Step By Step Instructions: Trinket Box

1 Front and Back

2

Sides

1 pc. 1" X 6" X 20"

machine 2 pcs. 3/4" x 4" x 9" 2 pcs. 1" X 6" X 14"

machine but leave as thick as you can; arrange and glue. machine to 3/4" x 11-1/2" x 13" sand and router drill and countersink according to template

3

Bottom

4

Top

2 pcs 1" x 6" x 13"

machine but leave as thick as you can; arrange and glue. machine to 3/4" x 10-1/2" x 12" sand cnc router router edge

Requires 2 pcs. 1/2"x 1-3/4" x 8”- Use Scrap Wood if available.

| Tray Supports

Assemble sides, front and back and then attach bottom, screw bottom to frame and plug holes Router out hinge gains

5

Assemble

6

Tray

Sides and Ends

1pc. 1” x 6” x 20"

machine to 1/2" x 5-1/2" x 20" rip 2 pcs. 2” wide — rabbet one edge of both pcs. 1/2" x 1/4" from these strips cut 2 pcs 9-1/4” (front and back) and 2 pcs 7-1/4" (ends) rabbet ends of front and back 1/2" x 1/4"

2 pcs. 12"- thickness to 7/8” x 5-1/2” x 12”

- arrange and glue -machine to 1/2” x 7-1/4" x 8-3/4"

Bottom

Using scrap wood l. machine to 1/2"x 1 1/2", chamfer top edges

cut 1 pc. 3-3/4" and 1 pc. 6-5/8" (make sure sizes fit your project) hot glue in place

Dividers