These rules govern all activities conducted in the school shop space outside of regular classroom hours and are mandatory for all club members.

1. Access and Supervision

• Authorized Access Only: Students may only be in the shop space during scheduled Go-Kart Club hours.

• No Unsupervised Work: No student is permitted to operate any power tool, welder, or heavy equipment without the direct, visible supervision of the club supervisor.

2. General Safety and PPE

• Mandatory PPE: Safety glasses must be worn by everyone at all times.

• Attire: No loose clothing, open-toe shoes, dangling jewelry, or unrestrained long hair is allowed while working with machinery. Sleeves must be rolled up above the elbow.

• Machine Guards: All safety guards and shields on stationary machinery (grinders, saws, drills) must be in place and fully functional before use. Never override a safety device.

• Fire Safety: Know the location of all fire extinguishers. No flammable materials (solvents, rags, fuel) are to be stored near welding stations.

3. Tool Use and Shop Conduct

• Tool Maintenance: All specialized tools must be returned to their proper storage locations. Tools must be returned clean, functional at the end of a session.

• Cleanup Protocol: All work surfaces must be swept or cleaned immediately after use. All club members must participate in a cleanup before dismissal to ensure the shop is left organized and safe.

• No Horseplay: Roughhousing, running, throwing objects, or distracting behaviour is strictly prohibited. Violations will result in immediate dismissal from the club meeting.

• Equipment Reporting: Any damaged or dull tool, or malfunctioning piece of equipment, must be reported to the club advisor so it can be safely removed from service.

4. Welding and Fabrication

• Welding Zones: Welding is permitted only in designated, shielded booths or areas. Clear all flammable materials from the work zone before beginning.

• Ventilation: Ensure the ventilation fan is operating correctly before any welding or significant grinding begins.

• Hot Work: All recently welded or cut metal must be allowed to cool in a designated area. Never touch metal directly after hot work.