When using Raspberry Pi

How to access Device Control

You can set the resolution, angle of view, detection function, etc. of the camera connected to Raspberry Pi using SCORER Edge 's Device Control (hereinafter referred to as Device Control). Also, since it can be accessed from a smartphone / PC, it is possible to adjust the angle of view from the smartphone on the spot when installing the camera.


<Notes>· The smartphone / PC that performs Device Control setting needs to connect to the same network as Raspberry Pi. · It is necessary to set Raspberry Pi network connection from "SCORER Starter" in advance. · Device Control is a function of SCORER Edge installed in Raspberry Pi. There is a possibility that the version will be upgraded irregularly, but please understand beforehand because it will be operated in the version at the time of installation.

How to connect to Device Control

  • Device Control accesses Raspberry Pi's IP address directly and operates on the browser.
  • In the browser of the smartphone or PC, enter the IP address of Raspberry Pi and ": 20001" behind it.

Device Control URL: http: // ** IP address of Raspberry Pi ** : 20001 /

From "SCORER Starter", it is easy to copy / access the Device Control URL.

1) When you log in to SCORER Starter, the "Device list" screen will be displayed, press and hold the target Raspberry Pi name portion.

2) Device control URL information is displayed.

① Copy URL

It becomes the URL of Device Control of the selected device. It is possible to copy the Device Control URL and paste it into text or browser.

② Open Device Control

Tap to access Device Control.

⇒ When connecting to Device Control, configure the function.