Embedded Files
When changing the network connection method once set up
I will introduce the flow of network connection change as an example when changing wired LAN connection to WiFi connection.
<Preliminary preparation>· It is recommended to remove the camera connected to Raspberry Pi to strengthen Bluetooth connection.
From the "Device list" of "SCORER Starter", set the network again.
From the "Device list" of "SCORER Starter", set the network again.
1) Disconnect the LAN cable from Raspberry Pi.
2) When logging in to SCORER Starter, the "Device list" screen will be displayed. Confirm that the Bluetooth mark is displayed next to the corresponding Raspberry Pi name and tap Raspberry Pi name.
* If two same Raspberry Pi names are displayed, please tap the one with the Bluetooth mark displayed.
3) The "Menu" screen will appear. Tap [Connect to network].
From here , perform the procedure from step 5) of the method of setting network connection / Wifi connection setting (iOS only) .
Report abuse