering 1013 (1), 012025

• Investigating the Impact of Deep Cryogenic Treatment on Surface Roughness and Cutting Force in Turning C45 Steel

MR Ahmed, M Lokesha, LH Manjunath

Materials Today: Proceedings 24, 1190-1198

• Design of efficient powertrain system for a motorsports race car using a bike engine.

KM Ramesh, VM Naik, M Lokesha

IOP Conference Series: Materials Science and Engineering 376 (1), 012102

• Design of Effective Hydraulic Braking System for Formula Motorsport Car

VM Naik, KM Ramesh, M Lokesha

IOP Conference Series: Materials Science and Engineering 376 (1), 012101

• INVESTIGATION OF MACHINABILITY CHARACTERISTICS ON C45STEELWITH CRYOGENICALLY TREATED HSS TOOL FOR CUTTINGFORCE ANDTEMPERATURE USING STATISTICAL TECHNIQUE

LM 25. Santosh Madival, Mohammed Riyaz Ahmed

International Journal of Modern Manufacturing Technologies 10, 67-75

• FUZZY LOGIC AND REGRESSION MODELLING OF MACHINING PARAMETERS IN TURNING USING CRYO-TREATED M2 HSS TOOL

LM Santosh, Mohammed Riyaz Ahmed, Manjunatha L. H

International Journal of Mechanical Engineering and Technology 9 (10), 200–210

• The performance optimization of deep cryogenically treated M2 HSS tool in turning of C45 steel for hardness and MRR

LM Santosh, Mohammed Riyaz Ahmed, Manjunatha L. H

International Journal of Mechanical and Production Engineering Research and …

• Investigating the Impact of Deep Cryogenic Treatment on Surface Roughness and Cutting Force in Turning C45 Steel

MLH Santosha, Mohammed Riyaz Ahmed , Lokesha M

Materials Today: Proceedings, science direct, ElSEVIER publication.

• Fault Diagnosis in Belt Drive Transmission using Wavelet Spectrum

US Sujesh Kumar , M Lokesha, Akshatha G K , Balaji K N , N Raghavendra

International Journal of Innovative Research in Science, Engineering and …

• A Review on Automatic Fault Detection and Diagnosis in a Single Point Cutting Tool Using Wavelet Analysis

M Santosh, M Lokesha, L HManjunath, M Moodbidre

• Arduino based real time driver drowsiness detection and mobile alert system using Bluetooth

LM Lestin Jills Joseph

International Journal Of Engineering And Computer Science 5 (6), 18106-18111

• Determination of Fracture Toughness in Tensile Fracture and Fatigue Fracture of Steels

VR Neelakantha V. Londe,T Jayaraju,CR Rajashekar, T K Chandrashekar,Lokesha M

International Conference on Aeronautical, Robotics and Manufacturing …

• Integrated System Using 3 DOF Robotic Lamps Along With SMS Alert

LM Priya Priya s. Nandral

International Journal of Electrical and Electronics Research 3 (2), 378-382

• Fault Detection and Diagnosis in Gears Using Wavelet Analysis Techniques and Comparison on their Diagnostic Capability

M Lokesha, MC Majumder, KP Ramachandran

Applied Mechanics and Materials 789, 587-591

• FAULT DETECTION AND DIAGNOSIS INGEARS USING WAVELET ENVELOPED POWER SPECTRUM AND ANN

M Lokesha, MC Majumder, KP Ramachandran, KFA Raheem

International Journal of Research in Engineering and Technology 9, 146-158

• Application of wavelet analysis and ANN for fault diagnosis of gears

KFAR Praneeth Chandran, Nabeel Ahmed, Lokesha M

Proceedings of the 3rd International Conference on Production Energy and …

• Performance evaluation of deep cryotreated M2 HSS cutting tool material during turning of C45 steel

LH Manjunath, M Lokesha, Bengaluru

Journals

1. S M. Shahabaz, Nagaraja Shetty, S. Divakara Shetty and Nanjangud Subbarao Mohan (2020). Comparative Study of Mechanical Properties of Titanium Alloy Fabricated By DMLS with Casted Titanium Alloy and Natural Teeth. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 10 (special issue), 311–322.

2. Suraj Louis D’cunha, Nagaraja Shetty and Divakara Shetty S (2020). Review on the Influence of Fused Deposition Modelling and Injection Moulding Techniques on Enhancement of Mechanical Properties of Abs Material. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 10 (special issue), 226–236.

3. N. Hariharanath, Nagaraja Shetty and Divakara Shetty S (2020). A Review on Polymer Processing Technology of Thermoplastic Materials. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 10 (special issue), 292–301.

4. S.M. Shahabaz, Nagaraja Shetty, S Divakara Shetty and S.S. Sharma (2020). Surface Roughness Analysis in the Drilling of Carbon Fiber/Epoxy Composite Laminates using Hybrid Taguchi-Response Experimental Design. Materials Research Express (MRX), 7(1), 1-12.

5. S Divakara Shetty and Nagaraja Shetty (2019). Investigation of Mechanical Properties and Applications of Polylactic Acids—A Review. Materials Research Express (MRX), 6(11), 1-16.

6. Tejas Gupta, Siddhanth Shetty, Nagaraja Shetty and Divakara Shetty S (2019). A Review on Metallic Dental Materials and Its Fabrication Techniques. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 9(5), 491–510.

7. Divakara Shetty S and Nagaraja Shetty (2019). A Literature Review on Processing and Testing of Mechanical Properties of Hybrid Composites using Graphene/Epoxy with Alumina. International Journal of Mechanical Engineering and Technology (IJMET), 10(3), 1263–1274.

8. Nair, Moorthy M and Shetty, Nagaraj and Shetty, Divakara S and Kamath, Shambhavi M (2018) Effect of Distilled and Sea Water Absorption on Mechanical Behaviour of Short Coir Fibre Epoxy Composite/Sawdust Filler. Pertanika Journal of Science and Technology, 26 (1). pp. 261-282. ISSN 01287680

9. Nair, Moorthy M and Shetty, Nagaraj and Alva, Pancham P and Shetty, Divakara S (2018) Effect of sawdust impregnation on long coir fibers reinforced with epoxy matrix. International journal of Advanced and Applied Science, 5 (3). pp. 67-74. ISSN 2313-3724

10. Shetty, Divakara S and Shetty, Nagaraj and Rajat, Apurv and Shetty, Geet (2017) Characterization of Machining Parameters on Thrust Force and Surface Roughness in Drilling of 40-60 Wt. % BD CFRP Composite. International Journal of Applied Engineering Research, 12 (16). pp. 5570-5577. ISSN 0973-4562

11. Shetty, Divakara S and Rajat, Apurv and Shetty, Geet and Patil, Prathamesh (2017) The Effect of Machining Parameters on Drilling Induced Delamination of Carbon Fiber Reinforced Polymer Composite. International Journal of Applied Engineering Research, 12 (19). pp. 8286-8293. ISSN 0973-4562.

12. Shetty, Divakara S and Dmello, Shawn Dmello and Alva, Pancham P and Shetty, Siddhanth R (2017) Experimental Analysis of Mild Steel Corrosion in Aqueous Medium. International Journal of Applied Engineering Research, 12 (21). pp. 11288-11293. ISSN 0973-4562

13. Shetty, Divakara S and Herle, Ramadev and Shetty, Nagaraj (2017) Experimental Study on Corrosion Inhibition of 304 SS in Acid Solution. International Journal of Applied Engineering Research, 12 (22). pp. 12892-12898. ISSN 0973-4562

14. Shetty, Divakara S and Shetty, Nagaraj (2017) Inhibition of mild steel corrosion in acid medium. International Journal of Technology, 8 (5). pp. 909-919. ISSN 2086-9614

15. Shetty, Divakara S and Shetty, Nagaraj and Parvaz, Faiz and Agnihotri, Karthik and Mewawala, Parthiv (2017) Investigating the Inhibiting Action of Thiourea Derivative on Mild Steel Corrosion in Acid Medium. International Journal of Applied Engineering Research, 12 (12). pp. 3237-3242. ISSN 0973-4562

16. Shetty, Divakara S and Rajat, Apurv and Shetty, Geet and Patil, Prathamesh (2017) Surface Roughness Analyses in Drilling of CFRP Composite. International Journal of Applied Engineering Research, 12 (20). pp. 9493-9499. ISSN 0973-4562

17. Shetty, Nagaraj and Shahabaz, M and Sharma, S S and Shetty, Divakara S (2017) A review on finite element method for machining of composite materials. Composite Structures, 176 (1). pp. 790-802. ISSN 0263-8223

18. Kini, Achutha U and Sharma, S S and Jagannath, K and Prabhu, P R and Bhat, Chandrashekhar and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M (2016) Comparative Study of EPHO and CBTC as Corrosion Inhibitors for 15 vol. % 6061 al Alloy/SiCp Composite in 1 M Hydrochloric Acid Medium. International journal of industrial and Mechanical Engineering Sciences, 2 (1). pp. 5-9.

19. Shetty, Divakara S and Shetty, Nagaraj (2016) Electrochemical corrosion of low carbon steel in a hydrochloric acid medium.International Journal of Technology. pp. 531-541. ISSN 2086-9614

20. Joshi, Mukund and Shetty, Nagaraj and Shetty, Divakara S and Bharath, N L S and Varma, Chanakya S (2016) Mechanical Characterization of Additive Manufacturing Processes. Indian Journal of Science and Technology, 9 (36). ISSN 0974-5645

21. Shetty, Nagaraj and Herbert, Mervin A and Shetty, Raviraj and Shetty, Divakara S and Vijay, G S (2016) Soft computing techniques during drilling of bi-directional carbon fiber reinforced composite. Applied Soft Computing, 41 (41). pp. 466-478. ISSN 1568-4946

22. Shetty, Nagaraj and Herbert, Mervin A and Shetty, Divakara S and Vijay, G S and Shetty, Raviraj and Shivamurthy, B (2015)Experimental Investigation in Drilling of Carbon Fiber Reinforced Polymer Composite using HSS and Solid Carbide Drills.International Journal of Current Engineering and Technology, 5 (1). pp. 313-320. ISSN 2277 – 4106

23. Shetty, Nagaraj and Shetty, Divakara S and Vijay, G S and Shetty, Raviraj (2015) Mechanical Characterization and Evaluation of Delamination of Polymer Composite Laminate. International Journal of Applied Engineering Research, 10 (15). pp. 35757-35769. ISSN 0973-4562

24. Shetty, Raviraj and Denim, Anajwal and Revankar, Goutam D and Rao, Srikanth S and Shetty, Divakara S (2014)Characterization of Microstructure and Tribological Study on Heat Treated Titanium alloy (Ti-6Al-4V). International Journal of Current Engineering and Technology, 4 (3). pp. 2183-2188. ISSN 2277 – 4106

25. Shetty, Raviraj and Jose, Tony K and Revankar, Goutam D and Rao, Srikanth S and Shetty, Divakara S (2014) Surface Roughness Analysis during Turning of Ti-6Al-4V under Near Dry Machining using Statistical Tool. International Journal of Current Engineering and Technology, 4 (3). pp. 2061-2067. ISSN 2277 – 4106

26. Shetty, Nagaraj and Herbert, Mervin A and Shetty, Divakara S and Vijay, G S and Shetty, Raviraj (2014) Evaluation Of Drilling Induced Delamination Of Carbon Fiber Reinforced Polymer Composite Using Solid Carbide Drills. European Scientific Journal, 10 (15). pp. 279-292. ISSN 1857- 7431

27. Shetty, Pradeep Kumar and Shetty, Raviraj and Shetty, Divakara S (2014) Machinability Study on Dry Drilling of Titanium Alloy Ti-6Al-4V using L9 orthogonal array. Procedia Material Science, 5. pp. 2605-2614.

28. Shetty, Nagaraj and Herbert, Mervin A and Shetty, Divakara S and Vijay, G S and Shetty, Raviraj (2013) Investigation into the Effects of Process Parameters on Surface Roughness in Drilling of BD-CFRP Composite Using HSS Twist Drills.International Journal of Current Engineering and Technology, 3 (4). pp. 1320-1326. ISSN 2277 – 4106

29. Shetty, Nagaraj and Herbert, Mervin A and Shetty, Divakara S and Vijay, G S and Shetty, Raviraj (2013) Evaluation of thrust force in drilling of BD-CFRP composite using taguchi analysis, response surface methodology and neural network. European Scientific Journal, 9 (27). pp. 147-164. ISSN 1857- 7431

30. Shetty, Nagaraj and Herbert, Mervin A and Shetty, Divakara S and Shetty, Raviraj and Shivamurthy, B (2013) Effect of Process Parameters on Delamination, Thrust force and Torque in Drilling of Carbon Fiber Epoxy Composite. Research Journal of Recent Sciences, 2 (8). pp. 47-51. ISSN 2277-2502

31. Shetty, Nagaraj and Herbert, Mervin A and Shetty, Divakara S and Shetty, Raviraj and Murthy, B R N (2013) Investigation Into The Effects Of Process Parameters On Delamination During Drilling Of Bd-Cfrp Composite Using Taguchi Design Of Experiments And Response Surface Methodology. International Journal Of Mechanical Engineering And Technology , 4 (3). pp. 136-148. ISSN 0976 – 6359

32. Kini, Achutha U and Jagannath, K and Sharma , S S and Bhat, Chandrashekhar and Shetty, Prakash and Shetty, Divakara S(2013) Effect of Ethyl-2-phenyl-hydrozono-3-oxobutyrate on the Corrosion inhibition of AA 6061 in HCl medium. International Journal of Research in Engineering and Technology (IJRET), 2 (3). pp. 132-136. ISSN 2277 – 4378

33. Herle, Ramadev and Shetty, Prakash and Shetty, Divakara S and Kini, Achutha U (2013) Inhibition of corrosion of stainless steel (304 SS) by N-(2-mercaptophenyl)-N’-phenyl thiourea in hydrochloric acid. Indian Journal of Chemical Technology, 20 (5). pp. 317-322. ISSN 0975-0991

34. Umananda, K V and Shetty, Divakara S and Sharma , S S (2013) Study of Mechanical and Corrosion Properties of AISI 50110 (EN31) Steel with and without Heat Treatment. International Journal of Mechanical Engineering & Research, 3 (5). 396 -400. ISSN 2249 – 0019

35. Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M (2012) Corrosion Inhibition of 6061 Al alloy– 15 vol% SiC(p) Composite in 0.5 M Hydrochloric Acid Solution. International Journal of Biological, Ecological and Environmental Sciences (IJBEES), 1 (3). pp. 77-81. ISSN 2277 – 4394

36. Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M and Herle, Ramadev (2012) The Inhibition Action of Ethyl-2 Phenyl Hydrozono-3 Oxobuyrate on the Corrosin of 6061 Al Alloy\Sicp Compposite in Hydrochloric Acid medium OXOBUTYRATE ON THE CORROSION OF 6061 Al ALLOY/SiCp COMPOSITE IN HYDROCHLORIC ACID MEDIUM. Journal of the Chilean Chemical Society, 54 (5). pp. 331-334. ISSN 0717-9707

37. Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Herle, Ramadev (2012) Propanoyl(1Z)-N-(2,6-dimethylphenyl)-2- oxopropanehydrazonoate as inhibitor for corrosion of 6061 Al alloy15 % (v)SiC(p) composite in hydrochloric acid media hydrochloric acid media. IIUM Engineering Journal, 13 (2). ISSN 1511-788X

38. Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M (2011) Corrosion inhibition of 6061 aluminium alloy/SiCp composite in hydrochloric acid medium using 3-chloro-1-benzothiophene-2-carbohydrazide. Indian Journal of Chemical Technology, 18. pp. 439-445. ISSN 0971-457X

39. Shivamurthy, B and Anandhan, S and Bhat, Udaya K and Shetty, Divakara S (2011) Fretting wear performance of glass/epoxy composites. Manufacturing Technology Today, 1. pp. 17-21.

40. Herle, Ramadev and Shetty, Prakash and Shetty, Divakara S and Kini, Achutha U (2011) Corrosion Inhibition of 304 SS in Hydrochloric Acid Solution by N – Furfuryl N'– Phenyl Thiourea. Portugaliae Electrochimica Acta, 29 (2). pp. 69-78. ISSN 1647-1571

41. Herle, Ramadev and Shetty, Divakara S and Kini, Achutha U and Shetty, Prakash (2011) Inhibiting Effect of N-cyclohexyl-N0-phenyl Thiourea on the Corrosion of 304 SS in Hydrochloric Acid Solution. Chemical Engineering Communications, 198 (1). pp. 120-130. ISSN 0098-6445

42. Herle, Ramadev and Shetty, Prakash and Shetty, Divakara S and Kini, Achutha U (2011) Corrosion Inhibition of Stainless Steel in Hydrochloric Acid by N - (2-mercaptophenyl) -N/ -phenyl Thiourea. International Journal of Chemistry and Applications, 3 (2). pp. 151-158. ISSN 0974-3111

43. Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M (2010) Corrosion Inhibition of 6061 Al alloy–15 vol% SiC(p) Composite in 0.1 M Hydrochloric Acid. Journal of the Chilean Chemical Society, 55 (1). pp. 56-60. ISSN 0717-9707

44. Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M and Herle, Ramadev (2010) Corrosion inhibition behaviour of N-Naphthyl-N'-Phenyl Thiourea on 6061 Al Alloy/SiCp composite in hydrochloric acid medium.International Journal of Contemporary Science, Engineering and Technology, 1 (1-2). pp. 1-3.

45. Herle, Ramadev and Shetty, Prakash and Shetty, Divakara S and Kini, Achutha U (2010) Corrosion inhibition of 304 ss in hydrochloric acid solution by n-cyclohexyl-n'-phenyl thiourea. International journal of Contemporary Science, Engineering and Technology, 1 (1). pp. 39-42.

46. Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M and Herle, Ramadev (2010) The Inhibition action of Ethyl-2-Phenyl Hydrozono-3-Oxobutyrate on the corrosion of 6061 Al alloy/SiCp Composit in Hydrochloric acid medium. Journal of Chilean Chemical Society, 54 (1). pp. 331-335. ISSN 0717-9707

47. Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M and Herle, Ramadev (2010) The inhibition action of ethyl-2-phenyl hydrozono-3-oxobutyrate on the corrosion of 6061 al alloy/sicp composite in hydrochloric acid medium. Journal of Chilean Chemical Society, 55 (1). ISSN 0717-9707

48. Herle, Ramadev and Shetty, Prakash and Shetty, Divakara S and Kini, Achutha U (2009) N-benzyl-N1-phenyl Thiourea as Corrosion Inhibitor for 304SS in Hydrochloric Acid Solution. Journal of Metallurgy and Materials Science, 51 (2). ISSN 0972-4257

49. Shetty, Divakara S and Shetty, Prakash (2008) Inhibition of mild steel corrosion in acid media by N-benzy1-N-pheny1 thiourea. Indian Journal of Chemical Technology, 15 (3). pp. 216-220. ISSN 0971-457X

50. Shetty, Divakara S and Shetty, Prakash and Nayak, Sudhaker H V (2007) The inhibition action of N-(furfuryl)-N′-phenyl thiourea on the corrosion of mild steel in hydrochloric acid medium. Materials Letters, 61 (11-12). pp. 2347-2349. ISSN 0167-577X

51. Shetty, Divakara S and Shetty, Prakash and Nayak, Sudhakar H V (2006) Inhibition of Mildsteel Corrosion in Acid Media By N-(2-Thiophenyl)-N-Phenyl Thiourea. Journal of the Chilean Chemical Society, 51 (2). pp. 849-854. ISSN 0717-9707

52. Shetty, Divakara S and Shetty, Prakash and Nayak, Sudhaker H V (2006) The inhibition action of N-(furfuryl)-N'-phenyl thiourea on the corrosion of mild stell in acid media. Journal of the Serbian Chemical Society, 71 (10). pp. 1073-1082. ISSN 1820-7421

53. Shetty, Divakara S and Shetty, Prakash and Nayak, Sudhaker H V (2005) Inhibition of Corrosion of mild steel in hydrochloric acid by N-cyclohexy1-N-pheny1 thiourea. Indian Journal of Chemical Technology , 12 (4). pp. 462-465. ISSN 0971-457X

54. Shetty, Prakash and Shetty, Divakara S and Nayak, Sudhakar H V (2005) Inhibition of corrosion of mild steel in hydrochloric acid by N-cyclohexyl-N/- phenyl thiourea. Indian Journal of Chemical Technology, 12. pp. 462-465. ISSN 0971-457X

55. Nair, Moorthy M and Shetty, Nagaraj and Shetty, Divakara S and Suvarna, Ashwin Harish and Mehafooz, MohiyuddinDevelopment and Comparison of Mechanical Properties of Uni-Directional E-Glass/Epoxy Composite with Coal Ash as Filler.Indian Journal of Science and Technology, 9 (37). ISSN 0974-6846

Conference or Workshop Item

1. Shetty, Nagaraj and Shetty, Divakara S and Krishna Kumar, P and Vijay, G S (2015) Mechanical characterization of uni-directional carbon fiber reinforced polymer composite. In: 2nd International Conference on Computational methods in engineering and health sciences (ICCMEH), 18/12/2015, University of Putra Malaysia, Malaysia.

2. Kini, Achutha U and Sharma , S S and Jagannath, K and Prabhu, P R and Bhat, Chandrashekhar and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M (2014) Comparative Study of EPHO and CBTC as Corrosion Inhibitors for 15 vol. % 6061 al Alloy/SiCp Composite in 1 M Hydrochloric Acid Medium. In: 3rd World Conference on Applied Sciences, Engineering and Technology, 27-29 September 2014, Kathmandu, Nepal.

3. Shetty, Nagaraj and Herbert, Mervin A and Shetty, Divakara S and Krishna Kumar, P (2014) Mechanical Characterization of Bi-Directional Carbon Fiber Reinforced Polymer Composite. In: Proceedings of International conference on Computational Methods in Engineering and Health Sciences, December 17-19 2014, Manipal.

4. Jayashree, P K and Shetty, Raviraj and Sharma , S S and Shetty, Divakara S (2014) Optimization of Process Parameters during Tungsten Inert Gas Welding of 6061 Aluminum Alloy Using Design of Experiments. In: Proceedings of International conference on Computational Methods in Engineering and Health Sciences, December 17-19 2014.

5. Umananda, K V and Shetty, Divakara S and Sharma , S S (2013) Study of Mechanical and Corrosion Properties of AISI 50110 (EN31) Steel With and Without Heat Treatment. In: International Conference ‘World Congress on Frontiers of Mechanical, Aeronautical and Automobile, 2nd - 3rd Feb, IIT Delhi.

6. Kini, Achutha U and Jagannath, K and Sharma , S S and Bhat, Chandrashekhar and Shetty, Prakash and Shetty, Divakara S(2013) Corrosion Inhibition of AA 6061 in Acidic Medium using Ethyl-2-Phenyl- hydrozono-3-oxobutyrate. In: 3rd International Conference on Mechanical, Automotive and Materials Engineering (ICMAME'2013), April 29-30, 2013 , Singapore.

7. Shetty, Divakara S and Kini, Achutha U and Shetty, Prakash (2013) Inhibition Behaviour of PHOH and PAOH on the Corrosion of 15 Vol. % 6061 Al Alloy/Sicp Composite. In: International Conference on Mechanical Engineering and Mechatronics, August 8-9 2013, Toronto, Ontario, Canada,

8. Shetty, Divakara S and Kini, Achutha U and Shetty, Prakash (2013) Inhibition Behaviour of PHOH and PAOH on the Corrosion of 15 Vol. % 6061 Al Alloy/Sicp Composite in 0.5 M Hydrochloric Acid Medium. In: Proceedings of the2nd International Conference on Mechanical Engineering and Mechatronics, August 8-9 2013, Toronto, Ontario, Canada.

9. Nayak, Rajesh and Shetty, Raviraj and Shetty, Divakara S (2012) Experimental investigation on cutting force and chip morphology under ambient and cryogenic condition during machining of elastomers. In: International conference on Mechanical and Industrial Engineering, 19th August 2012, Goa.

10. Revankar, Goutam D and Shetty, Raviraj and Shetty, Divakara S and Rao, Srikanth S (2012) Mathematical modelling of burnishing force on ball burnishing of titanium alloy using response surface methodology. In: Proceedings of International Conference in Mechanical and Industrial Engineering, 19th August 2012, Goa.

11. Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M (2012) Propanoyl(1E)-N-(2-acetylphenyl)-2- oxopropanehydrazonoate as a Corrosion Inhibitor for 6061 Al alloy–15 vol% SiC(p) Composite in 0.5 M Hydrochloric Acid. In: International Conference on Mechanical, Production and Materials Engineering (ICMPME'2012), June 16-17, Bangkok.

12. Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M (2012) Propanoyl(1E)-N-(2-acetylphenyl)-2-oxopropanehydrazonoate as a Corrosion Inhibitor for 6061 Al alloy–15 vol% SiC(p) Composite in 0.5 M Hydrochloric Acid Solution. In: International Conference on Mechanical, Production and Materials Engineering (ICMPME'2012), June 16-17 , Bangkok

13. Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M and Herle, Ramadev (2012) Effect of Echo as Corrosion Inhibitor for 15 vol.% 6061 Al Alloy/Sicp Composite in 1 M Hydrochloric Acid Medium. In: Adavnces in New Engineering Materials & Characterization AMC-2010, KVGCE, Sullia (D.K).

14. Herle, Ramadev and Shetty, Prakash and Shetty, Divakara S and Kini, Achutha U (2011) Inhibition of Corrosion of 304 SS in Acid Medium by N – Furfuryl –N'– Phenyl thiourea. In: National Conference on Advances in Mechanical Engineering, Jan 03- 05, 2011, M.I.T.,Manipal. (Submitted)

15. Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M and Herle, Ramadev (2011) Inhibition of corrosion of 15 Vol. % 6061 Al Alloy/SiCp composite using MMATT in 0.5 M Hydrochloric acid medium. In: National Conference on Advances in Mechanical Engineering 2011, 03 – 05 January, 2011, Jan 3-5, Manipal.

16. Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M (2011) Corrosion Inhibition of Al6061- SiCp Composite in 0.5 M Hydrochloric Acid. In: 2011 International Conference on Chemistry and Chemical Process, Bangkok, Thailand.

17. Herle, Ramadev and Shetty, Prakash and Shetty, Divakara S and Kini, Achutha U (2010) N – furfuryl –N'– phenyl Thiourea as Inhibitor for the Corrosion of Stainless steel type 304 in HCl solution. In: Proceedings of NAME 2010, 23-24 September 2010, Shimoga. (Submitted)

18. Shetty, Divakara S and Kini, Achutha U and Shetty, Prakash (2010) Corrosion Inhibition of 15 Vol. % 6061 Al Alloy/SiCp Composite in 1 M Hydrochloric Acid Medium. In: International Conference on Mechanical and Electrical Technology (ICMET 2010), Sept 10-12, Singapore.

19. Herle, Ramadev and Shetty, Prakash and Shetty, Divakara S and Kini, Achutha U (2010) Inhibition of 304 SS in Hydrochloric Acid Solution by N – Cyclohexyl – N′– Phenyl thiourea. In: International Journal of Contemporary Science, Engineering and Technology, 2010. (Submitted)

20. Herle, Ramadev and Shetty, Prakash and Shetty, Divakara S and Kini, Achutha U (2009) Corrosion Inhibition of 304 SS in Hydrochloric Acid solution by N – Cyclohexyl – N′– Phenyl Thiourea. In: International conference on Modern Trends in Materials Technology-, 19-20 January,2009, Sriperumbudur, Tamilnadu.

21. Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M and Herle, Ramadev (2009) Corrosion inhibition behavior study of Ethyl-2-Phenyl Hydrozono-3-Oxobutyrate on 15 vol. % 6061 Al alloy/SiCp composite in hydrochloric acid media. In: National Conference on Advances in Mechanical Engineering – AIMEngg-2009, Manipal.

22. Herle, Ramadev and Shetty, Prakash and Shetty, Divakara S and Kini, Achutha U (2009) Inhibition of 304 SS Corrosion in Hydrochloric Acid Solution. In: Proceedings of the National Conference on Advances in Mechanical Engineering – AIMEngg-2009, Manipal Institute of Technology, Manipal.

23. Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M (2009) Inhibition of Corrosion of 15 Vol.%6061 Al Alloy/Sicp Composite using Ethyl-2-Phenyl Hydrozono-3-Oxobutyrate in 0.1 N Hydrochloric Acid Medium. In: Recent Trends in Advanced Materials RTAM-2009, KVGCE, Sullia D.K.

24. Herle, Ramadev and Shetty, Prakash and Shetty, Divakara S and Kini, Achutha U (2008) N-Cyclohexyl - N - Phenyl Thiourea as Correoion Inhibitor for 304 SS In Hydrochloric Acid Solution. In: National Conference on Advances In Mechanical Engineering, 2008. (Submitted)

1. K. Praveen Shenoy, Ashwini T. P. (2020). Trajectory Tracking of a 3-DOF Helicopter by LQR Based PID Controller. International Journal of Advanced Science and Technology, 29(08), 1926- 1938. Retrieved from http://sersc.org/journals/index.php/IJAST/article/view/23264

2. Ashwini T. P., Balachandra Achar H. V., K. Praveen Shenoy. (2020). Random Forest Algorithm Based Strain Analysis on Composite Materials using Digital Image Processing. International Journal of Advanced Science and Technology, 29(08), 1966- 1972. Retrieved from http://sersc.org/journals/index.php/IJAST/article/view/23271

3. K Praveen Shenoy and Ashwini T P 2021 IOP Conf. Ser.: Mater. Sci. Eng. 1033 012034 https://doi.org/10.1088/1757-899X/1033/1/012034

4. Ashwini TP, Balachandra Achar, “A Survey on Image Analysis to determine Strain Distribution in Geosynthetics ”, ICECIC-2019,IEEE , Kanchipuram, Tamilnadu, 30-31 January 2019

5. Sanjay, Ashwini TP, “A study on Estimation of Phytoplankton Chlorophyll Level in Lakes by NDVI sensor Based System ” ICECIC-2019,IEEE , Kanchipuram, Tamilnadu, IJERT 2019, volvume7,Issue 10,2019

6. Ravikumar, Ashwini TP, “Low cost Low power Solar Based Multilevel Water Pumping for Irrigation” , IJR, volume 2, Issue 05, May 2015, Kanchipuram, Tamilnadu, IJERT 2019, volvume7,Issue 10.

1. Enhancement of mechanical properties of epoxy/halloysite nanotube (HNT) nanocomposites. Springer Nature Journal SN Applied Sciences, 1(4), 296.

2. Vibration Characterization of Reinforced Aluminium Composite Plates. Journal of Engineering Science and Technology Volume 02, Issue 01 (2019) Pg No : 71-88

3. Dynamic Vibrational Analysis on Areca Sheath fibre reinforced bio composites by Fast Fourier Analysis. Elsevier Materials Today: Proceedings 5.9 (2018): 19330-19339.

4. Experimental Setup to Determine Stress Wave Propagation in a Compound Bar Journal of Material & Metallurgical Engineering 8, no. 2 (2018): 1-6

5. A Review on Novelty of Design and Development of Pneumatic Bicycle. Journal of Aerospace Engineering & Technology 8, no. 1 (2018): 1-4

6. Fabrication of Pneumatic Four Wheeler. International Journal of New Technology and Research 4, no. 2

7. Study on Tensile Analysis of Untreated Chopped Natural Areca Sheath Fiber Reinforced Polymer Matrix Bio-Composites. International Journal of Engineering Research and Advancement Technology, 2, 338-93

Technical Papers Presented in Conferences:

1. Structural Stati Analysis of Aircraft Fuselage with Aluminium and Composite Material International Conference on Applied Science Engineering and Technology (ICASET- 18) Sengunthar College of Engineering, Tamilnadu.

2. Study on Critical length of Fiber on Natural Areca Shealth Reinforced Polymer matrix Composites by Tensile and Flexural Testings. International Conference on Emerging Trends in Engineering, Management, Science and Technologies (ICEEMST-2017), Andhra Pradesh.

3. Flexural Behaviour of Short Areca Sheath Fiber Reinforced Polymer Matrix Bio-Composites. National Conference, Christ University Faculty of Engineering, Bengaluru

4. The Study and Development of Areca Fiber Reinforced Polymer Composites. National Conference, Christ University Faculty of Engineering, Bengaluru

5. Free Vibration Analysis of Untreated Areca Sheath Fiber Reinforced PMC. International Conference IIT Guwahathi

• Comparative Analysis of Vehicle Detection and Counting Algorithms for Traffic Systems, International Journal of Engineering Research and Application, ISSN:2248-9622,Vol.10,Issue 03(Series -II),March 2020, pp 50-54

• Vighneshwara C, Sowmya Kini M and K Praveen Shenoy, Smart Sensors Measurements and Instrumentation, 1876-1100, http://doi.org/10.1007/978-981-16-0336-5

1. International level Paper on “A Novel Technique for Production of Paint from the Diesel Exhaust Soot”, at International Conference on Emerging Trends in Mechanical Engineering (ETime2019) on August 9^th and 10^th 2019, to be published in American Institute of Physics Conference Proceedings, indexed by Scopus (Elsevier) and Citation Index (Web of Science).

2. International level Paper on “Performance Analysis of Converter Circuit Transfer Function Model Using PID Control Algorithms”, at International conference on VLSI, Signal Processing, Power systems, Illumination and control, Communication and Embedded system at NMAMIT, NITTE, on 22^nd and 23^rd May 2019, published in Lecture Notes in Electrical Engineering by Springer which is indexed in Scopus.

3. National level paper on “Modelling and Analysis of Multimachine Power System using MATLAB/SIMULINK” at National Conference on Recent Trends in Electrical Science and Information Technology on April 2019.

4. National level paper on “Development & Testing of Real Time Water Quality monitoring system for lakes” at National Conference on Recent Trends in Electrical Science and Information Technology on April 2019.

5. International Level Paper on “Harmonic Analysis to improve Power Quality” in International Journal of Innovative Research in Technology in March 2019.

6. International Conference Icon MMEE 2018 on “Fuel Cells-A Sign post to Future” in March 2018.

7. National level paper on, “Introduction of cellular automata in designing stream cipher”, at ICEECE, an international level technical symposium at Pune.

1. Kirankumar M V, Dr.Lokesha M, Sujesh kumar,Ajith Kumar Shetty. Review on condition monitoring of bearings using Vibration Analysis. publication in International Conference on Advances in Manufacturing, Materials & Energy Engineering (Icon MMEE-2018) at MITE, Moodbidri.

2. Sujeshkumar, Dr.Lokesha M, Kirankumar M V. Vibration based Fault Diagnosis Techniques for Rotating Mechanical Components: Review Paper. Publication in International Conference on Advances in Manufacturing, Materials & Energy Engineering (Icon MMEE-2018) at MITE, Moodbidri.

3. Vinod , Ajith Kumar , B Suresha , M V Kiran Kumar and S Ramesh. Study on Two Body Abrasive Wear behaviour of Carboxyl Graphene Reinforced Epoxy Nano-composites. Publication in International Conference on Advances in Manufacturing, Materials & Energy Engineering (Icon MMEE-2018) at MITE, Moodbidri.

1. Akshaya D. Shetty, Disha, Shubha B., Suryanarayana K., ““Detection and Tracking of a Human Using the Infrared Thermopile Array Sensor-Grid-EYE”, Proceedings of 2017 International Conference on Intelligent Computing Instrumentation and Control Technologies (ICICICT), pp. 1490-1495, 2017.

2. Akshaya D. Shetty, Disha, Shubha B., Suryanarayana K, “The Comparative Study on Thermocouple and Thermopile used for Temperature Measurement”, Institute for Exploring Advances in Engineering, pp. 37-39, 2017.

3. Akshaya D. Shetty, Disha, Shubha B., Suryanarayana K, “Temperature Based Moving Object Tracking Using Infrared Thermopile Array Sensor”, Special Issue of NMAMIT Annual Research Journal, 2017, pp. 123-126.

4. Akshaya D. Shetty, “Detection of intruders in warehouses using Infrared based Thermopile Sensor Array”, IOP Conf. Series: Materials Science and Engineering 376 (2018) 012087, pp. 1-5, 2018.

• Applied for Indian Patent for "Triphibious Vehicle" on August 4th 2017 with Indian Patent Application Number '201741027807' through Manipal Academy of Higher Education and Centre for Avionics, MAHE,Manipal. Status: Published in 2019

• Applied for Indian Patent for "Automated Food Processing Machine Using Programmable Logic Controller" on November 29th, 2018 with Indian Patent Application Number ‘201841045058’ by, Manipal Academy of Higher Education, Manipal. Status: Published in 2020

• Prajwal Shenoy, T., Praveen Shenoy, K., Khan, L., Aziz, S., Afran, S., & Kumar, K. (2018). Design and development of a novel triphibian quadcopter. International Journal of Engineering and Technology (UAE), 7(2),14. https://doi.org/10.14419/ijet.v7i2.21.11822

• K. Praveen Shenoy, Ashwini T. P. (2020). Trajectory Tracking of a 3-DOF Helicopter by LQR Based PID Controller. International Journal of Advanced Science and Technology, 29(08), 1926- 1938. Retrieved from http://sersc.org/journals/index.php/IJAST/article/view/23264

• Ashwini T. P., Balachandra Achar H. V., K. Praveen Shenoy. (2020). Random Forest Algorithm Based Strain Analysis on Composite Materials using Digital Image Processing. International Journal of Advanced Science and Technology, 29(08), 1966- 1972. Retrieved from http://sersc.org/journals/index.php/IJAST/article/view/23271

• K Praveen Shenoy and Ashwini T P 2021 IOP Conf. Ser.: Mater. Sci. Eng. 1033 012034 https://doi.org/10.1088/1757-899X/1033/1/012034

• Vidya S. Rao, Praveen Shenoy K., Santhosh K. V. Design of PLC Based Automated Food Processing Machine, International Journal of Mechanics, 22-29, http://doi.org/10.46300/9104.2021.15.3

• Vighneshwara C, Sowmya Kini M and K Praveen Shenoy, Smart Sensors Measurements and Instrumentation, 1876-1100, http://doi.org/10.1007/978-981-16-0336-5