Collaborative Shaped PCB

Design Requirements:

•  You must start with a minimum of 6 roughly sketched ideas (3 per person)

• Use at least 4 LEDs, but no more than 12.

•  LEDs will be 3mm type. You can choose LED colors : Red, Yellow, White, Blue, or Green

•  All LEDs require a 100ohm resistor

•  Board is coin cell operated

•  Include small on/off switch

• Step 1 is to Breadboard your circuit (as or) before you design it 

• The work needs to be collaborative - step up and invite in

• Size less than 8000 square mm (example 100mm x 80mm  /  3.9” x 3.1”). You can choose the color: White, black, green, red, blue, yellow, purple.

• Cannot be just a rectangle

• Shapes must be original and not identifiable as someone else's design

Optional:

•  Can be wearable, bike light, small flashlight, or creative.

•  Include silkscreen designs or text (if you have time)