Embedded Files
9/27/2023 Robot Physics in Engineering
9/27/2023 Robot Physics in Engineering
Soldering is when you dissolve solder onto a wire connected to a circuit to stabilize it.
The purpose of soldering is to electrically connect electronic components.
A melting point is the temperature that a certain object liquifies.
Copper has a higher melting point than copper because solder melts faster than copper. For example, when you melt solder, the solder melts, as the wire doesn't, even though they both undergo the same temperature.
Drawing in Engineering Class
Drawing in Engineering Class
Box
Box with flaps
Disc top view
Disc front view
Why is drawing important in an engineering class in addition to an art class? It is important because you can use it to draw sketches. The sketches need to be legible and accurate so it would be easier to begin working on the certain task the sketch is for.
Pico Chaser Pattern
Pico Chaser Pattern
This is my Pico Chaser pattern. The pattern goes in a rotation and on every GP The code I have for it is written so that I can easily tell which code goes to which GP. I also have the entire code on GitHub. The serial monitor shows your error message on your code.
8/18/23 Drawing in Onshape in Engineering Class
8/18/23 Drawing in Onshape in Engineering Class
Robot Wheel
Drawing Practice
Chassy
Car
To make the Robot Wheel, I used the Center point circle. To make the Drawing Practice, I used Corner Rectangle and Dimension. For the Chassy, I used corner rectangle, dimension, and mirror. For the car, I used center circle, sketch fillet, offset, and dimension.
9/6/2023 Onshape Drawing Practice
9/6/2023 Onshape Drawing Practice
Grid
I used the linear pattern to make this
Flower Design
I used offset and mirror tools
Free Form Tool Practice, for this we had to use Linear Pattern, Mirror, Offset, and Fillet
Artistic eclipse
I used the offset tool
Page updated
Report abuse