Safety in the i-Gen Studio

General Safety:

1. No activities should be conducted without the presence of a Design and Technology teacher or instructor.

2. Long hair must be tied back during activities.

3. Sleeves should be rolled up, and ties removed before engaging in activities.

4. Covered shoes must be worn at all times.

5. Clean up work areas after each activity.

6. Ensure all tools and equipment are in good condition before use. Report any defects to the instructor immediately.

7. Use materials, tools, and equipment as intended.

8. Maintain a safe distance from hot surfaces and tools.

9. Dispose of sharp items (e.g. needles, razors, pins) in designated containers with lids.

Use of 3D Printers:

10. Be aware of the Guns, Explosives and Weapons Control Act (GEWCA) 2021. It is an offence to use a 3D printer to print (manufacture) or attempt to print (manufacture) any arms or any component part of any arms, including blueprint (e.g. stored in computer in school) without a license (see online link to Sections 12 and 13 of GEWCA).

11. Record details of all printed items in the logbook.

12. Use a scraper to remove prints from heated printer beds to prevent burns.

Use of Laser Cutting Machines:

13. Never look directly at or reflect a laser beam, including off lens surfaces.

14. Do not use binoculars or telescopes to view laser beams.

15. Always stay with the laser cutter during operation; never leave it unattended.

16. Keep the area around the laser cutter clean, and free of combustible materials, explosives, and volatile substances (e.g., acetone, alcohol, gasoline).

17. Avoid engraving on glass as it can produce shards that may cause injuries.