論文期刊

期刊論文

1.       Heng-Li Huang, Yin-Yu Chang (Equal 1st author), Ming-Tzu Tsai, Shu-Yan Lee, Yi-Hsung Chuang, Ming-Xun Yang, Tzong-Ming Shieh, Peng Su, “Laser texturing and oxidation of TiZrTa thin films to improve the biocompatible performance of titanium alloys”, Surface & Coatings Technology, 482 (2024) 130734, 12 pages. Publication date: 2024/4/30. (SCI). MOE STEM111-2. Impact factor= 5.4; Rank= 4/21 (Q1) in Materials Science, Coatings & Films - SCIE.

2.         Yin-Yu Chang*, He-Qian Feng, Kai-Chun Huang, “On the high temperature oxidation behavior of AlCrBN/TiAlNbSiN multilayer coatings with addition of boron and silicon”, Surface & Coatings Technology 475 (2023) 130180, 17 pages. Publication date: 2023/12/25. (SCI). NSTC 111-2221-E-150-030-MY3. Impact factor= 5.4; Rank= 4/21 (Q1) in Materials Science, Coatings & Films - SCIE.

3.      Yin-Yu Chang*, He-Qian Feng, Chein-Chieh Chen, “Effect of CrMoN Addition on the Thermal Stability and Cyclic Impact Resistance of TiVN Coatings”, Surface & Coatings Technology 473 (2023) 129963. 14 pages. Publication date: 2023/11/25. (SCI). NSTC 111-2221-E-150-030-MY3. Impact factor= 5.4; Rank= 4/21 (Q1) in Materials Science, Coatings & Films - SCIE.

4.        Heng-Li Huang, Ming-Tzu Tsai, Yu-Ju Yang, Jui-Ting Hsu, Yin-Yu Chang*, “Mechanical, antibacterial and cytotoxic characteristics of nanolayered TiNb-Zr-Ta and nitrogen-doped TiNb-Zr-Ta coatings”, Materials Chemistry and Physics 309 (2023) 128437. 13 pages. Publication date: 2023/11/1. (SCI). MOST 111-2634-F-007 -008. Impact factor= 4.6; Rank= 128/342 (Q2) in Materials Chemistry and Physics-SCIE.

5.     Yin-Yu Chang*, Kai-Chun Huang, “Improvement of Tribological Performance of TiAlNbN Hard Coatings by Adding AlCrN”, Materials 15(21)(2022), 7750, 15 pages, Publication date: 2022/11/03. (SCI). MOST 111-2221-E-150 -030-MY3, MOST 111-2634-F-007-008. Impact factor= 3.748; Rank= 18/79 (Q1) in Metallurgy & Metallurgical Engineering.

6.         Yin-Yu Chang*, Jyun-Wei Huang, “Nanostructured AlTiSiN/CrVN/ZrN coatings synthesized by cathodic arc deposition- mechanical properties and cutting performance”, Surface & Coatings Technology, 442(2022) 128424, 11 pages. Publication date: 2022/7/25. (SCI). MOST 108-2221-E-150 -020-MY3, MOST 110-2634-F-007-024. Impact factor= 4.158; Rank= 40/160 (Q1) in Physics, Applied - SCIE.

7.         Yin-Yu Chang*, Bao-Yu Chang, Chi-Sheng Chen, “Effect of CrN addition on the mechanical and tribological performances of multilayered AlTiN/CrN/ZrN hard coatings”, Surface & Coatings Technology 433(2022) 128107, 13 pages. Publication date: 2022/1/14. (SCI). MOST 108-2221-E-150 -020-MY3, MOST 110-2634-F-007-024. Impact factor= 4.158; Rank= 40/160 (Q1) in Physics, Applied - SCIE.

8.         Yin-Yu Chang*, Cheng-Hsi Chung, Zong-Hong Tsai, Jun-Ming Tsai, “Tribological and Mechanical properties of AlCrBN hard coating deposited using cathodic arc evaporation”, Surface & Coatings Technology 432(2022) 128097, 14 pages. Publication date: 2022/1/10. (SCI). MOST 108-2221-E-150 -020-MY3, MOST 110-2634-F-007-024. Impact factor= 4.158; Rank= 40/160 (Q1) in Physics, Applied - SCIE.

9.         Bo-Wei Lai, Yin-Yu Chang, Tzong-Ming Shieh, Heng-Li Huang, “Biocompatibility and Microstructure-Based Stress Analyses of TiNbZrTa Composite Films”, Materials 15(1)(2022), 29, 17 pages, Publication date: 2021/12/21. (SCI). Impact factor= 3.263; Rank= 17/80 (Q1) in Metallurgy & Metallurgical Engineering.

10.      Yin-Yu Chang*, Liang-Chan Chao, “Effect of Substrate Bias Voltage on the Mechanical Properties of AlTiN/CrTiSiN Multilayer Hard Coatings”, Vacuum 190(2021) 110241, 11 pages. Publication date: 2021/5/1. (SCI). MOST 108-2221-E-150-020-MY3 and MOST 109-2634-F-007-024. Impact factor= 2.906; Rank= 55/155 (Q2) in Physics, Applied.

11.      Yin-Yu Chang*, Cheng-Hsi Chung, “Tribological and Mechanical Properties of Multicomponent CrVTiNbZr(N) Coatings”, Coatings 11(2021) 41, 16 pages. Publication date: 2021/1/2. (SCI). MOST 108-2221-E-150-020-MY3 and MOST 109-2634-F-007-024. Impact factor= 2.436; Rank= 10/21(Q2) in Materials science, coatings & films.

12.      Yin-Yu Chang*, Chih-Cheng Chuang, “Deposition of Multicomponent AlTiCrMoN Protective Coatings for Metal Cutting Applications”, Coatings 10(2020) 605, 18 pages. Publication date: 2020/6/28. (SCI). MOST 108-2221-E-150-020-MY3 and MOST 109-2634-F-007-024. Impact factor= 2.436; Rank= 10/21(Q2) in Materials science, coatings & films.

13.      Heng-Li Huang, Ming-Tzu Tsai, Yin-Yu Chang*, Yi-Jyun Lin, Jui-Ting Hsu, “Fabrication of a Novel Ta(Zn)O Thin Film on Titanium by Magnetron Sputtering and Plasma Electrolytic Oxidation for Cell Biocompatibilities and Antibacterial Applications”, Metals 10(2020) 649, 17 pages. Publication date: 2020/5/18. (SCI). MOST 107-2218-E-131 -001 and MOST 108-2221-E-150-020-MY3. Impact factor= 2.117; Rank= 18/79 (Q1) in Metallurgy & Metallurgical Engineering.

14.      Yin-Yu Chang*,Yu-Ju Yang, Shi -Yao Weng, “Effect of Interlayer Design on the Mechanical Properties of AlTiCrN and Multilayered AlTiCrN/TiSiN Hard Coatings”, Surface & Coatings Technology 389(2020) 125637, 11 pages. Publication date: 2020/5/20. (SCI). MOST 108-2221-E-150 -020-MY3, MOST 108-3017-F-007-002. Impact factor= 3.784; Rank= 3/21 (Q1) in Materials science, coatings & films.

15.      Heng-Li Huang, Ming-Tzu Tsai, Yi-Jou Lin, Yin-Yu Chang*, “Antibacterial and biological characteristics of tantalum oxide coated titanium pretreated by plasma electrolytic oxidation“, Thin Solid Films 688(2019) 137268, 9 pages. Publication date: 2019/10/31. (SCI). MOST 108-3017-F-007-002, MOST 107-2221-E-039-007 and MOST 107-2221-E-150 -003. Impact factor= 2.030; Rank= 81/155 (Q3) in Physics, applied Science.

16.      Yin-Yu Chang*, Meng-Chun Cai,“Mechanical property and tribological performance of AlTiSiN and AlTiBN hard coatings using ternary alloy targets“, Surface & Coatings Technology 374(2019) 1120-1127. Publication date: 2019/09/25. (SCI). MOST 106-2221-E-150-011. Impact factor= 3.784; Rank= 3/21 (Q1) in Materials science, coatings & films.

17.      Yin-Yu Chang*, Siddhant Amrutwar, “Effect of Plasma Nitriding Pretreatment on the Mechanical Properties of AlCrSiN Coated Tool Steels”, Materials 12(2019) 795, 14 pages. Publication date: 2019/03/07. MOST 107-2218-E-131 -001 and MOST 107-2221-E-150 -003. Impact factor= 3.057; Rank= 132/314 (Q2) in Materials science, multidisciplinary.

18.      Yin-Yu Chang*, Jia-Hao Zhang, Heng-Li Huang*, “Effects of laser texture oxidation and high-temperature annealing of Ti-V alloy thin films on mechanical and antibacterial properties and cytotoxicity”, Materials 11(2018) 2495, 15 pages. Publication date: 2018/12/08. MOST 107-2221-E-150-003 and MOST 107-2221-E-039-007 and MOST 107-2218-E-131-001. Impact factor= 3.057; Rank= 132/314 (Q2) in Materials science, multidisciplinary.

19.      Yin-Yu Chang*, Hung Chang, Liang-Jhan Jhao, Chih-Cheng Chuang, “Tribological and mechanical properties of multilayered TiVN/TiSiN coatings synthesized by cathodic arc evaporation”, Surface & Coatings Technology  350(2018) 1071-1079. Publication date: 2018/09/25. (SCI). MOST 106-2221-E-150-011. Impact factor= 3.784; Rank= 3/21 (Q1) in Materials science, coatings & films.

20.      T.S. Yang, S.H. Yao*, Y.Y. Chang, J.H. Deng, “Contact Behavior of Composite CrTiSiN Coated Dies in Compressing of Mg Alloy Sheets under High Pressure“, Materials 11(2018) 88, 11 pages. Publication date: 2018/01/8. (SCI). Impact factor= 3.057; Rank= 132/314 (Q2) in Materials science, multidisciplinary.

21.      Yin-Yu Chang*, Shi-Yao Weng, Chun-Hsiao Chen, Fu-Xing Fu,“High Temperature Oxidation and Cutting Performance of AlCrN, TiVN and Multilayered AlCrN/TiVN Hard Coatings“, Surface & Coatings Technology 332(2017) 494-503. Publication date: 2017/12/25, (SCI). MOST 103-2622-E-150 -011 -CC3 and MOST 105-2221-E-150 -003. Impact factor= 3.784; Rank= 3/21 (Q1) in Materials science, coatings & films.

22.      Sheng-Min Yang, Yung-Ting Huang, Yin-Yu Chang, Yeong-Tsuen Pan, Dong-Yih Lin, “Oxidation resistance of Cr2N and (Cr,W)2N coatings deposited on ferritic stainless steel”, Surface & Coatings Technology 325 (2017) 7–13. Publication date: 2017/06/15. (SCI). MOST 104-2218-E-390-001. Impact factor= 3.784; Rank= 3/21 (Q1) in Materials science, coatings & films.

23.      Ming-Tzu Tsai, Yin-Yu Chang*, Heng-Li Huang, Yu-Hsuan Wu, Tzong-Ming Shieh, “Micro-arc oxidation treatment enhanced the biological performance of human osteosarcoma cell line and human skin fibroblasts cultured on titanium–zirconium films”, Surface & Coatings Technology 303A (2016) 268–276. Publication date: 2016/10/15. (SCI). MOST 104-2314-B-039-043, MOST 104-2221-E-150-003, and MOST 103-2320-B-241-003. Impact factor= 3.784; Rank= 3/21 (Q1) in Materials science, coatings & films.

24.      Yin-Yu Chang*, Wen-Tung Chiu, Jui-Pin Hung,“Mechanical properties and high temperature oxidation of CrAlSiN/TiVN hard coatings synthesized by cathodic arc evaporation“, Surface & Coatings Technology 303A (2016) 18-24. Publication date: 2016/10/15. (SCI). MOST 104-2314-B-039-043, MOST 104-2221-E-150-003, and MOST 103-2320-B-241-003. Impact factor= 3.784; Rank= 3/21 (Q1) in Materials science, coatings & films.

25.      Heng-Li Huang, Yin-Yu Chang*, Jia-Xu Liu, Ming-Tzu Tsai, Chih-Ho Lai, “Antibacterial Activity and Cell Compatibility of TiZrN, TiZrCN, and TiZr-amorphous Carbon Coatings”, Thin Solid Films, 596(2015)111-117. Publication date: 2015/12/21. (SCI). NSC 102-2221-E-150-006 and MOST 104-2221-E-150-003. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.

26.      K. Bobzin, T. Brögelmann, R.H. Brugnara, M. Arghavani, T.S. Yang, Y.Y. Chang, S.Y. Chang, “Investigation on plastic behavior of HPPMS CrN, AlN and CrN/AlN-multilayer coatings using finite element simulation and nanoindentation”, Surface & Coatings Technology 284 (2015) 310–317. Publication date: 2015/08/20. (SCI). Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.

27.      Yin-Yu Chang*, Heng-Li Huang, Hung-Jui Chen, Chih-Ho Lai, Chi-Yuan Wen, “Antibacterial Properties and Cytocompatibility of Tantalum Oxide Coatings”, Surface & Coatings Technology, 259B(2014)193–198. Publication date: 2014/11/25. (SCI). NSC 102-2221-E-150-006 and NSC 101-2314-B-039-022-MY3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.

28.      Yin-Yu Chang, Heng-Li Huang, Ya-Chi Chen, Jui-Ting Hsu, Tzong-Ming Shieh, Ming-Tzu Tsai*, “Biological Characteristics of the MG-63 Human Osteosarcoma Cells on Composite Tantalum Carbide/Amorphous Carbon Films”, PLOS ONE,  9(4):e95590. Publication date: 2014/4/23. (SCI). NSC 101-2221-E-150-032. Impact factor= 2.740; Rank= 27/71 in Multidisciplinary Sciences.

29.      Ming-Tzu Tsai, Yin-Yu Chang*, Heng-Li Huang, Ya-Chi Chen, Shun-Ping Wang, Chih-Ho Lai, “Biological Characteristics of Human Fetal Skin Fibroblasts and MG-63 Human Osteosarcoma Cells on Tantalum-doped Carbon Films”, Surface & Coatings Technology, 245(2014)16-21. Publication date: 2014/4/28. (SCI). NSC 102-2221-E-150-006, NSC 101-2314-B-039-022-MY3, TCVGH-HK1008008, and TCVGH-HK1028002. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.

30.      Yin-Yu Chang*, Hsing-Ming Lai, “Wear behavior and cutting performance of CrAlSiN and TiAlSiN hard coatings on cemented carbide cutting tools for Ti alloys”, Surface & Coatings Technology, 259(2014)152–158. Publication date: 2014/2/15. (SCI). NSC 102-2622-E-150-001 and NSC 102-2221-E-150-005-MY2. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.

31.      Heng-Li Huang, Yin-Yu Chang*, Hung-Jui Chen, Yu-Kai Chou, Chih-Ho Lai, Michael YC Chen, “Antibacterial Properties and Cytocompatibility of Tantalum Oxide Coatings with Different Silver Contents”, Journal of Vacuum Science & Technology A (JVST A), 32(2014) 02B117-1~6. Publication date: 2014/2/6. (SCI). NSC 101-2221-E-150-032 and NSC 101-2622-E-150-001. Impact factor= 2.140; Rank= 5/18 in Materials science, coatings & films.

32.      Yin-Yu Chang*, Hsing-Ming Lai, Ho-Yi Kao, “High temperature wettability of ion implanted multicomponent CrAlSiN films by molten glass”, Surface & Coatings Technology, 237(2013)164-169. Publication date: 2013/12/25. (SCI). NSC 101-2221-E-150 -032 and NSC 101-2622-E-150 -015-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.

33.      Heng-Li Huang, Yin-Yu Chang*, Ya-Chi Chen, Chih-Ho Lai, Michael YC Chen, “Cytocompatibility and Antibacterial Properties of Zirconia Coatings with Different Silver Contents on Titanium”, Thin Solid Films, 549 (2013) 108-116. Publication date: 2013/12/31. (SCI). NSC 101-2221-E-150-032 and NSC 101-2314-B-039-022-MY3. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.

34.      Yin-Yu Chang*, Heng-Li Huang, Ya-Chi Chen, Jui-Ching Weng, Chih-Ho Lai, “Characterization and antibacterial performance of ZrNO-Ag coatings”, Surface & Coatings Technology, 231(2013)224-228. Publication date: 2013/09/25. (SCI). NSC 99-2622-E-451-004-CC3 and NSC 100-2221-E-150 -095. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.

35.      Yin-Yu Chang*, Chih-Ming Cheng, Yau-Yi Liou, Wolfgang Tillmann, Fabian Hoffmann, Tobias Sprute, “High temperature wettability of multicomponent CrAlSiN and TiAlSiN coatings by molten glass”, Surface & Coatings Technology, 231(2013)24-28. Publication date: 2013/09/25. (SCI). NSC 99-2221-E-451 -005 / NSC 100-2221-E-150 -095. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.

36.      Yin-Yu Chang*, Chen-Jui Wu, “Mechanical properties and impact resistance of multilayered TiAlN/ZrN coatings”, Surface & Coatings Technology, 231(2013)62-66. Publication date: 2013/09/25. (SCI). NSC 100-2221-E-150 -095 / NSC 100-2622-E-150 -016 -CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films. 

37.      Wolfgang Tillmann, Tobias Sprute, Fabian Hoffmann, Yin-Yu Chang, Ching-Yu Tsai, “Influence of Bias Voltage on Residual Stresses and Tribological Properties of TiAlVN-Coatings at Elevated Temperatures”, Surface & Coatings Technology, 231(2013)122-125. Publication date: 2013/09/25. (SCI). NSC 100-2911-I-451-503 (DAAD/NSC PPP Program). Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.

38.      Yin-Yu Chang, Heng-Li Huang*, Jui-Ting Hsu, Chih-Ho Lai, Tzong-Ming Shieh, Aaron Yu-Jen Wu, Chao-Ling Chen, “Analyses of antibacterial activity and cell compatibilty of titanium coated with a Zr-C-N film”, PLOS ONE, 8 (2013) e56771(6 pages). Publication date: 2013/02/19. (SCI). NSC 101-2314-B-039-022-MY3. Impact factor= 2.740; Rank= 27/71 in Multidisciplinary Sciences.

39.      Heng-Li Huang, Yin-Yu Chang*, Jui-Ching Weng, Ya-Chi Chen, Chih-Ho Lai, Tzong-Ming Shieh, “Anti-bacterial Performance of Zirconia Coatings on Titanium Implants”, Thin Solid Films, 528 (2013) 151-156. Publication date: 2013/01/15. (SCI). NSC 99-2622-E-451-004-CC3 / NSC 100-2221-E-150-095, Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.

40.      Ming-Tzu Tsai, Yin-Yu Chang*, Heng-Li Huang, Jui-Ting Hsu, Ya-Chi Chen, Aaron Yu-Jen Wu, “Characterization and antibacterial performance of bioactive Ti-Zn-O coatings deposited on titanium implants”, Thin Solid Films, 528 (2013) 143-150. Publication date: 2013/01/15. (SCI). NSC 99-2622-E-451-004-CC3 / NSC 100-2221-E-150-095, Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.

41.      Yin-Yu Chang, Tung-Sheng Yang, Sheng-Yi Chang, “Microstructural and Mechanical Properties of Single-Layered and Multilayered on H13 Tool Steels by a Cathodic Arc Deposition Process”, Advanced Science Letters, 8 (2012) 845-850. Publication date: 2012/04/15. (SCI). Impact factor= 1.253; Rank= 15/59 in Multidisciplinary sciences.

42.      Shui-Yang Lien, Yu-Cheng Chang, Yun-Shao Cho, Yin-Yu Chang, and Shuo-Jen Lee, “Deposition and Characterization of High-Efficiency Silicon Thin-Film Solar Cells by HF-PECVD and OES Technology”, IEEE Transactions on Electron Devices, 59 (2012) 1245-1254. Publication date: 2012/05. Impact factor= 2.358; Rank= 44/248 in Engineering, electrical & electronic.  

43.      Yin-Yu Chang, Chih-Ho Lai, Jui-Ting Hsu, Chih-Hsin Tang, Wan-Chuen Liao, Heng-Li Huang, “Antibacterial properties and human gingival fibroblast cell compatibility of TiO2/Ag compound coatings and ZnO films on titanium-based material”, Clinical Oral Investigations, 16 (2012) 95-100. (SCI).  Publication date: 2012/02. Impact factor= 3.723; Rank= 15/91 in Dentistry, oral surgery & medicine.

44.      Chih-Ho Lai, Yin-Yu Chang*, Heng-Li Huang, Ho-Yi Kao, “Characterization and antibacterial performance of ZrCN/amorphous carbon coatings deposited on titanium implants”, Thin Solid Films, 520 (2011) 1525-1531. Publication date: 2011/12. (SCI). NSC 99-2622-E-451-004-CC3 / NSC 99-2221-E-451-005. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.

45.      Chein-Hung Yu, Heng-Li Huang, Li-Chun Wu, Jui-Ting Hsu, Yin-Yu Chang, Her-Hsiung Huang, Ming-Tzu Tsai, “Friction of stainless steel, nickel-titanium alloy, and beta-titanium alloy archwires in two commonly used orthodontic brackets”, Journal of Mechanics in Medicine and Biology, 11(4)(2011)917-928. Publication date: 2011/09. (SCI). Impact factor= 0.493; Rank= 59/70 in Engineering, biomedical.

46.      Jian-Hong Yu, Li-Chun Wu, Jui-Ting Hsu, Yin-Yu Chang, Her-Hsiung Huang, Heng-Li Huang, “Surface Roughnesses and Tomographies of Four Commonly Used Orthodontic Archwires”, Journal of Medical and Biological Engineering, 31(5)(2011)367-370. Publication date: 2011/11. (SCI). Impact factor= 1.173; Rank= 73/87 in Engineering, biomedical.

------------------------------------------------------------------------------------------------------------------------

47.      Yin-Yu Chang*, Chi-Pang Chang, Ho-Yi Kao, “High temperature oxidation resistance of multilayered AlxTi1-xN/CrN coatings”, Thin Solid Films, 519 (2011) 6716-6720. (SCI). NSC 98-2221-E-451-006. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.  

48.      Yin-Yu Chang*, Yaw-Nan Shieh, Ho-Yi Kao, “Optical properties of TiO2 thin films after Ag ion implantation”, Thin Solid Films, 519 (2011) 6935-6939. (SCI). NSC 99-2221-E-451-005. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.

49.      Heng-Li Huang, Yin-Yu Chang, Dan-Jae Lin, Yu-Fen Li, Kuan-Ting Chen, Jui-Ting Hsu, “Bone strain and initial stability evaluation of an immediately loaded dental implant on various bone quality and quantity: an in vitro study”, Clinical Oral Implants Research, 22 (2011) 691-698. (SCI). Impact factor= 3.723; Rank= 8/91 in Dentistry, oral surgery & medicine.

50.      Shui-Yang Lien, Yin-Yu Chang, Jui-Hao Wang, Ko-Wei Weng, Ching-Hsun Chao, Chia-Fu Chen, “Characterization of HF-PECVD a-Si:H thin film solar cells using by OES studies”, Journal of Non-Crystalline Solids, 357 (2011)161-164. (SCI). NSC 98-2221-E-451-003 / 98-2622-E-451-001-CC3. Impact factor= 2.292; Rank= 4/28 in Materials science, ceramics.

51.      P.Vijai Bharathy, Yin-Yu Chang, D.Nataraj, Q.Yang, Sheng-Min Yang, D.Mangalaraj, Lei Yang, Thomas J. Webster, “Effect of nickel incorporation on structural, nanomechanical and biocompatible properties of amorphous hydrogenated carbon thin films prepared by low energy biased target ion beam deposition”, Thin Solid Films, 519 (2010) 1623-1628. (SCI). Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.

52.      Heng-Li Huang, Yin-Yu Chang*, Meng-Cheng Lai, Cai-Rong Lin, Chih-Ho Lai, Tzong-Ming Shieh, “Antibacterial TaN-Ag Coatings on Titanium Dental Implants”, Surface & Coatings Technology, 205 (2010) 1636-1641. (SCI). NSC 99-2622-E-451-004-CC3 / NSC 98-2221-E-451-006. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.

53.      Yaw-Nan Shieh, Yin-Yu Chang*, “Influence of cobalt ion implantation on optical properties of titanium dioxide thin films”, Thin Solid Films, 518 (2010) 7464-7467. (SCI). Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.

54.      Yin-Yu Chang*, Sheng-Min Yang, “High Temperature oxidation behavior of multicomponent TiAlSiN coatings”, Thin Solid Films, 518 (2010) 534-537. (SCI) NSC 98-2221-E-451-006. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.

55.      Yin-Yu Chang*, Chi-Pang Chang, “High Temperature Stability of Multicomponent TiAlSiN and CrAlSiN Coatings”, Journal of Nanoscience and Nanotechnology, 10 (2010) 4762-4766. (SCI) NSC 98-2221-E-451-006. Impact factor= 1.134; Rank= 137/177 in Chemistry, Multidisciplinary.

56.      Yin-Yu Chang*, Chi-Pang Chang, “Microstructural and mechanical properties of graded and multilayered AlxTi1-xN/CrN coatings synthesized by a cathodic-arc deposition process”, Surface & Coatings Technology, 204 (2009) 1030-1034. (SCI) NSC 97-2221-E-451-005. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.

57.      Yin-Yu Chang*, Chia-Yuan Hsiao, “High temperature oxidation resistance of multicomponent Cr-Ti-Al-Si-N coatings”, Surface & Coatings Technology, 204 (2009) 992-996. (SCI) NSC 97-2221-E-451-005. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.

58.      Yin-Yu Chang*, Shun-Jan Yang, Weite Wu, Yu-Chu Kuo, Jyh-Wei Lee, Chaur-Jeng Wang, “Mechanical properties of gradient and multilayered TiAlSiN hard coatings”, Thin Solid Films, 517/17 (2009) 4934-4937. (SCI) NSC 97-2221-E-451-005. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.

59.      C.C. Tseng, J.H. Hsieh, S.C. Jang, Y.Y. Chang, W. Wu, “Microstructural analysis and mechanical properties of TaN–Ag nanocomposite thin films”, Thin Solid Films, 517/17 (2009) 4970-4974. (SCI) Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.

60.      Yin-Yu Chang*, Shun-Jan Yang, Weite Wu, “Plasma analyses and structural properties of Cr-N-C-O coatings synthesized by a cathodic arc evaporation process”, Thin Solid Films, 517/14 (2009) 4240-4243. (SCI) NSC 95-2622-E-451-002-CC3. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.

61.      S.M. Yang, Y.Y. Chang, D.Y. Lin, D.Y. Wang, W. Wu, “Thermal stability of TiAlN and nanocomposite TiAlSiN thin films”, Journal of Nanoscience and Nanotechnology, 9 (2009) 1108-1112. (SCI) NSC-95-2221-E-451-002. Impact factor= 1.134; Rank= 137/177 in Chemistry, Multidisciplinary.

62.      Yin-Yu Chang*, Chi-Pang Chang, Da-Yung Wang, Sheng-Min Yang, Weite Wu, “ High temperature oxidation resistance of Cr-Al-Si-N coatings synthesized by a cathodic-arc deposition process”, Journal of Alloys and Compounds, 461 (2008) 336-341. (SCI) NSC-95-2221-E-451-002. Impact factor= 4.650; Rank= 8/79 in Metallurgy & metallurgical engineering.

63.      Sheng-Min Yang, Yin-Yu Chang, Dong-Yih Lin, Da-Yung Wang, Weite Wu, “Mechanical and tribological properties of multilayered TiSiN/CrN coatings synthesized by a cathodic arc deposition process”, Surface & Coatings Technology, 202 (2008) 2176-2181. (SCI) NSC-95-2221-E-451-002. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.

64.      S.M. Yang, Y.Y. Chang, D.Y. Lin, D.Y. Wang, W. Wu, “Microstructure characterization of multilayered TiSiN/CrN thin films”, Journal of Nanoscience and Nanotechnology 8 (2008) 2688–2692. (SCI) NSC-95-2221-E-451-002. Impact factor= 1.134; Rank= 137/177 in Chemistry, Multidisciplinary.

65.      Yin-Yu Chang*, Shun-Jan Yang, Yu-Hsien Liu, Da-Yung Wang, “ Plasma properties of CrOx Films Synthesized by a Cathodic Arc Evaporation Process”, Thin Solid Films, 516/16 (2008) 5536-5540. (SCI) NSC 94-2745-E-007-URD. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.

66.      Yin-Yu Chang, Shun-Jan Yang, Da-Yung Wang, “Structural and Mechanical Properties of Cr-C-O Thin Films Synthesized by a Cathodic Arc Deposition Process”, Surface & Coatings Technology 220 (2007) 941-945. (SCI) NSC 95-2622-E-451-002-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.

67.      Sheng-Min Yang, Yin-Yu Chang, Da-Yung Wang, Dong-Yih Lin, WeiTe Wu, “Mechanical properties of nano-structured Ti-Si-N films syntheized by cathodic arc evaporation”, Journal of Alloys and Compounds, 440(2007) 375-379. (SCI) NSC-95-2221-E-451-002. Impact factor= 4.650; Rank= 8/79 in Metallurgy & metallurgical engineering.

68.      Yin-Yu Chang, Da-Yung Wang, “Characterization of nanocrystalline AlTiN coatings synthesized by a cathodic-arc deposition process”, Surface & Coatings Technology, 201 (2007) 6699-6701. (SCI) NSC-94-2622-E-451-002-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.

69.      Yin-Yu Chang, Shun-Jan Yang, Da-Yung Wang, “Characterization of TiCr(C,N)/amorphous carbon coatings synthesized by a cathodic-arc deposition process”, Thin Solid Films 515 (2007) 4722-4726. (SCI) NSC-94-2218-E-451-005. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.

70.      Ming-che Chen, Che-wei Kuo, Chia-ming Chang, Chih-chun Hsieh, Yin-Yu Chang, Weite Wu, “Diffusion and formation of intermetallic compounds during accumulative roll-bonding of Al/Mg alloys”, Materials Transactions 48 (2007) 2595 – 2598. (SCI) Impact factor= 0.787; Rank= 22/76 in Metallurgy & metallurgical engineering.

71.      Yin-Yu Chang, Shun-Jan Yang, Da-Yung Wang, “Structural and mechanical properties of AlxTi1-xN/CrN coatings synthesized by a cathodic-arc deposition process”, Surface & Coatings Technology, 201 (2006) 4209-4214. (SCI) NSC-94-2622-E-451-002-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.

72.      Yin-Yu Chang, Da-Yung Wang, Chi-Yung Hung, “Mechanical properties of TiAlN/CrN nanolayered coatings synthesized by a cathodic-arc deposition process”, Solid State Phenomena 118 (2006) 323-327. (EI) NSC-94-2622-E-451-002-CC3.

73.      Yin-Yu Chang, Da-Yung Wang, “Structural and electrical properties of Cr doped a-C:H films synthesized by a cathodic-arc activated deposition process”, Surface & Coatings Technology, 200(2006) 3170-3174. (SCI) NSC92-2622-E-451-001-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.

74.      汪大永、張銀祐、洪志穎， “陰極電弧沈積氮化鋁鈦/氮化鉻奈米多層薄膜之開發與應用”， 科學與工程技術，第一卷第二期(2005/09)，pp.1-6。ISBN/1816-6563.

75.      汪大永, 張銀祐, “陰極電弧沈積氮化鉻鋁鈦薄膜之開發與應用”, 陶業季刊, 第二十四卷, 第三期(2005)1-12. ISBN/ 1012-5442.

76.      Yin-Yu Chang, Da-Yung Wang, C.Y. Hung, “Structural and Mechanical Properties of Nanolayered TiAlN/CrN Coatings Synthesized by a Cathodic-Arc Deposition Process”, Surface & Coatings Technology, 200 (2005) 1702-1708. (SCI) NSC93-2622-E-451-001-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.

77.      Da-Yung Wang, Yin-Yu Chang, Yu-Wei Huang, “Deposition of diamond-like carbon films containing metal elements on biomedical Ti alloys”, Surface & Coatings Technology, 200(2005) 2175-2180. (SCI) NSC91-2622-E-451-001-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.

78.      Yin-Yu Chang, Da-Yung Wang, “Corrosion behavior of electroless nickel enhanced by titanium ion implantation”, Surface & Coatings Technology, 200(2005) 2187-2191. (SCI) NSC92-2622-E-451-001-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.

79.      Yin-Yu Chang, Da-Yung Wang, “Structural and electrical properties of nitrogen-doped a-C:H films synthesized by a cathodic-arc activated deposition process”, Thin Solid Films, 485(2005)1-7. (SCI) NSC92-2622-E-451-001-CC3. Impact factor= 2.030; Rank= 9/19 in Materials science, coatings & films.

80.      Yin-Yu Chang, Da-Yung Wang, “Corrosion behavior of CrN coatings enhanced by niobium ion implantation”, Surface & Coatings Technology, 188-189C (2004) 478-483. (SCI) NSC91-2622-E-451-001-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.

81.      Yin-Yu Chang, Da-Yung Wang, Chi-How Chang, WeiTe Wu, “Tribological analysis of nano-composite diamond-like carbon films deposited by unbalanced magnetron sputtering”, Surface & Coatings Technology, 184 (2004) 349-355. (SCI) NSC91-2622-E-451-001-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.

82.      Yin-Yu Chang, Da-Yung Wang, WeiTe Wu, “Tribological Enhancement of CrN Coatings by Niobium and Carbon ion implantation”, Surface & Coatings Technology, 177-178C (2004) 441-446. (SCI) NSC91-2622-E-451-001-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.

83.      Yin-Yu Chang, Da-Yung Wang, WeiTe Wu, “Characterization of Nitrogen-doped a-C:H Films Deposited by Cathodic-arc Activated Deposition Process”, Diamond & Related Materials, 12/10-11 (2003) 2077-2082. (SCI)  NSC91-2622-E-451-001-CC3. Impact factor= 1.709; Rank= 70/225 in Materials science, multidisciplinary.

84.    Yin-Yu Chang, Da-Yung Wang, WeiTe Wu, ”Catalysis effect of metal doping on Wear Properties of Diamond-like Carbon Films deposited by Cathodic-arc Activated Deposition Process”, Thin Solid Films 420–421 (2002) 241–247. (SCI) NSC91-2622-E-451-001-CC3. Impact factor= 2.030; Rank= 9/19 in Materials science, coatings & films. 

國際研討會發表

1.         Yin-Yu Chang*,“From Binary Nitride to High Entropy Alloy Nitride Hard Coatings: Mechanical and Tribological Properties”, THE 22ND INTERNATIONAL VACUUM CONGRESS IVC-22, 日本北海道札幌市，September 11~16, 2022. 邀請演講。

2.         Zong-Hong Tsai, Jun-Ming Tsai, Yin-Yu Chang*, Cheng-Hsi Chung, “Tribological and Mechanical properties of AlCrBN hard coating deposited using cathodic arc evaporation”, TACT2021 International Thin Films Conference, National Taipei University of Technology, Taipei, Taiwan, Nov.15–18, 2021.

3.         Bao-Yu Chang, Chi-Sheng Chen, Yin-Yu Chang*, Cheng-Hsi Chung, “Effect of CrN addition on the mechanical and tribological performances of multilayered AlTiN/CrN/ZrN hard coatings”, TACT2021 International Thin Films Conference, National Taipei University of Technology, Taipei, Taiwan, Nov.15–18, 2021.

4.         Chao-Yu Lee, Yi-Ru Chen, Bao-Yu Chang, Yin-Yu Chang*, “Microwave reflection and transmittance properties of non-conductive CrVZr/grapheneoxide nano-multilayer composite”, TACT2021 International Thin Films Conference, National Taipei University of Technology, Taipei, Taiwan, Nov.15–18, 2021.

5.         Yin-Yu Chang, “Coating Design and Mechanical Properties of Multicomponent AlTi(X)N Hard Coatings”, 47th International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 26-30, 2021. 邀請演講。

6.         Yin-Yu Chang*, Yan-Zhi Chen, “Corrosion resistance and conductivity of CNx coatings deposited by RF-PECVD”, TACT2019 International Thin Films Conference, National Taipei University of Technology, Taipei, Taiwan, Nov.17–20, 2019.

7.         Cheng-Hsi Chung, Yin-Yu Chang*, Chi sheng-Chen, Liang-Chan Chao, “Deposition of AlCrSiN and AlTiCrSiN Hard Coatings and their Mechanical Properties and Cutting Performance”, TACT2019 International Thin Films Conference, National Taipei University of Technology, Taipei, Taiwan, Nov.17–20, 2019.

8.         Yu-Ju Yang, Yin-Yu Chang*, Shi -Yao Weng, “Why Choose an Optimized Interlayer to Improve the Mechanical Properties and Impact Fatigue Resistance of AlTiCr(Si)N Hard Coatings?”, TACT2019 International Thin Films Conference, National Taipei University of Technology, Taipei, Taiwan, Nov.17–20, 2019. TACT-TFS Special Poster Award (Certificate, USD150) (TACT-TFS海報論文特別獎)

9.         Yin-Yu Chang*, Yong Jie Chang, Weng-Tung Chiu, “Nanostructured Hard Coatings- Coating Design and Mechanical Applications”, International Conference on Engineering, Science, and Industrial Applications (ICESI) 2019, Tokyo, Japan, August 22-24, 2019. ISSN 2521-3814.

10.      Yu-Ju Yang*, Yin-Yu Chang, Shi-Yao Weng, “Impact Fatigue and Mechanical Properties of AlTiCrN and AlTiCrSiN Hard Coatings with Optimal Design of Interlayers”, 46th International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, May 19-24, 2019.

11.      Yin-Yu Chang*, Liang-Jhan Jhao, “Microstructure Characterization and Mechanical Properties of Gradient AlCrSiN hard Coatings Using Ternary Alloy Targets”, 45th International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 23-27, 2018.

12.      Yin-Yu Chang*, Chih-Cheng Chuang, “Mechanical and Tribological Properties of Gradient and Multilayered CrVN/CrMoN Coatings”, 45th International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 23-27, 2018.

13.      Rou-An Pan, Yin-Yu Chang*, Heng-Li Huang, Ming-Tzu Tsai, Jui-Ting Hsu, “Biological Characteristics of Tantalum Oxide and Zinc Oxide Coatings on Titanium Pretreated by Plasma Electrolytic Oxidation”, 16th The International Conference on Reactive Sputter Deposition (RSD2017), Plzeň, Czech Republic, December 4-6, 2017. (ISBN 978-80-261-0754-5)

14.      Meng-Chun Cai, Yin-Yu Chang*, “Mechanical property and tribological performance of AlTiSiN and AlTiBN hard coatings using ternary alloy targets”, TACT2017 International Thin Films Conference, National Dong Hwa University, Hualien, Taiwan, October.15-18, 2017. TACT 2017 Best Poster Award (Certificate, USD150) (最佳海報論文獎)

15.      Yin Yu Chang*, Yong Jie Zhang, Siddhant Amrutwar, “Self-lubrication and cutting performance of graded AlTiSiN/TiVN hard coating synthesized by cathodic arc deposition”, TACT2017 International Thin Films Conference, National Dong Hwa University, Hualien, Taiwan, October.15-18, 2017.

16.      Shi-Yao Weng, Yin-Yu Chang, “Influence of interlayer design on the fracture resistance and mechanical properties of AlTiCrN hard coatings”, TACT2017 International Thin Films Conference, National Dong Hwa University, Hualien, Taiwan, October.15-18, 2017.

17.      Yin-Yu Chang*, Liang-Jhan Jhao, Chih-Cheng Chuang, “Tribological and mechanical properties of multilayered TiVN/TiSiN coatings synthesized by cathodic arc evaporation”, TACT2017 International Thin Films Conference, National Dong Hwa University, Hualien, Taiwan, October.15-18, 2017.

18.      Jia-Hao Zhang, Yin-Yu Chang*, “Improvement of antibacterial and tribological properties of Ti-V coated titanium by thermal oxidation”, TACT2017 International Thin Films Conference, National Dong Hwa University, Hualien, Taiwan, October.15-18, 2017.

19.      Shi-Yao Weng, Yin-Yu Chang*,“High temperature oxidation and cutting performance of AlCrN, TiVN and multulayered AlCrN/TiVN hard coatings”, 44th International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 24-28, 2017.

20.  Shi-Yao Weng, Meng-Chun Cai, Yin-Yu Chang*, “Mechanical performance and thermal oxidation and of multilayered AlCrN/TiVN hard coatings synthesized by cathodic arc evaporation”, 20th International Vacuum Congress (IVC-20), Busan, Korea, August 21-26, 2016.

21.  Yi-Jou Lin, Heng-Li Huang, Yin-Yu Chang*, Ming-Tzu Tsai, Jui-Ting Hsu, Yi-Jyun Lin, “Biological characteristic of Ta-Zn-O coated titanium pretreated by plasma electrolytic oxidation”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 25-29, 2016.

22.  Yin-Yu Chang1*, Yu-Chin Chen, Jun-Hao Zhou, Chi-Lung Chang, “Influence of interlayer design on the mechanical properties of AlTiN/TiBN multilayered coatings synthesized by cathodic arc evaporation”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 25-29, 2016.

23.  Yin-Yu Chang*, Wen-Tung Chiu, Jui-Pin Hung, “Mechanical properties and high temperature oxidation of CrAlSiN/TiVN hard coatings synthesized by cathodic arc evaporation”, TACT2015 International Thin Films Conference, National Cheng Kung University, Tainan, Taiwan. Nov.15–18, 2015. The Excellence Prize of the Poster Award (海報優等論文獎)

24.  Yin-Yu Chang*, Jun-Hao Chou, Chung-Yin Tu, “Tribological properties and high temperature oxidation of CrAlSiN/CrWN hard coatings”, TACT2015 International Thin Films Conference, National Cheng Kung University, Tainan, Taiwan. Nov.15–18, 2015. The Merit Prize of the Poster Award (海報論文佳作獎)

25.  Yin-Yu Chang*, Wen-Tung Chiu, Jia-Wei You1, Jia-Cheng Li, “Mechanical properties and tribological performance of CrWN/TiSiN multilayered Coatings”, The thirteenth International Symposium on Sputtering and Plasma Processes (ISSP 2015), Japan, Kyoto, Japan, July 8-10, 2015, Pages 97-100. ISSN: 2187-7637.

26.  Yin-Yu Chang*, Jun-Hao Chou, Hung-Chang, “Thermal stability and mechanical properties of TiVN/CrN multilayered coatings synthesized by cathodic arc deposition”, The thirteenth International Symposium on Sputtering and Plasma Processes (ISSP 2015), Japan, Kyoto, Japan, July 8-10, 2015, Pages 218-221. ISSN: 2187-7637.

27.  Heng-Li Huang, Yin-Yu Chang*, Jia-Xu Liu, Ming-Tzu Tsai, Chih-Ho Lai, “Antibacterial Activity and Cell Compatibility of TiZrN, TiZrCN, and TiZr-amorphous Carbon Coatings”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 20-24, 2015.

28.  Yin-Yu Chang*, Chun-Hsiao Chen, “Microstructure characterization and mechanical properties of CrAlSiTiVN hard coatings synthesized by cathodic arc evaporation”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 20-24, 2015.

29.  Yin-Yu Chang*, “Oxidation resistance and their applications of multicomponent TiAlSiN and CrAlSiN hard coatings synthesized by cathodic arc evaporation”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 28-May 2, 2014.—邀請演講

30.  Yin-Yu Chang*, Hsing-Ming Lai ,Yu-Kai Chou, “Microstructure characterization and mechanical properties of multicomponent CrAlSiTiVN hard coatings”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 28-May 2, 2014.

31.  Heng-Li Huang, Yin-Yu Chang*, Yu-Chen Yang, Chih-Ho Lai, Tzong-Ming, “Biocompatibility and Antimicrobial Performance of TiZrCN Coatings”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 28-May 2, 2014.

32.  Yin-Yu Chang*, Chung-Yin Tu, Heng-Li Huang, “Effect of silver doping on the cytocompatibility and antibacterial properties of tantalum oxide and zirconia coatings”, 72nd IUVSTA workshop『Plasma-assisted vapour deposition of oxide-based thin films and coatings』, Leibnitz, Austria, April 6-11, 2014.

33.  Yin-Yu Chang*, Yu-Chen Yang, “Preferential growth of oxide nanorods on multicomponent TiAlSiN coated stainless steels after thermal oxidation”, The AVS 60th International Symposium and Exhibition, Long beach, USA, Oct.27-Nov.1, 2013.

34.  Yin-Yu Chang*, Yu-Chen Yang, Yu-Kai Chou, Jia-Xu Liu, “Mechanical properties and impact resistance of CrAlSiN and TiAlSiN coatings”, The AVS 60th International Symposium and Exhibition, Long beach, USA, Oct.27-Nov.1, 2013.

35.  Yin-Yu Chang*, Hsing-Ming Lai, Yu-Chen Yang, “Wear behavior and cutting performance of multicomponent hard coatings on cemented carbide cutting tools for Ti alloys”, TACT2013 International Thin Films Conference, Taipei, Taiwan, October 5-9, 2013.

36.  Ming-Tzu Tsai, Yin-Yu Chang*, Heng-Li Huang, Ya-Chi Chen, Yu-Chen Yang, Chih-Ho Lai, Jui-Ting Hsu, “Antibacterial actability and biological characteristics of human fetal skin fibroblast and MG-63 human osteosarcoma cells on tantalum doped carbon films”, TACT2013 International Thin Films Conference, Taipei, Taiwan, October 5-9, 2013.

37.  Yin-Yu Chang*, Heng-Li Huang, Hung-Jui Chen, Chih-Ho Lai, Ming-Tzu Tsai, Jui-Ting Hsu, “Antibacterial Properties and Cytocompatibility of Tantalum Oxide Coatings”, TACT2013 International Thin Films Conference, Taipei, Taiwan, October 5-9, 2013.

38.  Yin-Yu Chang*, Yu-Kai Chou, Yu-Chen Yang, “Impact resistance and mechanical properties of CrAlSiN and TiAlSiN hard coatings”, TACT2013 International Thin Films Conference, Taipei, Taiwan, October 5-9, 2013.

39.  Yin-Yu Chang*, Jia-Xu Liu, Yu-Chen Yang, “Mechanical properties and impact resistance of multilayered TiAlN/ZrN coatings at high temperature”, TACT2013 International Thin Films Conference, Taipei, Taiwan, October 5-9, 2013.

40.  Yin-Yu Chang*, Heng-Li Huang, Hung-Jui Chen, Yu-Kai Chou,Chih-Ho Lai, Michael YC Chen, “Antibacterial Properties and Cytocompatibility of Tantalum Oxide Coatings with Different Silver Contents”, International Symposium on Sputtering and Plasma Processes (ISSP 2013), Kyoto, Japan, July 10-12, 2013.

41.  Heng-Li Huang, Yin-Yu Chang*, Ya-Chi Chen, Chih-Ho Lai, Michael YC Chen, “Cytocompatibility and Antibacterial Properties of Zirconia Coatings with Different Silver Contents on Titanium”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 29-May 3, 2013.

42.  Ming-Tzu Tsai, Yin-Yu Chang*, Ya-Chi Chen, Jui-Ting Hsu, Heng-Li Huang, “The biological characteristics of MG-63 human osteosarcoma cell line and human gingival fibroblast cells on tantalum doped carbon films”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 29-May 3, 2013.

43.  Yin-Yu Chang*, Hsing-Ming Lai, Ho-Yi Kao, “High temperature wettability of ion implanted multicomponent CrAlSiN by molten glass”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 29-May 3, 2013.

44.  Yin-Yu Chang*, “Mechanical properties and their applications of multicomponent hard coatings synthesized by cathodic arc evaporation”, 第八屆海峽兩岸薄膜科學與技術研討會, 寧波, 中國, October 30-31, 2012. – 邀請演講

45.  Yin-Yu Chang*, Chia-Yuan Hsiao, “Structural and mechanical properties of multilayered ZrN/CrAlN coatings synthesized by a cathodic-arc deposition process”, 4th International Scientific Conference- Management of Technology Step to Sustainable Production, Zadar, Croatia, June 14-16, 2012. ISSN 1848-5022. Paper print: ISSN 1847-6880. pp. 214-221.

46.  Ming-Tzu Tsai, Yin-Yu Chang*, Ya-Chi Chen, Heng-Li Huang, Jui-Ting Hsu, “Characterization and antibacterial performance of biocompatible Ti-Zn-O coatings deposited on titanium implants”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 23-27, 2012.

47.  Heng-Li Huang, Yin-Yu Chang*, Jui-Ching Weng, Ya-Chi Chen, Chih-Ho Lai, Tzong-Ming Shieh, “Anti-bacterial Performance of Zirconia Coatings on Titanium Implants”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 23-27, 2012.

48.  Yin-Yu Chang*, Yau-Yi Liou, “Mechanical properties and oxidation resistance of TiSiN/CrAlN films synthesized by a cathodic arc deposition process”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 23-27, 2012.

49.  Yin-Yu Chang*, Ching-Yu Tsai, “Influence of Bias Voltage on Residual Stresses and Mechanical Properties of Multicomponent TiSiCrAlN Coatings”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 23-27, 2012.

50.  Yin-Yu Chang*, ”Mechanical properties and thermal stability of multicomponent coatings synthesized by cathodic arc evaporation”, TACT2011 International Thin Films Conference, Kenting, Taiwan, November 20-23, 2011. – 邀請演講

51.  Yin-Yu Chang*, Ya-Chi Chen, Jui-Ching Weng, Heng-Li Huang, Chih-Ho Lai, “Characterization and antibacterial performance of ZrNO-Ag coatings”, TACT2011 International Thin Films Conference, Kenting, Taiwan, November 20-23, 2011. –The Third Prize of the Poster Award. –海報論文獎第三名.

52.  Yin-Yu Chang*, Chih-Ming Cheng, Yau-Yi Liou, Wolfgang Tillmann, Fabian Hoffmann, Tobias Sprute, “High temperature wettability of multicomponent CrAlSiN and TiAlSiN coatings by molten glass”, TACT2011 International Thin Films Conference, Kenting, Taiwan, November 20-23, 2011.

53.  Yin-Yu Chang*, Chen-Jui Wu, “Mechanical properties and impact resistance of multilayered TiAlN/ZrN coatings”, TACT2011 International Thin Films Conference, Kenting, Taiwan, November 20-23, 2011. –The Third Prize of the Poster Award. –海報論文獎第三名.

54.  Yun-Shao Cho, Yin-Yu Chang*, Shui-Yang Lien, Chia-Fu Chen, “Optimization of amorphous silicon thin film solar cell processes by using optical emission spectroscopy”, TACT2011 International Thin Films Conference, Kenting, Taiwan, November 20-23, 2011. –The 2nd Prize of the Poster Award. –海報論文獎第二名.

55.  Wolfgang Tillmann, Tobias Sprute, Fabian Hoffmann, Yin-Yu Chang, Ching-Yu Tsai, “Influence of Bias Voltage on Residual Stresses and Tribological Properties of TiAlVN-Coatings at Elevated Temperatures”, TACT2011 International Thin Films Conference, Kenting, Taiwan, November 20-23, 2011.

56.  Yin-Yu Chang*, “High temperature oxidation of nanocomposite TiAlSiN thin films”, 第七屆海峽兩岸薄膜科學與技術研討會, 墾丁, Taiwan, November 20-23, 2011. – 邀請演講

57.  Yin-Yu Chang*, Chen-Jui Wu, Ho-Yi Kao, “Preferential growth of oxide nanorods on multicomponent TiAlSiN coated stainless steels after thermal oxidation”, The 11th International Symposium on Sputtering and Plasma Processes (ISSP2011), Kyoto, Japan, July 6-8, 2011. ISSN: 0917-2440

58.  Heng-Li Huang, Yin-Yu Chang*, Ho-Yi Kao, Chih-Ho Lai, Tzong-Ming Shieh, “Characterization and antibacterial performance of ZrCN/amorphous carbon coatings deposited on titanium implants”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, May 2-6, 2011.

59.  Yin-Yu Chang*, Chia-Yuan Hsiao, Tung-Han Yang, “Structural and mechanical properties of multilayered ZrN/CrAlN coatings synthesized by a cathodic-arc deposition process”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, May 2-6, 2011.

60.  Yin-Yu Chang*, Ho-Yi Kao, Wen-Hsiung Wu, “Microstructures and mechanical properties of nano-structured TiAlCN/amorphous carbon films”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, May 2-6, 2011.

61.  Yin-Yu Chang*, Shui-Yang Lien, Yun-Shao Cho, Chia-Fu Chen, “Influence of process conditions on layer properties of HF-PECVD amorphous Si thin film solar cells by optical emission spectroscopy”, 2011 AVS international plasma workshop, Taipei, Taiwan, March 22-25, 2011. –The Best Poster Award. –海報論文優等獎.

62.  Yin-Yu Chang*, Chi-Pang Chang, Chih-Ming Cheng, “High temperature oxidation performance of multilayered AlxTi1-xN/CrN coatings”, AVS 57th International Symposium and Exhibition, Albuquerque, NM, USA, October 17-22, 2010.

63.  Yin-Yu Chang*, Yaw-Nan Shieh, Ho-Yi Kao, “Optical Properties of Nano-crystalline TiO2 Thin Film after Ag Ion Implantation”, 10th APCPST (Asia Pacific Conference on Plasma Science and Technology) and 23th SPSM (Symposium on Plasma Science for Materials), Jeju, Korea, July 4-8, 2010.

64.  Yin-Yu Chang*, Chi-Pang Chang, Ho-Yi Kao, “High temperature oxidation resistance of multilayered AlTiN/CrN coatings”, 10th APCPST (Asia Pacific Conference on Plasma Science and Technology) and 23th SPSM (Symposium on Plasma Science for Materials), Jeju, Korea, July 4-8, 2010.

65.  Yin-Yu Chang, Chia-Yuan Hsiao, “Mechanical properties of multilayered AlxCr1-xN/ZrN coatings synthesized by a cathodic-arc deposition process”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 26-30, 2010.

66.  Yin-Yu Chang, Chia-Chi Hung, Wei-Yeh Chang, “Structural and mechanical properties of multilayered AlTiN/ZrN coatings”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 26-30, 2010.

67.  Yin-Yu Chang, Meng-Cheng Lai, Tsai-Jung Lin, Heng-Li Huang, Chih-Ho Lai, Tzong-Ming Shieh, “Anti-bacterial TaN-Ag Coatings on Titanium Dental Implants”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 26-30, 2010.

68.  Yin-Yu Chang, Ho-Yi Kao, “Effect of carbon on the tribological performance of nano-structured AlTiCN films”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 26-30, 2010.

69.  Yin-Yu Chang, Ren-Hao Yang, Kuan-chieh Tseng, Ching-Yu Tsai, “Optical properties of multilayered metal/amorphous carbon coatings”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 26-30, 2010.

70.  P. Vijai Bharathy; Yin-Yu Chang, D. Nataraj, Q. Yang, D. Mangalaraj, Lei Yang, Thomas J. Webster, “Effect of nickel incorporation on structural, nanomechanical and biocompatible properties of amorphous hydrogenated carbon thin films prepared by low energy biased target ion beam deposition”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 26-30, 2010.

71.  Yin-Yu Chang, Chi-Pang Chang, Chih-Ming Cheng, “Thermal stability of graded and multilayered AlxTi1-xN/CrN coatings”, TACT2009 International Thin Films Conference, Taipei, Taiwan, December 14-16, 2009.

72.  Yin-Yu Chang, Yaw-Nan Shieh, “Influence of Cobalt Ion Implantation on Optical Properties of Titanium Dioxide Thin Films”, TACT2009 International Thin Films Conference, Taipei, Taiwan, December 14-16, 2009.

73.  Yin-Yu Chang, Chih-Ho Lai, Jui-Ting Hsu, Chih-Hsin Tang, Wan-Chuen Liao, Heng-Li Huang, “Antibacterial potential of Ag/TiO2 compound coatings and ZnO films on titanium-based materials”, TACT2009 International Thin Films Conference, Taipei, Taiwan, December 14-16, 2009.

74.  Tung-Sheng Yang, Sheng-Yi Chang, Yin-Yu Chang, “Study on mechanical characteristics of TiAlN/CrN multilayered on different substrate by Cathodic Arc Deposition process”, TACT2009 International Thin Films Conference, Taipei, Taiwan, December 14-16, 2009.

75.      Wan-Chuen Liao, Chih-Ho Lai, Yin-Yu Chang, Heng-Li Huang, Jui-Ting Hsu, “Antimicrobial effects of Ag/TiO2 compound coatings and ZnO films on titanium-based surface”, American Dental Association Annual Session 2009/Densply Student Clinical Research Program, Hawaii, USA, 2009.

76.  Wan-Chuen Liao, Chih-Ho Lai, Yin-Yu Chang, Heng-Li Huang, Jui-Ting Hsu, “Antimicrobial effects of Ag/TiO2 compound coatings and ZnO films on titanium based surface”, World Congress 2009-Medical Physics and Biomedical Engineering, Munich, Germany, 2009.

77.      Jui-Ting Hsu, Li-Chun Wu, Yin-Yu Chang, Tzu-Ning Weng, Heng-Li Huang, Chein-Hung Yu, “Frictional forces of conventional and improved superelastic NiTi-Alloy orthodontic archwires in stainless steel and plastic brackets”, World Congress 2009-Medical Physics and Biomedical Engineering, Munich, Germany, 2009.

78.      Yin-Yu Chang, Yaw-Nan Shieh, Chih-Ming Cheng, “Optical Properties of Nano-crystalline TiO2 Thin Film after Ag Ion Implantation”, International Conference on Nanoscience & Technology (ChinaNANO2009), Beijing, China, September 1-3, 2009.

79.      Shui-Yang Lien, Yin-Yu Chang, Jui-Hao Wang, Ko-Wei Weng, Ching-Hsun Chao, Chia-Fu Chen, “Characterization of HF-PECVD a-Si:H thin film solar cells using by OES studies”, The 10th International Symposium on Sputtering and Plasma Processes (ISSP2009), Kanazawa, Japan, July 8-10, 2009. ISSN: 0917-2440.

80.      Yin-Yu Chang, Chih-Ming Cheng, Sheng-Min Yang, “High Temperature oxidation behavior of multicomponent TiAlSiN coatings”, The 10th International Symposium on Sputtering and Plasma Processes (ISSP2009), Kanazawa, Japan, July 8-10, 2009. ISSN: 0917-2440.

81.      Yin-Yu Chang, Chi-Pang Chang, Chia-Yuan Hsiao, Da-Yung Wang, “Structural and mechanical properties of graded and multilayered AlxTi1-xN/CrN coatings synthesized by a cathodic-arc deposition process”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 27-May 1, 2009.

82.      Chia-Yuan Hsiao, Yin-Yu Chang, Da-Yung Wang, Weite Wu, “High temperature oxidation resistance of multicomponent Cr-Ti-Al-Si-N coatings”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 27-May 1, 2009.

83.      Yin-Yu Chang, Chia-Chun Hsueh, Pei-Jung Lin, Hui-Ting Hsu, Da-Yung Wang, “Anti-Bacterial TiNx-Ag Coatings on Titanium Dental Implants”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 27-May 1, 2009.

84.      Yin-Yu Chang, “Approaches to superhard multicomponent TiAlSiN and CrAlSiN coatings”, 第四屆海峽兩岸薄膜科學技術研討會, 廈門, 中國, September 11-13, 2008. (邀請演講)

85.      Yin-Yu Chang, Shun-Jan Yang, Weite Wu, “Plasma analyses and structural properties of Cr-N-C-O coatings synthesized by a cathodic arc evaporation process”, 1st International Conference on Microelectronics and Plasma Technology (ICMAP2008), Jeju, Korea, August 18-20, 2008.

86.      Yin-Yu Chang, Chi-Pang Chang, “High temperature stability of multicomponent TiAlSiN and CrAlSiN coatings”, Thin Films 2008, Singapore, July 13-16, 2008.

87.      Yin-Yu Chang, Shun-Jan Yang, Da-Yung Wang, Weite Wu, Yu-Chu Kuo, Jyh-Wei Lee, Chaur-Jeng Wang, “Mechanical properties of gradient and multilayered TiAlSiN hard coatings”, Thin Films 2008, Singapore, July 13-16, 2008.

88.      Yin-Yu Chang , Shun-Jan Yang , Da-Yung Wang , Weite Wu, “Mechanical properties of gradient and multilayered TiAlSiN hard coatings”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 28-May 2, 2008.

89.      Yaw-Nan Shieh, Yin-Yu Chang, Chih-Jung Su, Da-Yung Wang, “Electronic and optical properties of nano-crystalize TiO2 thin film after metal ion implantation”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 28-May 2, 2008.

90.      Yin-Yu Chang, Chi-Pang Chang, Sheng-Min Yang, Da-Yung Wang, Weite Wu,“Thermal stability of TiAlSiN and CrAlSiN thin films”, AVS 54th International Symposium and Exhibition, Seattle, WA, USA, October 14-19, 2007.

91.      Yin-Yu Chang, Yaw-Nan Shieh, Chih-Jung Su, Da-Yung Wang, “Effect of metal ion implantation on the structural and optical properties of nanocrystalline TiO2 films”, The Sixth Asian-European International Conference on Plasma Surface Engineering, Yasuragi-Ioujima Nagasaki, Japan, September 24-28, 2007.

92.      Yin-Yu Chang, Shun-Jan Yang, Chi-Pang Chang, Da-Yung Wang, “Structural and mechanical properties of Cr-N-C-O coatings synthesized by a cathodic arc evaporation process”,  The 6th International Conference on Materials Processing for Properties and Performance (MP3), Beijing International Convention Center, Beijing, China, 13 - 16 September 2007, ISBN: 978-981-05-9014-7, ID1373.

93.      Y.Y. Chang, S.M. Yang, D.Y. Lin, D.Y. Wang, W. Wu, “Thermal stability of TiAlN and nanocomposite TiAlSiN thin films”, International Conference on Nanoscience & Technology (ChinaNANO2007), Beijing, China, June 4-6, 2007.

94.      Yin-Yu Chang, Shun-Jan Yang, Da-Yung Wang, “Structural and Mechanical Properties of Cr(C,O) Thin Films Synthesized by a Cathodic Arc Deposition Process”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 30-May 5, 2007.

95.      Yin-Yu Chang, Chi-Pang Chang, Da-Yung Wang, “ High temperature oxidation resistance and electrical properties of Cr-Al-Si-N coatings synthesized by a cathodic-arc deposition process”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 30-May 5, 2007.

96.  S.M. Yang, Y.Y. Chang, D.Y. Lin, D.Y. Wang,W. Wu, “TEM investigation of the microstructure of multilayered TiSiN/CrN thin films”, Thin Films 2006, Singapore, December 11-15, 2006.

97.      Yin-Yu Chang, Yu-Hsien Liu, Shun-Jan Yang, Da-Yung Wang, “ Plasma properties of CrOx Films Synthesized by a Cathodic Arc Evaporation Process”, Thin Films 2006, Singapore, December 11-15, 2006.

98.  D.Y. Wang, J.J. Hwang, C.L. Chang, C.H. Wan, Y.Y. Chang, “Status and Recent Progress in Fuel Cell Development at MingDao University in Taiwan”, The 6th international Advanced Automotive Battery Conference, Baltimore, USA, May 15-19, 2006.

99.      S.M. Yang, Y.Y. Chang, W.T. Wu, D.Y. Wang, “Mechanical properties of Nano-Structured Ti-Si-N Films Syntheized by Cathodic Arc Evaporation”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, May 1-5, 2006. NSC-94-2218-E-451-005.

100.  Y.Y. Chang, S.M. Yang, D.Y. Lin, J. Lo, W. Wu, D.Y. Wang, “ The Oxidative Behavior Induces Phase Transformation in Ti-Si-N Films”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, May 1-5, 2006. NSC-94-2218-E-451-005.

101.  Yin-Yu Chang, Shun-Jan Yang, Da-Yung Wang, “ Structural and mechanical properties of AlxTi1-xN/CrN coatings synthesized by a cathodic-arc deposition process”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, May 1-5, 2006. NSC-94-2622-E-451-002-CC3.

102.  Yin-Yu Chang, Da-Yung Wang, and Yung-Feng Hou, “Plasma Diagnosis of Cr1-xCx Films synthesized by a cathodic arc evaporation process“, The 4th Asia-Pacific International Symposium on the Basics and Applications of Plasma Technology , Douliou, Yunlin, Taiwan. December 12-14, 2005. ISBN / 986-00-3297-1(平裝) NSC-92-2622-E-451-001-CC3.

103.  Da-Yung Wang, Yin-Yu Chang, Chi-Yung Hung “Mechanical properties of TiAlN/CrN nanolayered coatings synthesized by a cathodic-arc deposition process”, The 3rd Asian Conference on Heat Treatment of Materials, Gyeongiu, Korea, Nov. 10-12, 2005. NSC93-2622-E-451-001-CC3.

104.  Yin-Yu Chang, Da-Yung Wang, “Characterization of nanocomposite AlTiN coatings synthesized by a cathodic-arc deposition process”, 8th International Workshop on Plasma-based ion implantation and deposition (PBII&D), Chengdu, Sichuan province, China, September 18 and 22, 2005. NSC93-2622-E-451-001-CC3.

105.  Yin-Yu Chang, Da-Yung Wang, Chi-Yung Hung, “Structural and Mechanical Properties of Nanocomposite TiAlCrN Coatings Synthesized by a Cathodic-Arc Deposition Process”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, May 2-6, 2005.  NSC93-2622-E-451-001-CC3.

106.  Da-Yung Wang, Yin-Yu Chang, “Structural and electrical properties of Cr doped a-C:H films synthesized by a cathodic-arc activated deposition process”, ACVD-Ш(2004), Taipei, Taiwan. NSC92-2622-E-451-001-CC3.

107.  Da-Yung Wang, Yin-Yu Chang, WeiTe Wu, “Corrosion Behavior of CrN Coatings Enhanced by Niobium Ion Implantation”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 19-23, 2004. NSC92-2622-E-451-001-CC3.

108.  Da-Yung Wang, Yin-Yu Chang, WeiTe Wu, “Plasma Diagnosis of a-C:H Films Synthesized by a Cathodic Arc Activated Deposition Process”, 9th International Conference New Diamond Science and Technology, Tokyo, Japan, March 26-29, 2004. NSC91-2622-E-451-001-CC3.

109.  Yin-Yu Chang, Da-Yung Wang, WeiTe Wu “Tribological Enhancement of CrN Coatings by Niobium and Carbon ion implantation”, International Conference on Metallurgical Coatings and Thin Films, , San Diego, California, USA, April 28-May 2, 2003. NSC91-2622-E-451-001-CC3.

110.  Da-Yung Wang, Yin-Yu Chang, “Tribological analysis of nano-composite diamond-like carbon films deposited by unbalanced magnetron sputtering”, AVS 49th International conference, Denver, Colorado, USA, November 3-8, 2002. NSC91-2622-E-451-001-CC3.

111.  Yin-Yu Chang, Da-Yung Wang, WeiTe Wu, “Characterization of Nitrogen-doped a-C:H Films Deposited by Cathodic-arc Activated Deposition Process”, 8th International Conference New Diamond Science and Technology, Melbourne, , Victoria, Australia, July 21-26, 2002. NSC91-2622-E-451-001-CC3.

112.  Da-Yung Wang,Yin-Yu Chang, WeiTe Wu, ”Catalysis effect of metal doping on Wear Properties of Diamond-like Carbon Films deposited by Cathodic-arc Activated Deposition Process”, International Conference on Metallurgical Coatings and Thin Films, San Diego, California, USA, April 22-26, 2002. NSC91-2622-E-451-001-CC3.